
[Federal Register Volume 81, Number 222 (Thursday, November 17, 2016)]
[Notices]
[Page 81116]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-27579]



[[Page 81116]]

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2013-0345; FRL-9953-00-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Metal Can Manufacturing Surface 
Coating (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency has submitted an 
information collection request (ICR), ``NESHAP for Metal Can 
Manufacturing Surface Coating (40 CFR part 63, subpart KKKK) 
(Renewal)'' (EPA ICR No. 2079.06, OMB Control No. 2060-0541), to the 
Office of Management and Budget (OMB) for review and approval in 
accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.). 
This is a proposed extension of the ICR, which is currently approved 
through November 30, 2016. Public comments were previously requested 
via the Federal Register (81 FR 26546) on May 3, 2016 during a 60-day 
comment period. This notice allows for an additional 30 days for public 
comments. A fuller description of the ICR is given below, including its 
estimated burden and cost to the public. An Agency may neither conduct 
nor sponsor, and a person is not required to respond to, a collection 
of information unless it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before December 19, 
2016.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2013-0345, to: (1) EPA online using www.regulations.gov (our 
preferred method), or by email to docket.oeca@epa.gov, or by mail to: 
EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 
1200 Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email 
to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer 
for EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change, including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI), or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. 
NW., Washington, DC 20460; telephone number: (202) 564-2970; fax 
number: (202) 564-0050; email address: yellin.patrick@epa.gov.

SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail 
the information that the EPA will be collecting are available in the 
public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, WJC West, 
Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: http://www.epa.gov/dockets.
    Abstract: The affected entities are subject to the General 
Provisions of the NESHAP for Metal Can Manufacturing Surface Coating 
(40 CFR part 63, subpart A), and any changes, or additions, to the 
Provisions are specified at 40 CFR part 63, subpart KKKK. Owners or 
operators of the affected facilities must submit a one-time-only report 
of any physical or operational changes, initial performance tests, and 
periodic reports and results. Owners or operators are also required to 
maintain records of the occurrence and duration of any startup, 
shutdown, or malfunction in the operation of an affected facility, or 
any period during which the monitoring system is inoperative. Reports 
are required semiannually at a minimum.
    Form Numbers: None.
    Respondents/affected entities: Metal can manufacturing facilities 
that use 1,500 gallons or more of surface coatings.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart KKKK).
    Estimated number of respondents: 5 (total).
    Frequency of response: Initially, occasionally and semiannually.
    Total estimated burden: 1,940 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $206,000 (per year), which includes $6,000 in 
annualized capital/startup or operation & maintenance costs.
    Changes in the Estimates: There is a small adjustment increase of 2 
respondent labor hours due to rounding of all total calculated values 
to three significant digits. The increase is not due to any program 
change.

Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2016-27579 Filed 11-16-16; 8:45 am]
BILLING CODE 6560-50-P


