








                                       

	Supporting Statement
	for
	Information Collection Request

            Importation of On-highway Vehicles and Motorcycles and 
                   Nonroad Engines, Vehicles, and Equipment


	EPA ICR Number 2583.03


	OMB Control Number: 2060-0717 











	February 2023

	Compliance Division
	Office of Transportation and Air Quality
	Office of Air and Radiation
	U.S. Environmental Protection Agency


1.   IDENTIFICATION OF THE INFORMATION COLLECTION

(a)  TITLE OF THE INFORMATION COLLECTION

Reporting and Recordkeeping Requirements for Importation of On-highway Vehicles and Motorcycles and Nonroad Engines, Vehicles and Equipment, OMB 2060-0717 EPA ICR 2583.03.

(b)  SHORT CHARACTERIZATION (ABSTRACT)

The Clean Air Act requires that on-highway vehicles and motorcycles, and nonroad vehicles, engines and equipment imported into the U.S. either comply with applicable emission requirements or qualify for an applicable exemption or exclusion. The Compliance Division (CD) in the Office of Air and Radiation maintains and makes available instruments to importers to help facilitate importation of products at U.S. borders. EPA Form 3520-1 is used by importers of on-highway vehicles and motorcycles, and EPA Form 3520-21 is used by importers of nonroad vehicles, engines, and equipment. 

For EPA Declaration Form 3520-1 and 3520-21, U.S. Customs and Border Protection (CBP) regulations at 19 CFR 12.73 and 12.74 require importers to file the requisite information directly with CBP at the time of entry, with the exception of motor vehicles or stationary, nonroad or heavy-duty highway engines (including engines incorporated into vehicles or equipment). Engines that are imported by the Original Equipment Manufacturer (OEM) and hold an EPA certificate of conformity are labeled accordingly. 

EPA makes both forms available on our website in fillable PDF format (http://www.epa.gov/importing-vehicles-and-engines/publications-and-forms-importing-vehicles-and-engines). EPA does not require that the forms be submitted directly to us.  Rather, these forms are used by CBP to facilitate the importation of products at U.S. borders. EPA requires that the forms be kept by importers for a period of five years after importation to assist EPA's Office of Enforcement and Compliance Assurance (OECA) and CBP in locating information should any issues arise with any given importation. 

Since 2016, CBP has been using the Automated Commercial Environment (ACE) to facilitate the electronic filing of imports documents rather than collecting paper. ACE has become the primary system through which the trade community and other importers report imports and exports. Through ACE, manual processes have been streamlined and automated, and paper submissions (e.g. fillable PDFs) have been significantly reduced. The information detailed on both EPA forms has been incorporated into ACE. Rather than file hard copy forms, importers will log into ACE and check boxes that correspond to information elements currently found on the forms. Filers using the ACE interface will also receive transaction information that will be kept by the filer. However, EPA will continue to maintain the forms on our website in fillable PDF format. Although importers are expected to use the ACE interface to submit information, the PDF versions of the form can also be submitted directly into ACE by importers. 

Information collected includes identification of the importer, the entry date, the manufacturer, the test group/engine family name, engine model and serial number, EPA exemption number if applicable, and bond information if applicable, and an indication of the regulatory category of vehicle, engine, or equipment of the relevant regulatory provision under which it is being imported. The information is submitted directly into ACE or can be submitted by filling in the applicable EPA declarations form and submitted to CBP at the time of importation. Importers must also make the information available to EPA upon request. The information is used to monitor compliance of imports with the law and regulations and to respond to inquiries from the public concerning the compliance status of specific imported engines.
      
EPA also makes available upon request EPA Form 3520-8 for use by independent commercial importers (ICIs) to request final admission (as opposed to initial declaration) of nonconforming vehicles. This only applies to light-duty vehicle importers who participate in the ICI program under 40 CFR Part 85, Subpart P. Because the ICI program is very small by nature, this form has not yet been incorporated into ACE as have forms 3520-1 and 3520-21 and will continue to be made available upon request as a fillable PDF form. 


2.  NEED FOR AND USE OF THE COLLECTION

(a)  NEED/AUTHORITY FOR THE COLLECTION

Joint EPA and CBP regulations at 40 CFR 90.601 et seq. and 19 CFR 12.73 and 12.74 promulgated under the authority under the Clean Air Act (Sections 203, 208 and 213) give authority for the collection of information. The collection of this information helps ensure the compliance of imported vehicles, engines, and equipment with Federal emissions requirements, which helps meet the Agency goal of reducing air pollution. Without this information, EPA and CBP could not confirm that vehicles, engines and equipment being imported conform to the emission requirements of the Act or are appropriately eligible for an exemption from meeting the emissions requirements of the Act.

(b)  PRACTICAL UTILITY/USERS OF THE DATA

While EPA does not collect the forms directly from importers, we may ask for them upon request to assist CPB and/or EPA enforcement personnel for any given import for which there are questions or issues. The forms are primarily used by CBP at the time of importation to assist CBP in making determination if entry should be allowed. This information may also be used by CBP or EPA's enforcement personnel to verify that all vehicles, engines and equipment subject to Federal emission requirements have been declared upon entry or that the category of exclusion or exemption from emissions requirements has been identified in the declaration. The information is also used to identify and prosecute violators of the regulations. EPA staff with the appropriate clearances also have access to the ACE system and can view the data directly in the system. 

3. NONDUPLICATION, CONSULTATIONS, AND OTHER COLLECTION CRITERIA

(a)  NONDUPLICATION

Because the information collected is specific to identifying the appropriate regulated category and appropriate regulatory provisions for imported vehicles, engines and equipment under the Clean Air Act, the information is uniquely specific to EPA. With the paper forms, it was not practical to combine the information contained on the forms with other programs or agencies. However, with the ACE system, importers will now be able file the information electronically directly with CBP.

(b)  PUBLIC NOTICE REQUIRED PRIOR TO ICR SUBMISSION TO OMB

EPA issued a Federal Register notice on October 5, 2022 (87 FR 60392) to solicit comments on this ICR.  No comments were received. 

(c)  CONSULTATIONS
                  
The following representatives and manufacturers of imported vehicles, engines, and equipment provided feedback on the current process. EPA has also used data collected from the ACE system to help refine previous burden estimates.

Zachary Dendler
BMW
Emission Certification & Compliance (EG-8-US-21)
200 Chestnut Ridge Road Bldg. 150
Woodcliff Lake, NJ 07677

Jennifer Kamarek
Compliance Specialist
Vandegrift Customs Brokerage
500 E. Main Street
Norfolk, VA  23510 

Shelly Tovatt
Harrison Wolf Consulting
17611 Metzler Lane
Huntington Beach, CA  92647


(d)  EFFECTS OF LESS FREQUENT COLLECTION

The forms are provided to CBP by the importer only when the products arrive at the port to assist CBP in facilitating entry of the products. Therefore, less frequent collection is not feasible. Note that one form or ACE entry per shipment may be used, provided attachments including all the information required to describe each vehicle or engine is included.  

(e)  GENERAL GUIDELINES
      
Forms 3520-1 and 3520-21, are only filed with CBP once at the time of entry. For form 3520-8, this ICR requires that ICIs notify EPA when requesting final admission for vehicles and this may occasionally result in reporting more often than quarterly if vehicles are tested and ready for sale more frequently than quarterly. This requirement is necessary for EPA to have the opportunity to inspect vehicles prior to release from the ICI. If EPA only required quarterly reports, either the ICI would have to hold vehicles and release them on a quarterly basis or EPA would not likely have the opportunity to inspect or require confirmatory testing of vehicles imported by the ICI.

(f)  CONFIDENTIALITY


Any information submitted to the Agency for which a claim of confidentiality is made will be safeguarded according to policies set forth in Title 40, Chapter 1, Part 2, Subpart B - Confidentiality of Business Information (see 40 CFR 2.201 et seq.). The public is not permitted access to information containing personal or organizational identifiers. 

(g) SENSITIVE QUESTIONS

 No sensitive questions are asked.

4. THE RESPONDENTS AND THE INFORMATION REQUESTED

(a)  RESPONDENTS/NAICS CODES

Information collected is from individual importers and both small and large companies who import or import and manufacture nonroad engines and recreational vehicles. The NAICS codes for the respondents are as follows:

Light-duty Vehicles
423110 	Automobile and Other Motor Vehicle Merchant Wholesalers
441200	Other Motor Vehicle Dealers. 

Non-road compression ignition engines
333618	Manufacturers of nonroad diesel engines
333111	Manufacturers of farm machinery and equipment
333112	Manufacturers of lawn and garden tractors (home)
333924	Manufacturers of industrial trucks
333120	Manufacturers of construction machinery
333131	Manufacturers of mining machinery and equipment
333132	Manufacturers of oil and gas field machinery and equipment
811112, 811198	Commercial importers of vehicles and vehicle components
33631		Manufacturers of motor vehicle gasoline engine and engine parts
336312	Manufacturers of gasoline engine and engine parts
33639		Manufacturers of other motor vehicle parts

Small nonroad spark-ignition engines
333618	Other engine equipment manufacturing
336312	Gasoline engine and engine parts manufacturing
336999	Other transportation equipment manufacturing
336911	Motorcycle, bicycle and parts manufacturing

Marine outboard and personal watercraft engines  
333618	Manufacturers of marine spark ignition engines
333112	Manufacturers of recreational marine vessels
336611	Ship building and repair
336612	Boat building
336999	Other marine outboard and personal watercraft manufacturing
441222	Motorcycle, boat, and other motor vehicle dealers


Locomotive engines
333618			Manufacturers of locomotives and locomotive engines
48211, 482111, 482112	Railroad owners and operators
488210			Engine repair and maintenance

Large marine compression-ignition engines

333618		Manufacturers of marine diesel engines
33661, 346611	Ship and boat building; ship building and repair
811310		Engine repair and maintenance
483			Water transportation, freight and passenger
336612	Boat building (watercraft not built in shipyards and typically of the type suitable or intended for personal use)
441222		Motorcycle, boat, and other motor vehicle dealers

Recreational vehicles, including snowmobiles, all-terrain vehicles, and certain high-speed utility vehicles
336991		Motorcycle manufacturers
336999		Snowmobile and all-terrain vehicle manufacturers
441222		Motorcycle, boat, and other motor vehicle dealers

Large nonroad spark-ignition engines
333618		Manufacturers of new nonroad spark-ignition engines
333111		Manufacturers of farm equipment
333112		Manufacturers of construction equipment
333924		Manufacturers of industrial trucks
811310		Engine repair and maintenance


(b)  INFORMATION REQUESTED

(i)  Data Items    

The data requested include:

     	- vehicle or engine identification number
     	- vehicle or engine make
     	- vehicle or engine model
    	- model year of the vehicle or engine
     	- port of entry

    	- date of entry
     	- entry number
    	- importer name, address and telephone number
     	- broker name, address and telephone number (optional)
    	- owner name, address and telephone number (optional) 
    	- identification of the type of vehicle or engine by regulatory category
     	- identification of the provision under which the vehicle or engine is being imported
    	-EPA exemption number, if applicable
	- Bond information, if applicable	
      
(ii) Respondent Activities

     To complete the collection, the respondent would:
      
      	-read form instructions
      	-collect data and complete forms

Information Requirements for Importation of Motor Vehicles and Motor Vehicle Engines 

INFORMATION REQUIREMENTS				CITATION

I. ICI requirements
- Reporting
- Application for final admission   				85.1505(a)
   (certified)
- Reasonable assistance during inspection, 			85.1506(c),(g)(4)
   including copies of records or documents 			85.1506(b)(2)
- Application for final admission   				85.1509(b)
   (modification/test)
- Repair and retest						85.1509(g)
- Maintenance instructions, attestation, 			85.1510(a)
   parts list
- Altitude compensator instructions, attestation 		85.1510(b)
- Emission warranties, attestation   				85.1510(c)
- Emission labeling, attestation   				85.1510(d)
- Fuel economy labeling, attestation 				85.1510(e)
- Gas guzzler tax forms, attestation 				85.1510(f)
- Reply to notice of suspension or  				85.1513(f)(3)(ii),
   revocation      						85.1513(f)(3)(iv)
   								85.1513(f)(6)
- Request for hearing    					85.1513(f)(3)(iii)

Recordkeeping
- Certification, modification, test, purchase, 			85.1507
   sale, storage, registration, importation     
- Owners or ultimate purchasers 				85.1508(b)
- Maintenance instructions, parts list, 			85.1510
   altitude compensator instructions, 
   emission warranties, emission labeling,
   fuel economy labeling

II. Requirements applying to all importers

- Notification of conditional admission 			85.1504(a)
- Request for prior approval (exemption), 			85.1511(b),(g)
   request for extension of exemption     
- Request for prior approval (exclusion)			85.1511(c)-(g)                                                         
- Attestations, copy of paid invoice 				85.1512(f)
- Claim of confidentiality    					85.1514


Information Requirements for Importation of All Nonroad Vehicles, Engines, and Equipment

INFORMATION REQUIREMENTS			     	CITATION

I. Requirements applying to all importers

General provisions						1068.301
Applying for Exemptions or Exclusions 			1068.305   
Available Exclusions						1068.310 
Permanent Exemptions					1068.315
Temporary Exemptions 					1068.325   
Penalties for Violations					1068.335   
Restrictions to Assigning a Model Year			1068.360


5. THE INFORMATION COLLECTED--AGENCY ACTIVITIES, COLLECTION METHODOLOGY, AND INFORMATION MANAGEMENT

(a)  AGENCY ACTIVITIES

The EPA Compliance Division does not collect the forms, but rather makes them available to importers and CBP to facilitate entry of goods at the port. The EPA's Compliance Division  and/or EPA's enforcement office may ask for them upon request to assist CBP and/EPA enforcement personnel for any given import for which there are questions or issues. The forms are primarily used by CBP at the time of importation to assist CBP in determining if entry should be allowed. 

(b)  COLLECTION METHODOLOGY AND MANAGEMENT

CBP and EPA use the information to facilitate entry at the port to assess if vehicles, engines, and equipment meet EPA requirements, or are eligible for an applicable exemption. EPA does not collect the forms from importers. As described above, CBP is moving toward the electronic collection of the data elements contained on the forms that will streamline the reporting and recordkeeping burdens. With the implementation of ACE, importers will receive a transaction number which they will be required to maintain so that the importation records can be retrieved from the ACE database if needed. 

(c)  SMALL ENTITY FLEXIBILITY

Small entities are required to submit the information covered by this ICR when applicable. There is no exemption for small entities. 

(d) COLLECTION SCHEDULE

The information is not subject to a collection schedule, but is collected at the time of entry and, in the event of an ICI import, when the vehicle is ready for approval by EPA of final admission.

6. ESTIMATING THE BURDEN AND COST OF THE COLLECTION

6(a) ESTIMATING RESPONDENT BURDEN (Hours)

Each form is estimated to take 0.5 hours to complete. Completing required post-certification testing for ICIs is estimated to take 23 hours per test to complete. EPA estimates .25 hours for recordkeeping requirements for each ICI.

6(b) ESTIMATING RESPONDENT COST

(i) Labor Costs

Rates for engineering managers, mechanical engineers, and secretaries (except legal, medical, and executive) are from the May 2021 BLS National Occupational Employment and Wage Estimates (http://www.bls.gov/oes/current/oes_nat.htm, accessed August 30, 2022). With a 2.1 overhead multiplier, these are $153.82, $100, and $60.10, respectively. 

(ii) Estimating Capital and Operations and Maintenance Costs 
      
Capital/start-up costs are predominantly incurred by ICIs during the required certification process, which is covered by other ICRs. ICIs in the on-road program typically obtain the necessary testing and certification work from a broker, who also provides testing services, or who obtains from a testing facility the test results necessary for the final importation form. 

(iii) Capital/Start-up vs. Operating and Maintenance Costs 

The only Operating and Maintenance (O&M) costs associated with this ICR are incurred by ICIs during the required certification process, which is covered by other ICRs. 
      
      
6(c) ESTIMATING AGENCY BURDEN AND COST

The imports program is administered by EPA's Compliance Division. Forty percent of one Full Time Equivalent employee (FTE), and a portion of the work assignment under a government contract are allocated to imports activities. Based on the 2022 Office of Personnel GS pay schedule for Detroit, EPA estimates a forty percent annual salary of $37, 260 for the EPA FTE. We then multiply the hourly rate by the standard government benefits multiplication factor of 1.6, for a cost of $59,616 for the EPA FTE, and $135,000 for the contractor. The previous ICR included an estimate for twenty percent of one Senior Environmental Employment (SEE) Program employee. As more entries are facilitated automatically by ACE, this has significantly reduced the amount of time needed by a SEE to assist with the program so that work has been incorporated into the contract mentioned above and has reduced the estimated agency burden by approximately $40,000.



6(d) ESTIMATING THE RESPONDENT UNIVERSE AND TOTAL BURDEN COSTS

Reporting, Recordkeeping, and Testing Burdens for Form 3520-8:			1,985 hrs
Reporting and Recordkeeping Burdens, Forms 3520-1 and 3520-21:		80,000 hrs
Total Hours										81,985 hrs


Recording, Recordkeeping, and Testing for Form 3520-8:				$ 196,549
Reporting and Recordkeeping Burdens, Forms 3520-1 and 3520-21:		$ 7,813,000
Total Cost										$ 8,009,549

6(e) BOTTOM LINE BURDEN HOURS AND COST TABLES

 Respondent Tally
            
The information collection estimates 14,810 respondents at an estimated labor cost of $8,009,549.
            
 The Agency Tally
            
The total EPA estimated burden is $194,616 and includes FTE and contractor dollars to support imports activities. 
            
6(f) REASONS FOR CHANGE IN BURDEN

In looking at data provided by ACE from October 1, 2021  -  September 27, 2022, the number of entries (forms filed with CBP) has increased from approximately 160,000 per year to approximately 260,000 per year.  Therefore, the total estimated cost has increased by approximately $3,764,850 compared with the ICR currently approved by OMB.  This is due to the increased number of forms filed and also a slight increase in labor costs. 

6(g) BURDEN STATEMENT

The annual public reporting and recordkeeping burden for this collection of information is estimated to average 45 minutes per response (30 minutes for reporting and 15 minutes for recordkeeping). Burden means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal agency. This includes the time needed to review instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting, validating, and verifying information, processing and maintaining information, and disclosing and providing information; adjust the existing ways to comply with any applicable instructions and requirements; train personnel to be able to respond to a collection of information; search data sources; complete and review the collection of information; and transmit or otherwise disclose the information. An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The OMB control numbers for EPA's regulations are listed in 40 CFR part 9 and 48 CFR chapter 15.


 To comment on the Agency's need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including the use of automated collection techniques, EPA has established a public docket for this ICR under Docket ID Number EPA-HQ-OAR-2016-0094, which is available for online viewing at www.regulations.gov, or in person viewing at the Office of Air and Radiation docket in the EPA Docket Center (EPA/DC), EPA West, Room 3334, 1301 Constitution Avenue, NW, Washington, D.C. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566-1744, and the telephone number for the Office of Air and Radiation is (202) 566-1742. An electronic version of the public docket is available at www.regulations.gov. This site can be used to submit or view public comments, access the index listing of the contents of the public docket, and to access those documents in the public docket that are available electronically. When in the system, select "search," then key in the Docket ID Number identified above. 
 
 Also, you can send comments to the Office of Information and Regulatory Affairs, Office of Management and Budget, 725 17th Street, NW, Washington, D.C. 20503, Attention: Desk Officer for EPA. Please include the EPA Docket ID EPA-HQ-OAR-2016-0094 and OMB Control Number 2060-0717 in your correspondence.
