                                       
   Instructions for STR0500: Independent Surveyor Annual Reporting for Fuels
                                       

Who must report 

 Any independent surveyor must report on test results for gasoline and diesel during the averaging period. 


Reporting requirements 

          40 CFR 1090 subpart J provides key requirements and reporting information (available at https://www.ecfr.gov/current/title-40/chapter-I/subchapter-U/part-1090/subpart-J/section-1090.925). 
          Annual reports must include the requirements described in 40 CFR 1090.925(c). These requirements include: 
                Identification of the parties that participated in the survey 
                      Company name 
                      EPA assigned registration number 
                      Year of participation 
                Provide a summary report for each geographic area (strata) type as well as a nationally  
                      Densely Populated Area 
                      Transportation Corridor 
                      Rural area 
                      Rural 
                      National  
                       
                Summary statistics for each identified geographic area type as well as nationally 
                      Number of samples collected and tested 
                      Mean for each gasoline/diesel parameter 
                      Median for each gasoline/diesel parameter 
                      Range for each gasoline/diesel parameter 
                      Standard deviation for each measured gasoline/diesel parameter 
                      Each summary statistic to be expressed in appropriate units 
                The estimated compliance rate for each measured gasoline and diesel parameter 
                      Sulfur Standards 
                            Gasoline sulfur  -  number of results above 95 ppm 
                            ULSD diesel sulfur  -  number of results above 15 ppm 
                      RVP Standards 
                            Federal 9.0 psi maximum RVP  -  number of results above 9.0 psi for any gasoline designated as summer gasoline or located at any location in the United States during the summer season 
                            Federal 7.8 psi maximum RVP  -  number of results above 7.8 psi for any gasoline designated as 7.8 psi summer gasoline or located in any of the areas described in §1090.215. 
                            RFG maximum RVP per-gallon standard  -  number of results above 7.4 psi for any gasoline designated as Summer RFG or located in RFG areas specified in §1090.270. 
                      Cetane index 
                            ULSD diesel  -  number of results with cetane index less than 40 
                      Aromatic index 
                            ULSD diesel  -  number of results with aromatic content greater than 35 volume percent 

Reporting deadlines 

 Entities shall report on all batches produced or imported by March 31st each year for the prior calendar year compliance period.

How to submit reports

 All reporting, including on all of the elements described above, must be submitted electronically, using forms and procedures specified by EPA. 
 
 EPA maintains report templates, electronic submission procedures and additional support options at https://www.epa.gov/fuels-registration-reporting-and-compliance-help/reporting-fuelprograms. 


Field Instructions
Field No.
Field Name
Units
Field Formats, Codes & Special Instructions
1  
Report Form ID  
  
AAAAAA; Character.  
Enter STR0500  

2  
Report Type  
  
A; Character. Specify if the data submitted in this report is original or if it is being resubmitted. Submit only one original report; any corrections or updates should be marked as a resubmission.  

     O = Original  
     R = Resubmission  

3  
CBI  
  
A; Character. Specify if the data contained within the report is claimed as Confidential Business Information (CBI) under 40 CFR Part 2, subpart B:
  
     Y = Confidential Business Information  
     N = Non-Confidential Business Information  

4  
Report Date  
  
MM/DD/YYYY; Character. Enter the date the original or resubmitted report is created.  

5  
Compliance Period  
  
YYYY; Character. Enter the participation year the report covers.  

6  
Reporter ID  
  
AAAA; Character. Enter the EPA-assigned four-character ID of the independent surveyor submitting the report.  

7  
Geographic Area 
  
AAA; Character.  Enter the geographic area (strata) code associated with this sample location per the approved sample plan.  
     DPA  -  Densely Populated Area  
     TCR  -  Transportation Corridor  
     RRL  -  Rural Area 
     NAT  -  National   
AAAAA; Character.  Enter the strata code for this summary report. 
     DPA  -  Densely populated areas 
     TCR  -  Transportation corridors 
     RRL  -  Rural areas 
     NAT  -  National 
 
8  
Fuel Type  
  
AAAAAA; Character. Enter the code representing the fuel type reported 
      GAS  -  Gasoline  
      DSL  -  Diesel fuel  
9  
Samples Collected and Tested 
  
9,999; Number. Enter the number of samples collected and tested in the geographic area during the participation year. 
 
10  
Sulfur Compliance  
  
9,999; Number. Enter the number of results above the applicable fuel type sulfur standard: 
     95 ppm for gasoline 
     15 ppm for diesel 

11  
RVP 9.0 Compliance 
 
9,999; Number. Enter the number of results above 9.0 psi for any gasoline designated as summer gasoline or located at any location in the US during summer season. 
Use "NA" if this field is not applicable. 

12  
RVP 7.8 Compliance 
 
9,999; Number. Enter the number of results above 7.8 psi for any gasoline designated as 7.8 psi summer gasoline or located in any of the areas described in 1090.215. 
Use "NA" if this field is not applicable. 

13  
RVP RFG Max 
 
9,999; Number. Enter the number of results above 7.4 psi for any gasoline designated as summer RFG or located in RFG areas specified in 1090.270. 
Use "NA" if this field is not applicable. 

14  
Sulfur Mean  
ppm  
9999; Number.  Calculate and enter the mean value of sulfur for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

15  
Sulfur Median  
 ppm 
9999; Number.  Calculate and enter the median value of sulfur for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

16  
Sulfur Range  
 ppm 
9999 to 9999; Character.  Enter the minimum and maximum sulfur values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8 to 15" 

17  
Sulfur Std. Deviation  
ppm 
9999; Number.  Calculate and enter the standard deviation of sulfur for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

18  
Oxy ETOH Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of ethanol for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

19  
Oxy ETOH Median 
volume % 
999.99; Number.  Calculate and enter the median value of ethanol for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

20  
Oxy ETOH Range  
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum ethanol values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

21  
Oxy ETOH Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of ethanol for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

22  
Oxy MTBE Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of MTBE (methyl tert-butyl ether) for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

23  
Oxy MTBE Median 
volume % 
999.99; Number.  Calculate and enter the median value of MTBE (methyl tert-butyl ether) for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

24 
Oxy MTBE Range  
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum MTBE (methyl tert-butyl ether) values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

25 
Oxy MTBE Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of MTBE (methyl tert-butyl ether) for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

26 
Oxy ETBE Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of ETBE (ethyl tert-butyl ether) for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

27 
Oxy ETBE Median 
volume % 
999.99; Number.  Calculate and enter the median value of ETBE (ethyl tert-butyl ether) for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

28 
Oxy ETBE Range  
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum ETBE (ethyl tert-butyl ether) values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

29 
Oxy ETBE Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of ETBE (ethyl tert-butyl ether) for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

30 
Oxy ISOB Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of sulfur for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

31 
Oxy ISOB Median 
volume % 
999.99; Number.  Calculate and enter the median value of Isobutanol for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

32 
Oxy ISOB Range  
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum Isobutanol values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

33 
Oxy ISOB Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of Isobutanol for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

34 
Oxy TAME Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of Isobutanol for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

35 
Oxy TAME Median 
volume % 
999.99; Number.  Calculate and enter the median value of TAME (tert-Amyl methyl ether) for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

36 
Oxy TAME Range  
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum TAME (tert-Amyl methyl ether) values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

37 
Oxy TAME Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of TAME (tert-Amyl methyl ether) for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

38 
Oxy MTHL Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of methanol for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

39 
Oxy MTHL Median 
volume % 
999.99; Number.  Calculate and enter the median value of methanol for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

40 
Oxy MTHL Range  
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum methanol values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

41 
Oxy MTHL Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of methanol for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

42 
Oxy TBUT Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of tert-Butanol for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

43 
Oxy TBUT Median 
volume % 
999.99; Number.  Calculate and enter the median value of tert-Butanol for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

44 
Oxy TBUT Range  
volume % 
999.99 to 999,99; Character.  Enter the minimum and maximum tert-Butanol values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

45 
Oxy TBUT Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of tert-Butanol for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

46 
Oxy UNKN Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of unknown oxygenate for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

47 
Oxy UNKN Median 
volume % 
999.99; Number.  Calculate and enter the median value of unknown oxygenate for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

48 
Oxy UNKN Range  
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum unknown oxygenate values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

49 
Oxy UNKN Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of unknown oxygenate for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

50 
Oxy OTHR Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of other oxygenate for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

51 
Oxy OTHR Median 
volume % 
999.99; Number.  Calculate and enter the median value of other oxygenate for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

52  
Oxy OTHR Range  
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum other oxygenate values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

53 
Oxy OTHR Std. Deviation  
volume % 
999.99; Number.  Calculate and enter the standard deviation of other oxygenate for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.
  
54 
Benzene Mean  
volume % 
999.99; Number.  Calculate and enter the mean value of benzene for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

55 
Benzene Median 
volume % 
999.99; Number.  Calculate and enter the median value of benzene for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

56 
Benzene Range 
volume % 
999.99 to 999.99; Character.  Enter the minimum and maximum benzene values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

57 
Benzene Std. Deviation 
volume % 
999.99; Number.  Calculate and enter the standard deviation of benzene for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

58 
RVP Mean  
Psi 
999.99; Number.  Calculate and enter the mean value of RVP (Reid vapor pressure) for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

59 
RVP Median 
Psi 
999.99; Number.  Calculate and enter the median value of RVP (Reid vapor pressure) for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

60 
RVP Range 
Psi 
999.99 to 999.99; Character.  Enter the minimum and maximum RVP (Reid vapor pressure) values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

61 
RVP Std. Deviation 
Psi 
999.99; Number.  Calculate and enter the standard deviation of RVP (Reid vapor pressure) for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

62 
API Spec. Gravity Mean  
ᵒ API 
999.99; Number.  Calculate and enter the mean value of API specific gravity for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

63 
API Spec. Gravity Median 
ᵒ API 
999.99; Number.  Calculate and enter the median value of API specific gravity for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

64 
API Spec. Gravity Range 
ᵒ API 
999.99 to 999.99; Character.  Enter the minimum and maximum API specific gravity values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.01 to 15.12" 

65 
API Spec. Gravity Std. Deviation 
ᵒ API 
999.99; Number.  Calculate and enter the standard deviation of API specific gravity for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

66 
Aromatics Mean  
volume % 
999.9; Number.  Calculate and enter the mean value of aromatics for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

67 
Aromatics Median 
volume % 
999.9; Number.  Calculate and enter the median value of aromatics for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

68 
Aromatics Range 
volume % 
999.9 to 999.9; Character.  Enter the minimum and maximum aromatics values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.0 to 15.1" 

69 
Aromatics Std. Deviation 
volume % 
999.9; Number.  Calculate and enter the standard deviation of aromatics for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

70 
Olefins Mean  
volume % 
999.9; Number.  Calculate and enter the mean value of olefins for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

71 
Olefins Median 
volume % 
999.9; Number.  Calculate and enter the median value of olefins for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

72 
Olefins Range 
volume % 
999.9 to 999.9; Character.  Enter the minimum and maximum olefins values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.0 to 15.1" 

73 
Olefins Std. Deviation 
volume % 
999.9; Number.  Calculate and enter the standard deviation of olefins for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value. 
 
74 
E200 Mean  
volume % 
999.9; Number.  Calculate and enter the mean value of E200 for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

75 
E200 Median 
volume % 
999.9; Number.  Calculate and enter the median value of E200 for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

75 
E200 Range 
volume % 
999.9 to 999.9; Character.  Enter the minimum and maximum E200 values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.0 to 15.1" 

77 
E200 Std. Deviation 
volume % 
999.9; Number.  Calculate and enter the standard deviation of E200 for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

78 
E300 Mean  
volume % 
999.9; Number.  Calculate and enter the mean value of E300 for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

79 
E300 Median 
volume % 
999.9; Number.  Calculate and enter the median value of E300 for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

80 
E300 Range 
volume % 
999..9 to 999.9; Character.  Enter the minimum and maximum E300 values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.0 to 15.1" 

81 
E300 Std. Deviation 
volume % 
999.9; Number.  Calculate and enter the standard deviation of E300 for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

82 
T50 Mean  
℉ 
999.9; Number.  Calculate and enter the mean value of T50 for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

83 
T50 Median 
℉ 
999.9; Number.  Calculate and enter the median value of T50 for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

84 
T50 Range 
℉ 
999.9 to 999.9; Character.  Enter the minimum and maximum T50 values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.0 to 15.1" 

85 
T50 Std. Deviation 
℉ 
999.9; Number.  Calculate and enter the standard deviation of T50 for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

86 
T90 Mean  
℉ 
999.9; Number.  Calculate and enter the mean value of T90 for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

87 
T90 Median 
℉ 
999.9; Number.  Calculate and enter the median value of T90 for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

88 
T90 Range 
℉ 
999.9 to 999.9; Character.  Enter the minimum and maximum T90 values as a range for the compliance period.  Use "NA" if this field is not applicable; use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  
For example, "8.0 to 15.1" 

89 
T90 Std. Deviation 
℉ 
999.9; Number.  Calculate and enter the standard deviation of T90 for the compliance period.  Use "NA" if this field is not applicable (e.g. for diesel samples); use "ND" if "not detected" by the reported test method.  Note entering a zero implies testing resulted in 0 value.  

90 
Comments  
N/A  
AAAAA  -  Text.  Enter any additional information or recordkeeping specific to this sample as needed. 
 


                                       
                       Paperwork Reduction Act Statement
                                       

This collection of information is approved by OMB under the Paperwork Reduction Act, 44 U.S.C. 3501 et seq. (OMB Control No. 2060-XXXX). Responses to this collection of information are mandatory (40 CFR part 1090). An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The public reporting and recordkeeping burden for this collection of information is estimated to range from five to 10 hours per response. Send comments on the Agency's need for this information, the accuracy of the provided burden estimates and any suggested methods for minimizing respondent burden to the Regulatory Support Division Director, U.S. Environmental Protection Agency (2821T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number in any correspondence. Do not send the completed form to this address. 


