[Federal Register Volume 84, Number 74 (Wednesday, April 17, 2019)]
[Notices]
[Pages 16011-16012]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-07675]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2012-0534; FRL-9991-88-OMS]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NSPS for Surface Coating of Plastic Parts 
for Business Machines (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) has submitted an 
information collection request (ICR), NSPS for Surface Coating of 
Plastic Parts for Business Machines (EPA ICR Number 1093.12, OMB 
Control Number 2060-0162), to the Office of Management and Budget (OMB) 
for review and approval in accordance with the Paperwork Reduction Act. 
This is a proposed extension of the ICR, which is currently approved 
through April 30, 2019. Public comments were previously requested, via 
the Federal Register, on May 30, 2018 during a 60-day comment period. 
This notice allows for an additional 30 days for public comments. A 
fuller description of the ICR is given below, including its estimated 
burden and cost to the public. An agency may neither conduct nor 
sponsor, and a person is not required to respond to, a collection of 
information unless it

[[Page 16012]]

displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before May 17, 2019.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2012-0534, to: (1) EPA online using www.regulations.gov (our 
preferred method), or by email to [email protected], or by mail to: 
EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 
1200 Pennsylvania Ave. NW, Washington, DC 20460; and (2) OMB via email 
to [email protected]. Address comments to OMB Desk Officer 
for EPA.
    EPA's policy is that all comments received will be included in the 
public docket, without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI), or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, 
Washington, DC 20460; telephone number: (202) 564-2970; fax number: 
(202) 564-0050; email address: [email protected].

SUPPLEMENTARY INFORMATION: Supporting documents, which explain in 
detail the information that the EPA will be collecting, are available 
in the public docket for this ICR. The docket can be viewed online at 
www.regulations.gov, or in person at the EPA Docket Center, WJC West, 
Room 3334, 1301 Constitution Ave. NW, Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: http://www.epa.gov/dockets.
    Abstract: The New Source Performance Standards (NSPS) for Surface 
Coating of Plastic Parts for Business Machines (40 CFR part 60 subpart 
TTT) were proposed on January 8, 1986, promulgated on January 29, 1988, 
and amended on October 17, 2000. These regulations apply to new 
facilities that perform industrial surface coating operations on 
plastic parts for use in the manufacture of business machines: Each 
spray booth that applies prime coats, color coats, texture coats or 
touch-up coats. New facilities include those that commenced 
construction, modification, or reconstruction after the date of 
proposal. This information is being collected to assure compliance with 
40 CFR part 60, subpart TTT.
    In general, all NSPS standards require initial notifications, 
performance tests, and periodic reports by the owners/operators of the 
affected facilities. They are also required to maintain records of the 
occurrence and duration of any startup, shutdown, or malfunction in the 
operation of an affected facility, or any period during which the 
monitoring system is inoperative. These notifications, reports, and 
records are essential in determining compliance, and are required of 
all affected facilities subject to NSPS.
    Form Numbers: None.
    Respondents/affected entities: Facilities that perform industrial 
surface coating on plastic parts for business machines.
    Respondent's obligation to respond: Mandatory (40 CFR part 60, 
subpart TTT).
    Estimated number of respondents: 10 (total).
    Frequency of response: Initially, quarterly and semiannually.
    Total estimated burden: 992 hours (per year). Burden is defined at 
5 CFR 1320.3(b).
    Total estimated cost: $113,000 (per year), which includes $0 in 
annualized capital/startup and/or operation & maintenance costs.
    Changes in the Estimates: There is no change in the labor hours in 
this ICR compared to the previous ICR. This is due to two 
considerations: (1) The regulations have not changed over the past 
three years and are not anticipated to change over the next three 
years; and (2) the growth rate for the industry is very low, negative 
or non-existent, so there is no significant change in the overall 
burden.

Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2019-07675 Filed 4-16-19; 8:45 am]
 BILLING CODE 6560-50-P


