SF-83 SUPPORTING STATEMENT

ENVIRONMENTAL PROTECTION AGENCY

NESHAP for Semiconductor Manufacturing

1.  Identification of the Information Collection

	1(a)  Title of the Information Collection

NESHAP for Semiconductor Manufacturing (40 CFR part 63, subpart BBBBB)
(Renewal)

	1(b)  Short Characterization/Abstract

The National Emission Standards for Hazardous Air Pollutants (NESHAP),
for semiconductor manufacturing were proposed on May 8, 2002, (67 FR
30848), and promulgated on May 22, 2003, (68 FR 27925).  These
regulations apply to each new, reconstructed, or existing affected major
source that emits or has the potential to emit, considering controls, in
the aggregate, any single hazardous air pollutants (HAP) at a rate of 10
tons per year (typ) or more or any combination of HAP at a rate of 25
typ or more.  Semiconductor manufacturing process units are used to
manufacture p-type and n-type semiconductors and active solid-state
devices from a water substrate, including research and development
activities integrated into a semiconductor manufacturing process unit. 
A semiconductor manufacturing process unit includes the equipment
assembled and connected by ductwork or hard-piping including furnaces
and associated unit operations; associated wet and dry work benches;
associated recovery devices; feed, intermediate, and product storage
tanks; product transfer racks and connected ducts and piping; pumps,
compressors, agitators, pressure-relief devices, sampling connecting
systems, open-ended valves or lines, valves, connectors, and
instrumentation systems; and control devices.

	In general, all NESHAP standards require initial notifications,
compliance status report, and performance tests by the owners/operators
of the affected facilities.  They are also required to maintain records
of the occurrence and duration of any startup, shutdown, or malfunction
(SSM) in the operation of an affected facility, or any period during
which the monitoring system is inoperative.  These notifications,
reports, and records are essential in determining compliance, and are
required of all affected facilities subject to NESHAP.  Semiannual
summary reports are also required.

	Any owner/operator subject to the provisions of this part shall
maintain a file of these measurements, and retain the file for at least
five years following the date of such measurements, maintenance reports,
and records.  All reports are sent to the delegated state or local
authority.  In the event that there is no such delegated authority, the
reports are sent directly to the United States Environmental Protection
Agency (EPA) regional office.

	Based on our consultations with industry representatives, there is an
average of one affected facility at each plant site and that each plant
site has only one respondent (i.e., the owner/operator of the plant
site).

	There is only one respondent that will be subject to the regulation
over the period covered by this ICR, and it is estimated that no
additional respondents will become subject to the regulation in the next
three years.

The Office of Management and Budget (OMB) approved the current
Information Collection Request (ICR) without any “Terms of
Clearance.”

2.  Need for and Use of the Collection

	2(a)  Need/Authority for the Collection

The EPA is charged under Section 112 of the Clean Air Act, as amended,
to establish standards of performance for each category or subcategory
of major sources and area sources of hazardous air pollutants.  These
standards are applicable to new or existing sources of hazardous air
pollutants and shall require the maximum degree of emission reduction. 
In addition, section 114(a) states that the Administrator may require
any owner/operator subject to any requirement of this Act to:

(A) Establish and maintain such records; (B) make such reports; (C)
install, use, and maintain such monitoring equipment, and use such audit
procedures, or methods; (D) sample such emissions (in accordance with
such procedures or methods, at such locations, at such intervals, during
such periods, and in such manner as the Administrator shall prescribe);
(E) keep records on control equipment parameters, production variables
or other indirect data when direct monitoring of emissions is
impractical; (F) submit compliance certifications in accordance with
Section 114(a)(3); and (G) provide such other information as the
Administrator may reasonably require.

In the Administrator's judgment, HAP emissions from facilities in
semiconductor manufacturing cause or contribute to air pollution that
may reasonably be anticipated to endanger public health or welfare. 
Therefore, the NESHAP were promulgated for the source category at 40 CFR
part 63, subpart BBBBB.

	2(b)  Practical Utility/Users of the Data

	The recordkeeping and reporting requirements in the standard ensure
compliance with the applicable regulations which were promulgated in
accordance with the Clean Air Act.  The collected information is also
used for targeting inspections and as evidence in legal proceedings.

Performance tests are required in order to determine an affected
facility’s initial capability to comply with the emission standard. 
Continuous emission monitors are used to ensure compliance with the
standard at all times.  During the performance test, a record of the
operating parameters under which compliance was achieved may be recorded
and used to determine compliance in place of a continuous emission
monitor.

	The notifications required in the standard are used to inform the
Agency or delegated authority when a source becomes subject to the
requirements of the regulations.  The reviewing authority may then
inspect the source to check if the pollution control devices are
properly installed and operated, that leaks are being detected and
repaired, and that the standards are being met.  The performance test
may also be observed.

	The required semiannual reports are used to determine periods of excess
emissions, identify problems at the facility, verify
operation/maintenance procedures and for compliance determinations.

3.  Nonduplication, Consultations, and Other Collection Criteria

	The requested recordkeeping and reporting are required under 40 CFR
part 63, subpart BBBBB.

	3(a)  Nonduplication

	If the subject standards have not been delegated, the information is
sent directly to the appropriate EPA regional office.  Otherwise, the
information is sent directly to the delegated state or local agency.  If
a state or local agency has adopted its own similar standards to
implement the federal standards, a copy of the report submitted to the
state or local agency can be sent to the Administrator in lieu of the
report required by the federal standards.  Therefore, no duplication
exists.

	3(b)  Public Notice Required Prior to ICR Submission to OMB

	An announcement of a public comment period for the renewal of this ICR
was published in the Federal Register (70 FR 55368) on September 20,
2005.  No comments were received on the burden published in the Federal
Register.

	3(c)  Consultations

	Consultation with an industry representative (i.e., respondent) was
conducted to determine if there is anyway for EPA to reduce the
recordkeeping and reporting burden or improve the language in the
standard to make it easier to comply.  Our contact was Mr. Douglas
Andrey, from Semiconductor Industry Association (SIA), at (408)
573-6608.

	We also referenced the most recent ICR, consulted with the preparer of
the active ICR, and used other resources to obtain the most recent data
available.  We reviewed information available from the United States
Census Bureau, the AIRS Facility Subsystem (AFS), which is the primary
source of information regarding the number of existing sources, and
websites covering semiconductor manufacturing.  We also consulted with
EPA's Office of Air Quality Planning and Standards, Information Transfer
and Program Integration Division.

3(d)  Effects of Less Frequent Collection

	Less frequent information collection would decrease the margin of
assurance that facilities are continuing to meet the standards. 
Requirements for information gathering and recordkeeping are useful
techniques to ensure that good operation and maintenance practices are
applied and that emission limitations are met.  If the information
required by these standards was collected less frequently, the
likelihood of detecting poor operation and maintenance of control
equipment and noncompliance would decrease.

	3(e)  General Guidelines

	None of these reporting or recordkeeping requirements violate any of
the regulations established by OMB at 5 CFR part 1320, section 1320.5.

	These standards require the respondents to maintain all records,
including reports and notifications for at least five years.  This is
consistent with the General Provisions as applied to the standards.  EPA
believes that the five-year records retention requirement is consistent
with the Part 70 permit program and the five-year statute of limitations
on which the permit program is based.  Also, the retention of records
for five years would allow EPA to establish the compliance history of a
source and any pattern of compliance for purposes of determining the
appropriate level of enforcement action.  Historically, EPA has found
that the most flagrant violators frequently have violations extending
beyond the five years.  If records were retained for less than five
years, EPA would be prevented from pursuing the worst violators due to
the destruction or nonexistence of records.

	3(f)  Confidentiality

	Any information submitted to the Agency for which a claim of
confidentiality is made will be safeguarded according to the Agency
policies set forth in Title 40, Chapter 1, Part 2, Subpart B -
Confidentiality of Business Information (CBI) (see 40 CFR 2; 41 FR
36902, September 1, 1976; amended by 43 FR 40000, September 8, 1978; 43
FR 42251, September 20, 1978; 44 FR 17674, March 23, 1979).

	3(g)  Sensitive Questions

	None of the reporting or recordkeeping requirements contain sensitive
questions.

4.  The Respondents and the Information Requested

	4(a)  Respondents/SIC Codes

The respondents to the recordkeeping and reporting requirements are
semiconductor manufacturing.  The United States Standard Industrial
Classification (SIC) code for the respondent affected by the standards
is 3674, which corresponds to the North American Industry Classification
System (NAICS) code 334413 for semiconductor manufacturing.

	4(b)  Information Requested

	None of these reporting or recordkeeping requirements violate any of
the regulations established by OMB at 5 CFR part 1320, section 1320.5.

		(i)  Data Items

All data in this ICR that are recorded and/or reported are required by
NESHAP for Semiconductor Manufacturing (40 CFR part 63, subpart BBBBB).

	A source must make the following reports:

Notifications	Standard Citation by Sections

Initial notification	63.9(b)(2)-(3), and 63.7189(b)-(c)

Notification of performance test	63.7(b)-(c), 63.9(e), and 63.7189(d)

Notification of compliance status	63.9(h), 63.10(d)(2), and 63.7189(e)

Performance evaluation reports	63.8(e)(5), and 63.7191(a)(3)

Startup, shutdown, malfunction	63.6(e)(3), and 63.7190(a)(2)

Semiannual summary report	63.7190



	A source must make the following reports:

Recordkeeping 

Initial notification or notification of compliance status
63.10(b)(2)(xiv), and 63.7191(a)(1)

Record of startup, shutdown, and malfunctions	63.6(e)(3), and
63.7191(a)(2)

Records of performance tests and performance evaluations
63.10(b)(2)(viii), and 63.7191(a)(3)

Records are required to be retained for five years	63.10(b)(1)



Electronic Reporting

	At the present, respondents are using monitoring equipment that
automatically records parameter data.  Although personnel at the
affected facility must evaluate the data, this internal automation has
significantly reduced the burden associated with monitoring and
recordkeeping at the plant site.

	Also, regulatory agencies in cooperation with the respondents continue
to create reporting systems to transmit data electronically.  However,
electronic reporting systems are still not widely used.  At this time,
it is estimated that approximately 10 percent of the responses are done
electronically.

		(ii)  Respondent Activities

Respondent Activities

Read instructions.

Perform initial performance test, Reference Methods 320, 26, 26A test,
and repeat performance tests if necessary.

Write the notifications and reports listed above.

Enter information required to be recorded above.

Submit the required reports developing, acquiring, installing, and
utilizing technology and systems for the purpose of collecting,
validating, and verifying information.

Develop, acquire, install, and utilize technology and systems for the
purpose of processing and maintaining information.

Develop, acquire, install, and utilize technology and systems for the
purpose of disclosing and providing information.

Train personnel to be able to respond to a collection of information.

Transmit, or otherwise disclose the information.



	Currently, sources are using automated monitoring equipment that
provides parameter data.  Although personnel at the sources still need
to evaluate the data, this type of monitoring equipment has
significantly reduced the burden associated with monitoring and
recordkeeping.

5.  The Information Collected: Agency Activities, Collection
Methodology, and Information Management

	5(a)  Agency Activities

	EPA conducts the following activities in connection with the
acquisition, analysis, storage, and distribution of the required
information.

Agency Activities

Observe initial performance tests and repeat performance tests if
necessary.

Review notifications and reports, including performance test reports,
and excess emissions reports, required to be submitted by industry.

Audit facility records.

Input, analyze, and maintain data in the AIRS Facility Subsystem (AFS).



	

5(b)  Collection Methodology and Management

	Following notification of startup, the reviewing authority might
inspect the source to determine whether the pollution control devices
are properly installed and operated.  Performance test reports are used
by the Agency to discern a source’s initial capability to comply with
the emission standard.  Data and records maintained by the respondents
are tabulated and published for use in compliance and enforcement
programs.

	Information contained in the reports is entered into the AFS which is
operated and maintained by EPA's Office of Compliance.  AFS is EPA’s
database for the collection, maintenance, and retrieval of compliance
data for approximately 125,000 industrial and government-owned
facilities.  EPA uses the AFS for tracking air pollution compliance and
enforcement by local and state regulatory agencies, EPA regional offices
and EPA headquarters.  EPA and its delegated Authorities can edit,
store, retrieve and analyze the data.

	The records required by this regulation must be retained by the
owner/operator for five years.

	5(c)  Small Entity Flexibility

	A majority of the respondents are large entities (i.e., large
businesses).  However, the impact on small entities (i.e., small
businesses) was taken into consideration during the development of the
regulation.  Due to technical considerations involving the process
operations and the types of control equipment employed, the
recordkeeping and reporting requirements are the same for both small and
large entities.  The Agency considers these requirements the minimum
needed to ensure compliance and, therefore, cannot reduce them further
for small entities.  To the extent that larger businesses can use
economies of scale to reduce their burden, the overall burden will be
reduced.

	5(d)  Collection Schedule

The specific frequency for each information collection activity within
this request is shown in Table 1: Annual Industry Burden for NESHAP for
Semiconductor Manufacturing (40 CFR part 63, subpart BBBBB).

6.  Estimating the Burden and Cost of the Collection

	Table 1 documents the computation of individual burdens for the
recordkeeping and reporting requirements applicable to the industry for
the subpart included in this ICR.  The individual burdens are expressed
under standardized headings believed to be consistent with the concept
of burden under the Paperwork Reduction Act.  Where appropriate,
specific tasks and major assumptions have been identified.  Responses to
this information collection are mandatory.  The Agency may not conduct
or sponsor, and a person is not required to respond to, a collection of
information unless it displays a currently valid OMB Control Number.

	6(a)  Estimating Respondent Burden

	The average annual burden to industry over the next three years from
these recordkeeping and reporting requirements is estimated to be 37
(Total Labor Hours from Table 1).  These hours are based on Agency
studies and background documents from the development of this
regulation, Agency knowledge and experience with the NESHAP program, the
previously approved ICR, and any comments received.

	6(b)  Estimating Respondent Costs

		(i)  Estimating Labor Costs 

 

	This ICR uses the following labor rates: 

		Managerial	$100.99 ($48.09 + 110%)

		Technical	$87.97   ($41.89 + 110%)

		Clerical	$43.81   ($20.86 + 110%)

	These rates are from the United States Department of Labor, Bureau of
Labor Statistics, March 19, 2005, “Table 2. Civilian Workers, by
occupational and industry group.”  The rates are from column 1,
“Total compensation.”  The rates have been increased by 110 percent
to account for the benefit packages available to those employed by
private industry.

		(ii)  Estimating Capital/Startup and Operation and Maintenance Costs

	The type of industry costs associated with the information collection
activities in the subject standard are labor costs which are addressed
elsewhere in this ICR and the costs associated with continuous
monitoring.  The capital/startup costs are one time costs when a
facility becomes subject to the regulation.  The annual operation and
maintenance costs are the ongoing costs to maintain the monitor and
other costs such as photocopying and postage.

(iii)  Capital/Startup vs. Operation and Maintenance (O&M) Costs

Capital/Startup vs. Operation and Maintenance (O&M) Costs

(A)

Continuous Monitoring Device	(B)

Capital/Startup Cost for One Respondent	(C)

Number of New Respondents 	(D)

Total Capital/Startup Cost,

(B X C)	(E)

Annual O&M Costs for One Respondent	(F)

Number of Respondents with O&M	(G)

Total O&M,

(E X F)

N/A	N/A	N/A	N/A	$50.00	1	$50.00



The total capital/startup costs for this ICR are zero.  This is the
total of column D in the above table.  These costs are shown on the OMB
83-I form in block 14(a), Total annualized capital/startup costs.

The total operation and maintenance (O&M) costs for this ICR are $50.00.
 This is the total of column G.  These costs are shown on the OMB 83-I
form in block 14(b), Total annual costs (O&M).

The total respondent costs in block 14 have been calculated as the
addition of the capital/startup costs, and the annual operation and
maintenance costs.  The average annual cost for capital/startup and
operation and maintenance costs to industry over the next three years of
the ICR is estimated to be $50.  This cost will not be shown on the OMB
83-I form in block 14(c), Total annualized cost requested.  It is too
minuscule a total to be used, since block 14 of the OMB 83-I form are
rounded to show the cost in thousands of dollars.

	6(c)  Estimating Agency Burden and Cost

	The only costs to the Agency are those costs associated with analysis
of the reported information.  EPA's overall compliance and enforcement
program includes activities such as the examination of records
maintained by the respondents, periodic inspection of sources of
emission, and the publication and distribution of collected information.

	The average annual Agency cost during the three years of the ICR is
estimated to be $1,428.  This cost is based on the average hourly labor
rate as follows:

		Managerial	$57.20   (GS-13, Step 5, $35.75 x 1.6)

		Technical	$42.45   (GS-12, Step 1, $26.53 x 1.6)

		Clerical	$22.96   (GS-6, Step 3, $14.35 1.6)

These rates are from the Office of Personnel Management (OPM) “2006
General Schedule” which excludes locality rates of pay.  Details upon
which this estimate is based appear in Table 2: Average Annual EPA
Burden, NESHAP for Semiconductor Manufacturing (40 CFR part 63, subpart
BBBBB).

	6(d)  Estimating the Respondent Universe and Total Burden and Costs

	Based on our research for this ICR, on average over the next three
years, approximately one existing respondents will be subject to the
standard.  It is estimated that no additional respondent per year will
become subject.  The overall average number of respondents, as shown in
the table below is one per year.

	The number of respondents is calculated using the following table which
addresses the three years covered by this ICR.

Number of Respondents

	Respondents That Submit Reports	Respondents That Do Not Submit Any
Reports

	Year	(A)

Number of New Respondents	(B)

Number of Existing Respondents	(C)

Number of Existing Respondents That Keep Records but Do Not Submit
Reports	(D)

Number of Existing Respondents That Are Also New Respondents	(E)

Number of Respondents(E=A+B+C-D)

1	0	1	0	0	1

2	0	1	0	0	1

3	0	1	0	0	1

Average	0	1	0	0	1



	To avoid double-counting respondents, column D is subtracted.  As shown
above, the average Number of Respondents over the three-year period of
this ICR is one.  This number appears on the OMB 83-I form in block
13(a), Number of respondents.

 

	The total number of annual responses per year is calculated using the
following table: 

Total Annual Responses

(A)

Information Collection Activity	(B)

Number of Respondents	(C)

Number of Responses	(D)

Number of Existing Respondents That Keep Records But Do Not Submit
Reports	(E)

Total Annual Responses

E=(BxC)+D

Initial notification	0	1	0	0

Notification of performance evaluation	0	1	0	0

Notification of compliance status	0	1	0	0

Performance evaluation reports	0	1	0	0

Startup, shutdown/malfunction report	0	4	0	0

Semiannual summary report	1	2	0	2



	Total	2



	The number of Total Annual Responses is two.  This number is shown on
the OMB 83-I form in block 13(b), Total annual responses.

	6(e)  Bottom Line Burden Hours Burden and Cost Tables

	The detailed bottom line burden hours and cost calculations for the
respondents and the Agency are shown in Tables 1 and 2, respectively,
and summarized below.

		(i) Respondent Tally

The Total Hours Requested is shown on the OMB 83-I form in block 13(c). 
The total annual labor costs are $3,117.  The annual labor costs are not
shown on the OMB 83-I form.  Details regarding these estimates may be
found in Table 1. Annual Respondent Burden and Cost, NESHAP for, NESHAP
for Semiconductor Manufacturing (40 CFR Part 63, Subpart BBBBB). 
Furthermore, the annual public reporting and recordkeeping burden for
this collection of information is estimated to average 18 hours per
response.

	The total annual capital/startup and O&M costs to the regulated entity
are $50 (rounded).  This number is not shown on the OMB 83-I form in
block 14(c), Total annualized cost requested.  The cost calculations are
detailed in Section 6(b)(iii), Capital/Startup vs. Operation and
Maintenance (O&M) Costs.

		(ii) The Agency Tally

The average annual Agency burden and cost over the next three years is
estimated to be 34 labor hours at a cost of $1,428.  See Table 2. Annual
Agency Burden and Cost, NESHAP for Semiconductor Manufacturing (40 CFR
part 63, subpart BBBBB).

	6(f)  Reasons for Change in Burden

	The decrease in burden from the most recently approved ICR is due to
the requirements of the rule.  In the first year of the previous ICR,
the source category consisted of an estimated 127 facilities, which
included area sources, synthetic minor sources and major sources.  Of
these, only one facility is considered a major source subject to the
semiconductor manufacturing NESHAP, and the other 126 non-major sources
only read the rule for the first year.  There are no new sources
expected over the three years of this ICR.

	There are no changes in the capital/startup and operations and
maintenance (O&M) costs from the previous ICR, even though there is an
O&M cost for the one source, it is not enough for conversion to the
thousand dollar requirement.

	6(g)  Burden Statement

	The annual public reporting and recordkeeping burden for this
collection of information is estimated to average 18 hours per response.
 Burden means the total time, effort, or financial resources expended by
persons to generate, maintain, retain, or disclose or provide
information to or for a Federal agency.  This includes the time needed
to review instructions; develop, acquire, install, and utilize
technology and systems for the purposes of collecting, validating, and
verifying information, processing and maintaining information, and
disclosing and providing information; adjust the existing ways to comply
with any previously applicable instructions and requirements; train
personnel to be able to respond to a collection of information; search
data sources; complete and review the collection of information; and
transmit or otherwise disclose the information.

An agency may not conduct or sponsor, and a person is not required to
respond to, a collection of information unless it displays a valid OMB
Control Number.  The OMB Control Numbers for EPA’s regulations are
listed at 40 CFR part 9 and 48 CFR chapter 15.

To comment on the Agency's need for this information, the accuracy of
the provided burden estimates, and any suggested methods for minimizing
respondent burden, including the use of automated collection techniques,
EPA has established a public docket for this ICR under Docket ID Number
OECA-2005-0069, which is available for public viewing at the Enforcement
and Compliance Docket and Information Center in the EPA Docket Center
(EPA/DC), EPA West, Room B102, 1301 Constitution Avenue, N.W.,
Washington, D.C.  The EPA Docket Center Public Reading Room is open from
8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays.
 The telephone number for the Reading Room is (202) 566-1744, and the
telephone number for the Enforcement and Compliance Docket and
Information Center is (202) 566-1752.  An electronic version of the
public docket is available through Federal Docket Management System
(FDMS) at http://www.regulations.gov.  Use FDMS to submit or view public
comments, access the index listing of the contents of the public docket,
and to access those documents in the public docket that are available
electronically.  When in the system, select “search,” then key in
the Docket ID Number identified above.  Also, you can send comments to
the Office of Information and Regulatory Affairs, Office of Management
and Budget, 725 17th Street, N.W., Washington, D.C. 20503, Attention:
Desk Officer for EPA.  Please include the EPA Docket ID Number
EPA-HQ-OECA-2005-0069 and OMB Control Number 2060-0519 in any
correspondence.

Part B of the Supporting Statement

	This part is not applicable because no statistical methods were used in
collecting this information.



Table 1:  Annual Respondent Burden and Cost – NESHAP for Semiconductor
Manufacturing (40 CFR part 63, subpart BBBBB) 

Burden item	

(A)

Person-

hours per

occurrence	

(B)

No.  of

occurrences

per respondent

per year	

(C)

Person-

hours per

respondent

per year

(C=AxB)	

(D)

Respondents

per year  a	

(E)

Technical

person-

hours per

year

(E=CxD)	

(F)

Management

person-hours

per year

(Ex0.05)	

(G)

Clerical

person-

hours per year

(Ex0.1)	

(H)

Cost, $  b

1.  Applications	N/A







	2.  Survey and Studies	N/A







	3.  Reporting Requirements









   A. Read instructions c	4	1	4	0	0	0	0	$0

   B. Process/Review information  d	4	2	8	1	8	0.4	0.8	$779.21

   C. Write reports









           Initial notification c	2	1	2	0	0	0	0	$0

           Notification of performance                       evaluation
c	2	1	2	0	0	0	0	$0

           Notification of compliance status c	2	1	2	0	0	0	0	$0

           Performance evaluation reports c	2	1	2	0	0	0	0	$0

           Startup, shutdown/malfunction                   (SSM) report
e	1	4	4	0	0	0	0	$0

           Semiannual summary report f	4	2	8	1	8	0.4	0.8	$779.21

4.  Recordkeeping requirements









   A. Read instructions 	4	1	4	0	0	0	0	$0

   B. Plan activities	8	1	8	1	8	0.4	0.8	$779.21

   C. Implement activities 









       Control devices







 

           Design analysis	15	1	15	0	0	0	0	$0

           Performance evaluation	40	1	40	0	0	0	0	$0

           Equipment inspection	1	52	52	0	0	0	0	$0

           Monitoring activities	1	52	52	0	0	0	0	$0

           Maintenance	2	52	104	0	0	0	0	$0

   D. Develop record system









           Develop startup, shutdown,                        malfunction
plan	8	1	8	0	0	0	0	$0

           Control equipment/maintenance                 plan	12	1	12	0
0	0	0	$0

   E. Time to enter information 









           Control equipment testing	1	1	1	0	0	0	0	$0

           Control equipment inspection	0.5	52	26	0	0	0	0	$0

           Control equipment monitoring	0.5	52	26	0	0	0	0	$0

   F. Time to train personnel









           Acquisition, installation and use                 of
technology and systems	40	1	40	0	0	0	0	$0

           Control equipment inspection and              monitoring	40	1
40	0	0	0	0	$0

  G.  Store, file and maintain records  g	2	2	4	1	4	0.2	0.4	$389.60

  H.  Retrieve records/reports	2	2	4	1	4	0.2	0.4	$389.60

Subtotals Labor Burden and cost  



	32	1.6	3.2	$3,116.83

TOTAL LABOR BURDEN AND COST (rounded)	

	

	

	

	37	$3,117



Assumptions:

a  We have assumed that the average number of respondent that will be
subject to the rule will be one.  There will be no additional new source
that will become subject to the rule over the three-year period of this
ICR. 

b  This ICR uses the following labor rates: $100.99 per hour for
Executive, Administrative, and Managerial labor; $87.97 per hour for
Technical labor, and $43.81 per hour for Clerical labor.  These rates
are from the United States Department of Labor, Bureau of Labor
Statistics, March 19, 2005, (Table 2. Civilian Workers, by occupational

and industry group.(  The rates are from column 1, (Total compensation.(
 The rates have been increased by 110% to account for the benefit
packages available to those employed by private industry.

c  This is a one-time only activity.

d We have assumed that it will take 4 hours twice a year to process and
review information.

e  We have assumed that it will take one hour four times a year for
respondent to write reports.

f  We have assumed that each respondent will take four hours two times
per year to write semiannual summary reports.

g  We have assumed that it will take respondent two hours twice a year
to store, file and maintain records.

Table 2:  Average Annual EPA Burden - NSPS for Synthetic Fiber
Production Facilities (40 CFR part 60, subpart HHH) 

	Activity	

(A)

EPA person-

hours per

occurrence	

(B)

No. of

occurrences

per plant

 per year	

(C)

EPA person

hours per

plant  per year

(C=AxB)	

(D)

Plants per year  a	

(E)

Technical

person-hours

per year

(E=CxD)	

(F)

Management

person-hours

per year

(Ex0.05)

	

(G)

Clerical

person-

hours per year

(Ex0.1)	

(H)

Cost, $ b

Review initial notification reports	8	1	8	0	0	0	0	$0

Review notification of compliance status	10	1	10	0	0	0	0	$0

Review semiannual summary reports c	15	2	30	1	30	1.5	3	$1,428.18

Review notifications of performance tests	4	1	4	0	0	0	0	$0

Attend initial performance tests d	120	1	120	0	0	0	0	$0

Review test results e 	10	1	10	0	0	0	0	$0

Subtotals Labor Burden and cost



	30	1.5	3	$1,428.18

 TOTAL ANNUAL BURDEN AND     COST (rounded)	

	

	

	

	34	$1,428



Assumptions:

    a  We have assumed that the average number of respondents that will
be subject to the rule will be one.  There will be no additional new
source that will become subject to      the rule over the three-year
period of this ICR. 

b  This cost is based on the following labor rates which incorporates a
1.6 benefits multiplication factor to account for government overhead
expenses:  Managerial rate of $57.20 (GS-13, Step 5, $35.75 x 1.6),
Technical rate of $42.45 (GS-12, Step 1, $26.53 x 1.6), and Clerical
rate of $22.96 (GS-6, Step 3, $14.35 x 1.6).  These rates are from the
Office of Personnel Management (OPM) (2005 General Schedule( which
excludes locality rates of pay.

    c  We have assumed that each respondent will take four hours two
times per year to write semiannual summary reports.

    d  We have assumed that it will take 120 hours to complete an
initial performance tests.

    e  It will take 10 hours to review test results.

 PAGE   12 

 PAGE   11 

