[Federal Register Volume 81, Number 149 (Wednesday, August 3, 2016)]
[Proposed Rules]
[Pages 51145-51146]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-18396]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 63

[EPA-HQ-OAR-2014-0830; FRL-9950-11-OAR]
RIN 2060-AS99


National Emission Standards for Aerospace Manufacturing and 
Rework Facilities Risk and Technology Review; Clarification

AGENCY: Environmental Protection Agency (EPA).

ACTION: Proposed rule.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) is proposing to 
amend the National Emissions Standards for Hazardous Air Pollutants 
(NESHAP) for Aerospace Manufacturing and Rework Facilities. In the 
``Rules and Regulations'' section of this Federal Register, we are 
clarifying the compliance date for the handling and storage of waste as 
a direct final rule without a prior proposed rule. If we receive no 
significant and relevant adverse comment, we will not take further 
action on this proposed rule.

DATES: Written comments must be received by September 2, 2016.

ADDRESSES: Submit your comments, identified by Docket ID No. EPA-HQ-
OAR-2014-0830, at http://www.regulations.gov. Follow the online 
instructions for submitting comments. Once submitted, comments cannot 
be edited or removed from Regulations.gov. The EPA may publish any 
comment received to its public docket. Do not submit electronically any 
information you consider to be Confidential Business Information (CBI) 
or other information whose disclosure is restricted by statute. 
Multimedia submissions (audio, video, etc.) must be accompanied by a 
written comment. The written comment is considered the official comment 
and should include discussion of all points you wish to make. The EPA 
will generally not consider comments or comment contents located 
outside of the primary submission (i.e., on the Web, cloud, or other 
file sharing system). For additional submission methods, the full EPA 
public comment policy, information about CBI or multimedia submissions, 
and general guidance on making effective comments, please visit http://www2.epa.gov/dockets/commenting-epa-dockets.
    Docket. The EPA has established a docket for this rulemaking under 
Docket ID No. EPA-HQ-OAR-2014-0830. All documents in the docket are 
listed on the http://www.regulations.gov Web site. Although listed in 
the index, some information is not publicly available, e.g., CBI or 
other information whose disclosure is restricted by statute. Certain 
other material, such as copyrighted material, is not placed on the 
Internet and will be publicly available only in hard copy. Publicly 
available docket materials are available either electronically through 
http://www.regulations.gov or in hard copy at the EPA Docket Center, 
EPA WJC West Building, Room 3334, 1301 Constitution Avenue NW., 
Washington, DC. The Public Reading Room is open from 8:30 a.m. to 4:30 
p.m., Monday through Friday, excluding legal holidays. The telephone 
number for the Public Reading Room is (202) 566-1744, and the telephone 
number for the EPA Docket Center is (202) 566-1742.

FOR FURTHER INFORMATION CONTACT: For questions about this proposed 
action, contact Ms. Kim Teal, Sector Policies and Programs Division 
(D243-04), Office of Air Quality Planning and Standards, U.S. 
Environmental

[[Page 51146]]

Protection Agency, Research Triangle Park, North Carolina 27711; 
telephone number: (919) 541-5580; fax number: (919) 541-5450; and email 
address: teal.kim@epa.gov. For information about the applicability of 
the NESHAP to a particular entity, contact Mr. John Cox, Office of 
Enforcement and Compliance Assurance, (202) 564-1395, cox.john@epa.gov.

SUPPLEMENTARY INFORMATION: 
    Organization of this document. The information in this preamble is 
organized as follows:

I. General Information
    A. Why is the EPA issuing this proposed rule?
    B. Does this action apply to me?
    C. What are the amendments in this proposed rule?
II. Statutory and Executive Order Reviews

I. General Information

A. Why is the EPA issuing this proposed rule?

    This document proposes to take action on the NESHAP for Aerospace 
Manufacturing and Rework Facilities. We have published a direct final 
rule to clarify the compliance date for the handling and storage of 
waste in the ``Rules and Regulations'' section of this Federal Register 
because we view this as a noncontroversial action and anticipate no 
significant and relevant adverse comment. We have explained our reasons 
for this action in the preamble to the direct final rule.
    If we receive no significant and relevant adverse comment, we will 
not take further action on this proposed rule. If we receive 
significant and relevant adverse comment, we will withdraw the direct 
final rule and it will not take effect. We would address all public 
comments in any subsequent final rule based on this proposed rule.
    We do not intend to institute a second comment period on this 
action. Any parties interested in commenting must do so at this time. 
For further information, please see the information provided in the 
ADDRESSES section of this document.

B. Does this action apply to me?

    Regulated entities. Categories and entities potentially regulated 
by this action are shown in Table 1 of this preamble.

      Table 1--Industrial Source Categories Affected by This Action
------------------------------------------------------------------------
          Source category                  NESHAP         NAICS \1\ Code
------------------------------------------------------------------------
Aerospace.........................  Aerospace...........          336411
Manufacturing and Rework            Manufacturing and             336412
 Facilities.                         Rework Facilities.
                                                                  336413
                                                                  336414
                                                                  336415
                                                                  336419
                                                                  481111
                                                                  481112
                                                                  481211
                                                                  481212
                                                                  481219
------------------------------------------------------------------------
\1\ North American Industry Classification System.

    Table 1 of this preamble is not intended to be exhaustive, but 
rather to provide a guide for readers regarding entities likely to be 
affected by the final action for the source categories listed. To 
determine whether your facility is affected, you should examine the 
applicability criteria in the appropriate NESHAP. If you have any 
questions regarding the applicability of any aspect of this NESHAP, 
please contact the appropriate person listed in the preceding FOR 
FURTHER INFORMATION CONTACT section of this preamble.

C. What are the amendments in this proposed rule?

    This proposed rule provides a compliance date of December 7, 2018, 
for sources subject to the requirements for handling and storage of 
waste in 40 CFR part 63, subpart GG.
    The EPA is accepting comments only on the specific issue raised in 
this proposed action and the accompanying direct final rule, the 
compliance date for handling and storage of waste. The EPA is not 
reopening or accepting comment on any other aspect of the NESHAP for 
Aerospace Manufacturing and Rework Facilities.

II. Statutory and Executive Order Reviews

    For a complete discussion of the rationale, regulatory text, and 
all of the administrative requirements applicable to this action, see 
the direct final rule in the ``Rules and Regulations'' section of this 
Federal Register.

    Dated: July 26, 2016.
Gina McCarthy,
Administrator.
[FR Doc. 2016-18396 Filed 8-2-16; 8:45 am]
 BILLING CODE 6560-50-P


