From: Mary-Jo Caldwell [mailto:mjcaldwell@nc.rr.com] 
Sent: Wednesday, April 25, 2018 7:45 AM
To: Yamazaki, Shingo (ECY) <syam461@ECY.WA.GOV>; Holbrook, Kelsey (ECY) <keho461@ecy.wa.gov>
Subject: RE: Subpart JJJJ Emissions Data - Nippon Longview

Shingo,
I would like to have the response by the end of today, if possible.  If that's not possible, as soon as you can get to it.  

Sorry for the demanding timeline.  Things were at a standstill and now they are on an accelerated timeline  -  why does it always work that way?

Thanks for your help.

Mary-Jo

From: Yamazaki, Shingo (ECY) [mailto:syam461@ECY.WA.GOV] 
Sent: Wednesday, April 25, 2018 10:25 AM
To: Mary-Jo Caldwell <mjcaldwell@nc.rr.com>; Holbrook, Kelsey (ECY) <keho461@ecy.wa.gov>
Subject: RE: Subpart JJJJ Emissions Data - Nippon Longview

Mary-Jo,

Do you have a timeline you need a response by?

Shingo

From: Mary-Jo Caldwell [mailto:mjcaldwell@nc.rr.com] 
Sent: Wednesday, April 25, 2018 6:43 AM
To: Yamazaki, Shingo (ECY) <syam461@ECY.WA.GOV>; Holbrook, Kelsey (ECY) <keho461@ecy.wa.gov>
Subject: RE: Subpart JJJJ Emissions Data - Nippon Longview

Shingo and Kelsey,

If available, I want speciated HAP emissions (annual and maximum allowable short-term) from the Nippon emission units that are subject to Subpart JJJJ (which I believe is the extruders).  If speciated HAP emissions are not available, total HAP emissions and an idea of which HAPs are present will be helpful.

In addition, because we will be modeling the HAP emissions for the residual risk analysis, I would also appreciate the emission release point parameters (stack height etc if a stack, fugitive height etc if a fugitive source).

Thank you.

Mary-Jo Caldwell
Caldwell Environmental, Inc.
6205 Winthrop Drive
Raleigh, NC 27612
919-812-5309

From: Yamazaki, Shingo (ECY) [mailto:syam461@ECY.WA.GOV] 
Sent: Tuesday, April 24, 2018 7:27 PM
To: Holbrook, Kelsey (ECY) <keho461@ecy.wa.gov>; mjcaldwell@nc.rr.com
Subject: RE: Subpart JJJJ Emissions Data - Nippon Longview

Ms. Caldwell,

For additional clarification, Nippon Dynawave performs stack tests to demonstrate compliance with a separate (non-HAP) related order. 

Nippon does not use a capture/control system and therefore doesn't have performance test data. We do have information regarding HAP content of coating materials used/applied.

Shingo

