DATE:	January 6, 2012

SUBJECT:	Development of the RTR Risk Modeling Dataset for the Secondary
Aluminum Production Source Category

FROM:	Mark Bahner, RTI International

TO:		Rochelle Boyd, Environmental Protection Agency (the EPA)

The purpose of this memorandum is to document the technical approach and
rationale used to develop risk modeling input data for hazardous air
pollutant (HAP) emissions for secondary aluminum production facilities.
This work is being performed pursuant to section 112(f) of the Clean Air
Act as part of the residual risk assessment for facilities that are
subject to the National Emission Standards for Hazardous Air Pollutants
(NESHAP) for Secondary Aluminum Production (40 CFR Part 63, Subpart
RRR).

Facilities Modeled

There are estimated to be 161 facilities subject to the Secondary
Aluminum Production NESHAP. Risk assessment inputs were developed for
155 facilities, as shown in Table 1. There were six facilities that are
subject to the Secondary Aluminum NESHAP that were not included in the
risk assessment input files, as shown in Table 2. The facilities that
were not included in the risk assessment input files included one major
HAP source and five area HAP sources. The major HAP source was not
included because the secondary aluminum equipment at the source consists
of group 2 furnaces, which do not have emission limits under the NESHAP.
The five area sources were not included because they had no equipment
subject to dioxins/furans emissions standards, which are the only
standards applicable to secondary aluminum production area sources. 

Compound-Specific Emissions

The pollutants regulated under subpart RRR are particulate matter (PM),
hydrochloric acid (HCl), total hydrocarbon (THC) and dioxins/furans
(D/F). Emissions standards for various pieces of secondary aluminum
equipment are given in Table 3. 

Subpart RRR uses PM as a surrogate for metallic hazardous air pollutants
(HAPs) and THC is a surrogate for organic HAPs. Since subpart RRR
compliance testing is performed for the surrogate PM and THC, there are
limited test data available for compound-specific metallic and organic
HAP emissions. Therefore, data were obtained from nine companies
performing secondary aluminum production via Clean Air Act Section 114
requests (also known as Information Collection Requests, or ICRs).1 

The metallic HAP data collected consisted of metallic HAP concentrations
in the particulate caught in air pollution control devices serving
various pieces of equipment. The results of this testing are shown in
Table 4. The data in Table 4 can be used to calculate emissions of
specific metallic HAPs from a particular piece of secondary aluminum
equipment. For example, assume a group 1 furnace handling other than
clean charge receives 100,000 tons per year of charge. The allowable
emissions of PM (from Table 3) are 0.4 lb/ton of charge, so allowable
emissions of PM are 40,000 lb/year (or 20 tons per year). The
concentration of antimony (from Table 4) in the PM is 18.6 mg/kg (i.e.,
18.6 parts per million, or ppm). The calculated allowable emissions of
antimony are therefore 20 tpy times 18.6 ppm, or 3.72E-04 tpy. 

The organic HAP data was collected by stack testing thermal chip dryers
and scrap dryer/delacquering decoating kilns, which are the two types of
secondary aluminum equipment that are regulated for THC emissions.
Testing was conducted for both THC emissions (in pounds per ton of feed,
or lb/ton of feed) and individual organic HAPs (also in lb/ton of feed).
The collected information was used to calculate allowable emissions for
each organic HAP. For example, the THC limit for a thermal chip dryer is
0.8 lb/ton of feed. If the test results were 0.4 lb/ton of feed for THC,
and 1E-03 lb/ton of feed for benzene, the allowable benzene emissions
would be 2E-03 lb/ton of feed (i.e., since the measured THC emissions
were half of the NESHAP limit, the measured benzene emissions were
multiplied by two to calculate the allowable emissions. Results for
allowable emissions of organic HAPs are summarized in Table 5, in
kilograms per megagram (kg/Mg) of feed. The results are separated into
volatile organic compounds (VOCs) and semivolatile organic compounds
(SVOCs). 

All-Company ICR Responses

In addition to the nine-company testing ICR sent out on May 27, 2010, an
ICR was sent to all facilities thought to potentially be subject to
subpart RRR.2 Responses to this request were used for many aspects of
the modeling inputs, including:

Latitudes and longitudes of stacks

Height, exhaust gas flow rate, and exhaust gas temperature for stacks

Type of equipment exhausting to stacks (e.g. scrap shredder, thermal
chip dryer, group 1 furnace handling other than clean charge, etc.)

Aluminum production of equipment exhausting to stacks, and

Reported actual emissions 

Three separate types of information regarding equipment production or
capacity were requested:

 Mass of charge (tons/yr) – this was the actual charge in the most
recent year (after 2004)  

Maximum capacity of unit (tons/year), and

Charge during most recent performance test (lb/hr) 

The maximum capacity of the unit (tons/year) was used to estimate
allowable emissions for the unit, whereas actual emissions were based on
the amount of charge for the most recent year (after 2004).  

Allowable Emissions Calculation Procedures

Allowable emissions were calculated as the product of the maximum
capacity of the unit (from the all-company ICR response) times a
conversion factor that calculated the allowable emissions of the
surrogate pollutant (e.g., PM or THC) times the concentration of the
compound-specific metallic or organic HAP (from the nine-company testing
ICR responses, as shown in Tables 4 and 5).  

Table 6 shows how conversion factors were calculated for each piece of
equipment and pollutant, and Table 7 summarizes the conversion factors
used in the allowable emissions calculations. The units of the
conversion factors are allowable tons of surrogate pollutant emissions
(e.g. PM, THC, HCl) per ton of feed. 

Table 8 provides example allowable emissions calculation results for a
HAP metal (antimony), HCl, D/F (in toxic equivalents), a volatile
organic HAP (acrylonitrile), and a semi-volatile organic HAP
(acenaphthene). 

Actual Emissions Calculation Procedures

Actual emissions were calculated as a fraction of allowable emissions,
using the actual amount charged in the most recent year (from the
all-company ICR responses), and the actual emissions of surrogate
pollutants (from the all-company ICR responses). 

Table 9 provides example actual emissions calculation results for a HAP
metal (antimony), HCl, D/F (in toxic equivalents), a volatile organic
HAP (acrylonitrile), and a semi-volatile organic HAP (acenaphthene). 

Stack Locations and Stack Characteristics

™ and sent to facilities for confirmation or correction where time was
available. The confirmation or correction consisted of sending
facilities a picture (.jpg) file of the ICR response latitudes and
longitudes plotted in Google Earth™, with a request that the facility
either confirm or correct the plotted locations. Where there was
insufficient time to obtain facility responses, the results plotted in
Google Earth™ were simply checked to ensure that the stack latitudes
and longitudes were located on a building at the facility site, or at a
control device near a building. Where the results were not located on a
building at the facility site or a control device near a building, the
latitudes and longitudes were adjusted. 

Default Values

Where emissions were not reported in the ICR responses, default emission
factors were used. These default emission factors were the average
values determined from test results that were reported and credible.
Table 10 summarizes the default emission factors used for modeling. For
example, the average D/F emission rate during testing of Group 1
furnaces  processing other than clean charge was 2.16 µg/Mg of feed,
and the emission limit is 15 µg/Mg of feed. Therefore, the average test
result was 0.144 times the standard. Similarly, the average PM emission
rate during testing of Group 1 furnaces firing other than clean charge
was 0.184 lb/ton of feed, and the emission limit is 0.4 lb/ton of feed;
therefore, the average test result was 0.460 times the standard.

Default production capacity factor values were also used when the actual
production in the most recent year was not given, or was claimed as
Confidential Business Information (CBI). Production capacity factor is
the ratio of the actual production for the most recent year divided by
the production capacity. As with the default emission factors, the
default production capacities were taken as the average production
capacity for all equipment of the same type. Table 11 summarizes default
production capacities.

Allowable and Actual Emissions Results for D/F

D/F was determined to be a risk driver for both major sources and area
sources. (In fact, D/F was the only HAP modeled for area sources.)
Therefore, calculated allowable and actual emissions of D/F (in TEQ) for
major sources are presented in Table 12 and for area sources in Table
13.

Quality Control Checks and Resulting Changes

™, as previously described. Anomalously high production values for RTI
#120 (Crestwood Metals) were resolved through discussions with a
consultant for that company. For RTI #257 and #352, test reports were
received but no Excel™ workbook ICR responses were received.
Therefore, risk input files were developed from the test reports and
Google Earth™ images. Similarly, air permits were available for RTI
#85 and #384, but no Excel™ workbook ICR responses were received. Risk
input files were therefore developed from the air permits and Google
Earth™ images. In general, emissions from non-Subpart RRR equipment
were input directly into risk files. One facility (RTI #292, NEI8066)
reported anomalously high emissions of nickel from a painting line;
contacts with the facility established that the painting line did not
emit nickel.

References

.	Letter, Peter Tsirigotis (U.S. EPA) to Michael Palazollo (Alcoa) et
al., “Requirement to provide information according to Title 42 of the
United States Code, Chapter 85, Subchapter I, Part A, section 7414 (42
U.S.C 7414),” May 27, 2010. This was the cover letter for the
nine-company testing ICR.

2.	Letter, Peter Tsirigotis (U.S. EPA) to Russell Mayfield (Mayfield
Salvage Company) et al., “Requirement to provide information according
to 42 U.S.C 7414,” February 7, 2011. This was the cover letter for the
all-company data collection ICR.

List of Tables

  TOC \h \z \t "Table Title,1"    HYPERLINK \l "_Toc313611883"  Table
1.  	List of 155 Secondary Aluminum Production Facilities Modeled for
Residual Risk	  PAGEREF _Toc313611883 \h  6  

  HYPERLINK \l "_Toc313611884"  Table 2.  	List of 6 Aluminum
Production Facilities Not Modeled for Secondary Aluminum Risk	  PAGEREF
_Toc313611884 \h  12  

  HYPERLINK \l "_Toc313611885"  Table 3. 	Emission Standards for New and
Existing Affected Sources	  PAGEREF _Toc313611885 \h  13  

  HYPERLINK \l "_Toc313611886"  Table 4.  	Summary of Metallic HAP Test
Results	  PAGEREF _Toc313611886 \h  15  

  HYPERLINK \l "_Toc313611887"  Table 5.  	Summary of Organic HAP Test
Results, Allowable Emissions (kg/Mg charge)	  PAGEREF _Toc313611887 \h 
16  

  HYPERLINK \l "_Toc313611888"  Table 6. 	Calculations for Conversion
Factors	  PAGEREF _Toc313611888 \h  17  

  HYPERLINK \l "_Toc313611889"  Table 7. 	Conversion Factor Summary	 
PAGEREF _Toc313611889 \h  20  

  HYPERLINK \l "_Toc313611890"  Table 8. 	Default Emission Factors	 
PAGEREF _Toc313611890 \h  21  

  HYPERLINK \l "_Toc313611891"  Table 9. 	Default Capacity Factors	 
PAGEREF _Toc313611891 \h  21  

  HYPERLINK \l "_Toc313611892"  Table 10. 	Allowable Emissions Example
Calculations	  PAGEREF _Toc313611892 \h  22  

  HYPERLINK \l "_Toc313611893"  Table 11. 	Actual Emissions Example
Calculations	  PAGEREF _Toc313611893 \h  22  

  HYPERLINK \l "_Toc313611894"  Table 12. 	Allowable and Actual D/F
Emissions, Major Sources	  PAGEREF _Toc313611894 \h  23  

  HYPERLINK \l "_Toc313611895"  Table 13. 	Allowable and Actual D/F
Emissions, Area Sources	  PAGEREF _Toc313611895 \h  25  

 



Table 1.  List of 155 Secondary Aluminum Production Facilities Modeled
for Residual Risk

RTI Number	Facility ID	Facility Name	Facility Address	Facility City
Facility State	Zip Code	Major/Area Source Status

2	NEI3AL01123SMA	SMA-Mayfield Salvage Co.	P.O. Box 129	Alexander City	AL
35011	Area

7	NEI3AL01109Ell	Ellis Metals	231 South	Brundidge	AL	36010	Area

11	NEI3AL01071Imp	Imperial Aluminum - Scottsboro	7525 Roy Owens Blvd.
Scottsboro	AL	35769	Area

17	NEI3AR05017Liv	Livingston Pecan & Metal Inc.	219 Commerce Street	Lake
Village	AR	71653	Area

18	NEI3AR05119Met	Metro Scrap Metals, Inc.	6915 Hwy. 70 E.	North Little
Rock	AR	72117	Area

20	NEI3AR05033Dav	Davis Iron & Metal	611 South 23rd Street	Van Buren	AR
72956	Area

23	NEI3AZ04019Amc	Amcep Metals Company	4484 East Tennessee Street	Tucson
AZ	85714	Area

25	NEI3CA06037Tho	Thorock Metals Company Inc.	435 East Weber Ave	Compton
CA	90222	Area

39	NEI3FL12115Al	Al'S Pick N Pull, Inc.	4801 Preymore Street	Osprey	FL
34229	Area

50	NEI3IA19061Dit	Dittmer's Recycling	19108 Herber Rd.	Dubuque	IA	52001
Area

53	NEI3IA19019Tou	Tournier's Recycling Inc.	1644 Nathan Bethel Ave.
Independence	IA	50644	Area

55	NEI3IA19195Buc	Buck's Auto Recycling	1541 A Hwy 9	Manly	IA	50456	Area

56	NEI3IA19097BG	B. G. Salvage	7141 Hurstville Rd.	Maquoketa	IA	52060
Area

63	NEI3IN18005Nik	Nikkei MC Aluminum America, Inc	6875 South Inwood Dr.
Columbus	IN	47201	Area

65	NEI3IN18089Uni	United Tranz Core LLC	1200 145th Street 4400 Homerlee
Ave.	East Chicago	IN	46312	Area

68	NEI3IN18069Tra	Transmetco, Inc.	1750 East Riverfork Drive	Huntington
IN	46750	Area

71	NEI3IN18169Met	Metal Source LLC	1743 S. Wabash St.	Wabash	IN	46992
Area

72	NEI3IN18069Hea	Heartland Aluminum	706 East 9th Street	Warren	IN	46792
Area

73	NEI3KS20001Ray	Rays Metal Depot	320 W Highway 54	La Harpe	KS	66751
Area

74	NEI3KS20151Arn	Arnett Automotive	308 Pedigo	Pratt	KS	67124	Area

76	NEIKS20173DON	Donham Company	1631 S. Hoover Ct.	Wichita	KS	67209	Area

79	NEI11365	Rio Tinto Alcan	9404 State Route 2096	Robards	KY	42452	Major

80	NEI3MA25013Cen	Center Street Auto	651 Center St.	Chicopee	MA	01013
Area

83	NEI3MA25023Mid	Middleboro Recycling	128 Bedford	Middleboro	MA	02346
Area

85	NEIMD24005MAR	Maryland Recycle Company	8920 Yellowbrick Road
Baltimore	MD	21237	Area

87	NEI3MD24031Mon	Montgomery Scrap	15000 Southlawn Dr.	Rockville	MD
20850	Area

89	NEI3MI26163AMP	AMP Recycling Inc.	411 South Fort	Detroit	MI	48217
Area

91	NEI3MI26077Kai	Kaiser Aluminum Fabricated Products, LLC	5205 Kaiser
Drive	Kalamazoo	MI	49048	Area

93	NEI3MN27063Ron	Ron Rehnelt Salvage	Berg Street	Lakefield	MN	56150
Area

95	NEI3MN27103Man	Mankato Iron & Metal Company	215 West Elm Street
Mankato	MN	56001	Area

97	NEI3MN27015New	New Ulm Steel & Recycling, Inc.	218 19th Street	New
Ulm	MN	56073	Area

101	NEI2MO097008	Commercial Metals Company	12th and Iowa Streets	Joplin
MO	64801	Area

112	NEI3NH33015Web	Weber Auto And Truck Parts Corp.	135 Island Pond Rd
Derry	NH	03038	Area

117	NEI3NY36001NH	N. H. Kelman, Inc.	41 Euclid Street	Cohoes	NY	12047
Area

118	NEI3NY36067Met	Metalico Aluminum Recovery	6223 Thompson Rd.	East
Syracuse	NY	13057	Area

120	NEI3AL01123Cre	Crestwood Metal Company	1100 Lincoln Avenue	Holbrook
NY	11741	Major

124	NEI3NY360991Luf	Luffman Metal Company	2790 Thorpe Road	Seneca Falls
NY	13148	Area

126	NEI3OH39049G-C	G-Cor Automotive	2100 Refugee Road	Columbus	OH	43207
Area

134	NEI3OH39133Alu	Aluminum Wheel Technologies, Inc.	446 W Lake St.
Ravenna	OH	44266	Area

135	NEI3OH39023Sta	Staker Alloys	1075 James St.	Springfield	OH	45503
Area

136	NEI3OH39023Cit	City Wide Towing And Auto Wrecking	930 Dayton Ave.
Springfield	OH	45506	Area

138	NEI3OH39099Div	Diver-Steel City Auto Crushers	590 Himrod Avenue
Youngstown	OH	44506	Area

141	NEI3OK40101Yaf	Yaffe Iron & Metal Co., Inc.	Corner G and Lexington
Ave	Muskogee	OK	74403	Area

145	NEI3PA42051Ass	Assad Iron & Metals, Inc.	Albany Road	Brownsville	PA
15417	Area

154	NEI3PA42011Rea	Reading Alloys Inc. - Robesonia	Old W Penn Ave
Robesonia	PA	19551	Area

156	NEI3PA42133Pen	Pennex Aluminum Company	50 Community Street
Wellsville	PA	17365	Area

164	NEI3TN47113Mos	Most, Inc. - Jackson	355 James Lawrence Road	Jackson
TN	38301	Area

165	NEI3TN47059MD	MD Recycling, Inc.	1230 Pottertown Road	Midway	TN
37809	Area

167	NEITN1190123	Tennessee Aluminum Processors, Inc.	7207 Hoover Mason
Road	Mount Pleasant	TN	38474-1037	Area

169	NEI3TN47123Val	Valley Recycling	325 Industrial Park Road	Sweetwater
TN	37874	Area

173	NEI3TX48113Bis	Bishop Engine And Automotive	Building B 224 North
Corinth Street	Dallas	TX	75203	Area

190	NEI3WI55075Kar	Karl Schmidt Unisia, Inc.	1731 Industrial Parkway
Marinette	WI	54143	Area

191	NEIWI079241213720	Miller Compressing Co	1640 W Bruce St	Milwaukee	WI
53204	Area

195A	NEI10933	Alcoa, Inc. (North plant)	2300 North Wright Rd	Alcoa	TN
37701	Major

195B	NEI10933b	Alcoa, Inc. (South plant)	300 North Hall Rd	Alcoa	TN
37701	Major

196	NEI3TN47119Sme	Smelter Service Corp.	400 Arrow Mines Rd	Mount
Pleasant	TN	38474-1605	Area

198	NEI3KY21151Nov	Novelis Corporation	302 Mayde Rd	Berea	KY	40403	Major

199	NEI11360	Southwire Co	1987 State Route 271 North	Hawesville	KY	42348
Major

200	NEI11362	Aleris Rolled Products, Inc.	1372 State Route 1957
Lewisport	KY	423510480	Major

203	NEI11394	Kaiser Aluminum Fabricated Products, LLC	600 Kaiser Drive
Heath	OH	43056	Area

207	NEI12240	Alcoa Inc.	4879 State St	Riverdale	IA	52722	Major

210	NEI1532	Golden Aluminum Inc.	1405 East 14th Street	Fort Lupton	CO
80621-2718	Area

211	NEI18317	Hydro Aluminum Wells - Monett	120 Industrial Drive	Monett
MO	65708	Major

212	NEI3AZ04013Hal	Halna, Inc.	249 S. 51st Ave.	Phoenix	AZ	85043	Area

213	NEI3CA06001Cus	Custom Alloy Scrap Sales, Inc.	2730 Peralta St.
Oakland	CA	94607	Area

222	NEI22948	Vista Metals Corporation	13425 Whittram Ave	Fontana	CA
92335	Area

224	NEI3AR05115JW	JW Aluminum Company	777 Tyler Road	Russellville	AR
72802	Major

225	NEI2AZT18161	Alcoa Forgings	6833 W. Willis Rd.	Chandler	AZ	85226
Area

228	NEI2IA01-089	Nichols Aluminum Casting	2101 JM Morris Blvd	Davenport
IA	52802	Major

231	NEI3MI26145Ale	Aleris Specification Alloys, Inc.	2600 Nodular Drive
Saginaw	MI	48601	Area

232	NEI3MI26023Ale	Aleris Recycling, Inc/Aleris Specification Alloys,
Inc.	368 West Garfield Avenue	Coldwater	MI	49036	Major

248	NEI3OH39019Alu	Aluminum One	217 Roosevelt St	Minerva	OH	44657-1541
Area

252	NEI3PA42075Bec	Beck Aluminum Alloys	24 Keystone Dr	Lebanon	PA
17042-9791	Area

253	NEI3TN47105Ale	Aleris Recycling, Inc.	388 Williamson Dr	Loudon	TN
37774	Area

255	NEI3TX48181Kai	Kaiser Aluminum Fabricated Products, LLC	4300 S Sam
Rayburn Fwy	Sherman	TX	75090-9311	Area

256	NEI2TXT17701	Hydro Aluminum	2000 Economic Drive	Commerce	TX	75428
Area

257	NEI31872	Scepter, Inc.	6487 North Scepter Rd	Bicknell	IN	47512	Area

258	NEI32032	GM Powertrain Bedford Facility	105 GM Drive	Bedford	IN
47421	Area

260	NEI3IN18169Ale	Aleris Specification Alloys, Inc.	4525 West Old 24
Wabash	IN	46992-0466	Major

261	NEI32661	Alcoa Inc. - Warrick Operations	JCT Indiana Highways 66 &
61	Newburgh	IN	47630	Major

264	NEI34464	Noranda Aluminum, Inc.	391 Saint Jude Industrial Park	New
Madrid	MO	63869	Major

266	NEI3MO29510JW	JW Aluminum, St. Louis	6100 S. Broadway	St. Louis	MO
63111	Major

269	NEI3NY36075Nov	Novelis Corporation	448 County Rt 1A	Oswego	NY	13126
Major

270	NEI39458	Alcoa Massena Operations (West Plant)	Park Avenue East
Massena	NY	13662	Major

272	NEI41217	Alumax of SC, Incorporated	3575 Hwy 52 N	Goose Creek	SC
29445	Major

273	NEI3SC45015JW	JW Aluminum Co	2475 Trenton Ave	Williamsport	PA	17701
Major

274	NEI42328	Aluminum Co. of America - Wenatchee Works	6200 Malaga Alcoa
Hwy	Malaga	WA	98828	Major

276	NEI43018	Mercury Marine - Fond Du Lac Complex	W6250 W Pioneer Rd
Fond Du Lac	WI	54935	Major

278	NEI47821	Trialco, Inc.	900 E. 14th St.	Chicago Heights	IL	60411	Area

279	NEI3IL17031All	Allied Metal Co.	4528 W. Division Street	Chicago	IL
60616	Area

282	NEI3LA22083Sap	Sapa Extrusions, L.L.C.	142 Sapa Drive	Delhi	LA	71232
Area

283	NEI6464	Alcoa - Rockdale Operations	Market Road 1786	Rockdale	TX
76567	Major

284	NEI3TX48067Alu	Alumax Mill Products, Inc.	300 Alumax Dr	Texarkana	TX
75501	Major

288	NEI3PA42071Alu	Alumax Mill Products Inc.	1480 Manheim Pike	Lancaster
PA	17604	Major

289	NEI7212	Alcoa Mill Products - San Antonio	14555 Old Corpus Christi
Road	Elmendorf	TX	78112	Major

291	NEI790	Sapa Extrusion	2500 Alumax Road	Yankton	SD	57078	Major

292	NEI8066	William L. Bonnell Co., Inc.	25 Bonnell St	Newnan	GA	30263
Major

294	NEI8093	Novelis Corporation	1261 Willow Run Rd.	Greensboro	GA
306420837	Major

298a	NEI8522	Wise Alloys LLC-Alloys Reclamation Plant	1009 Ford Road
Muscle Shoals	AL	35661	Major

298b	NEI8522b	Wise Alloys LLC - Alloys Plant	4805 Second St.	Muscle
Shoals	AL	35661	Major

299	NEI3TN47159Wil	William L. Bonnell Company, Inc.(The)	53 Hwy, Bonnell
Lane	Carthage	TN	38563	Major

302	NEI3AL01055Ten	Tennessee Aluminum Processors, Inc.	205 Spurline Dr
Gadsden	AL	35903-3476	Area

303	NEIALT$4622	Aleris Specifiation Alloys, Inc.	47 Brogdon Rd	Steele	AL
35987	Major

305	NEIART$10783	Reynolds Foil Inc, dba reynolds Consumer Products
Company	1333 Hwy. 270	Malvern	AR	72104	Major

306	NEIAZ354	Imsamet of Arizona	3829 S. Estrella Pky.	Goodyear	AZ	85338
Area

307	NEI3CA06037Cus	Custom Alloy Light Metals	13329 Ector Street	City Of
Industry	CA	91746	Area

310	NEI3CA06071TST	TST, Inc.	11601 Etiwanda Ave	Fontana	CA	92337	Area

312	NEICAT$12566	Kaiser Aluminum & Chem Corp.	6250 E. Bandini Blvd.	Los
Angeles	CA	90040	Area

314	NEICO1011137	Dionisio Metal and Iron, Inc.	1004 Palo Alto Street
Pueblo Area	CO	81001	Area

316	NEIFL1030114	Metal Industries, Inc.	301 Commerce Blvd	Oldsmar	FL
34677	Area

318	NEIFL1090013	Hydro Aluminum North America, Inc	200 Riviera Blvd.	St
Augustine	FL	32086	Area

322	NEI3ID16055Ale	Aleris Recycling	16168 W Prairie Ave	Post Falls	ID
83854	Area

324	NEI3IL17031Ale	Aleris Recycling	400 E. Lincoln Hwy.	Chicago Heights
IL	60411	Major

329	NEI3IL17091KB	KB Cores - Kankakee	288 W South Tec Dr	Kankakee	IL
60901	Area

335	NEI3IN18089Jup	Jupiter Aluminum Corporation	1745 - 165th Street
Hammond	IN	46320	Major

336	NEIIN00286	Superior Aluminum Alloys	14214 Edgerton Road	New Haven	IN
46774	Major

338	NEI3IN18093Rec	Recycling Services of Indiana	4635 Peerless Rd
Bedford	IN	47421	Major

339	NEIIN1690003	Aleris Recycling - Wabash Operations	305 Dimension Ave
Wabash	IN	46992	Area

341	NEIIN567	Aluminum Recovery Technologies, Inc.	2170 Production Road
Kendalville	IN	46755	Major

344	NEIKY0090065	J.L. French Corp	20 Prestwick Drive	Glasgow	KY	42141
Major

345	NEI3KY21017Ken	Kentucky Smelting Technology, Inc.	140 Bellafato Dr
Paris	KY	40361	Area

347	NEIKY1010130	Hydro Aluminum - Louisville	5801 Riverport Rd	Henderson
KY	42420	Area

348	NEIKY101233	Audubon Metals, L.L.C.	3055 Ohio Drive	Henderson	KY
42420	Area

349	NEIKY2103100	Aleris Recycling, Inc.	609 Gardner Camp Road
Morgantown,	KY	42261	Major

351	NEIKY2114100	Logan Aluminum	6920 Lewisburg Rd	Russellville	KY	42276
Major

352	NEIKY22700135	Owl's Head Alloys, Inc	187 Mitch McConnell Drive
Bowling Green	KY	42101-7519	Major

354	NEIKY938	Electro Cycle, Inc.	230 Baldwin Drive	Madisonville	KY	42431
Area

363	NEIMIN5957	Aleris Recycling	267 N. Fillmore Rd	Coldwater	MI	49036
Major

364	NEIMIN6013	Continental Aluminum	29201 Milford Rd.	New Hudson	MI
48165	Area

369	NEIMO1130046	Most, Inc. - Troy	50 Cherry Blossom Way	Troy	MO	63379
Area

372	NEIMST$5321	Taber Metals Gulfport L.P.	1900 34th Street	Gulfport	MS
39501	Area

375	NEI3NJ34007Alu	Aluminum Shapes, L.L.C.	9000 River Rd	Delair	NJ
08110-3296	Major

376	NEINJR50539	State Metal Industries, Inc.	941 South Second St	Camden
NJ	08103	Area

381	NEI3NY360991Sce	Scepter Inc. - Seneca Falls Operations	11 Lamb Road
Seneca Falls	NY	13148	Area

384	NEIOH15144601GNWLM13	GNW Aluminum, Inc.	1356 Harrisburg Rd	Alliance
OH	44601	Area

385	NEI3OH39165Qua	Quantum Metals	3675 Taft Ave.	Lebanon	OH	45036	Area

389	NEI3OH39157Ale	Aleris Recycling	7335 Newport Road SE	Uhrichsville	OH
44683	Major

390	NEIOHT$6308	Aleris Rolled Products Inc.	7319 Newport Rd. S.E.
Uhrichsville	OH	44683	Major

392	NEIOK1832	Aleris Recycling, Inc.	1508 N. 8th Street	Sapulpa	OK	74067
Area

394	NEI3PA42125Rit	Ritchey Metals Co., Inc. - Hendersonville Plant	30
Georgetown Rd	Hendersonville	PA	15339	Area

395	NEIPA23-2083	Sapa Extrusions	53 Pottsville St.	Cressona	PA	17929
Major

398	NEIAL01073Ber	Berman Brothers Iron & Metal 	616 North 33rd Place
Birmingham	AL	35222	Area

401	NEI3TN47085Sce	Scepter, Inc.	1485 Scepter Ln	Waverly	TN	37185-3290
Area

404	NEITNT$5135	Norandal USA, Inc.	400 Bill Brooks Drive	Huntingdon	TN
38344	Area

405	NEI3UT49049Sap	Sapa Extrusions, Inc.	1550 N Kirby Ln	Spanish Fork	UT
84660	Area

407	NEI3VA51041Ale	Aleris Rolled Products, Inc.	1801 Reymet Road
Richmond	VA	23237-3794	Area

408	NEIWA0630023	Kaiser Aluminum Washington	15000 E Euclid	Spokane	WA
99216	Area

409	NEIWA19906	Intalco Aluminum Corp Ferndale	4050 Mountain View Rd
Ferndale	WA	98248	Major

412	NEI3WI55071BB	B & B Metals Processing Co.	14520 Pioneer Rd.	Newton
WI	53063	Area

415	NEI3WI15500JL	J. L. French Corp.	4243 Gateway Drive	Sheboygan	WI
53081	Major

416	NEIWI4600412	J. L. French Corp.	3101 South Taylor Dr	Sheboygan	WI
53081	Major

420	NEIWIT$8394	Beck Aluminum Racine	1349 23rd St	Racine	WI	53403	Area

421	NEIWV0043	Alcan Rolled Products, L.L.C. 	Route 2 South	Ravenswood	WV
26164	Major

422	NEI3WV54095Ale2	Aleris Recycling, Inc.	3816 S State Rt 2	Friendly	WV
26146	Area

423	NEI3WV54095Ale1	Aleris Recycling Bens Run LLC	4203 S State Rt 2
Friendly	WV	26146	Area

Table 2.  List of 6 Aluminum Production Facilities Not Modeled for
Secondary Aluminum Risk

RTI Number	Facility ID	Facility Name	Facility Address	Facility City
Facility State	Zip Code	Major/Area Source Status

6

Bermco Bros Iron & Metal Co.	2201 Fifth Avenue, North	Bessemer	AL	35020
Area

69

Alcoa Inc - Lafayette Operations	3131 East Main Street	Lafayette	IN
47905	Area

163

Bodine Aluminum - Tennessee	301 James Lawrence Rd	Jackson	TN	38301	Area

208	NEI12468	Columbia Falls Aluminum Co.	2000 Aluminum Drive	Columbia
Falls	MT	59912	Major

360	NEIMIB6178	Huron Valley Steel Corp	41000 Huron River Dr	Belleville
MI	48111	Area

362	NEIMIM4547	Fritz Products	255 Marion	River Rouge	MI	48218	Area





Table 3. Emission Standards for New and Existing Affected Sources

Affected source/ Emission unit	Pollutant	Limit	Units

All new and existing affected sources and emission units that are
controlled with a PM add-on control device and that choose to monitor
with a Continuous Opacity Monitor (COM) and all new and existing
aluminum scrap shredders that choose to monitor with a COM or to monitor
visible emissions	Opacity	10	Percent

New and existing aluminum scrap shredder	PM	0.01	gr/dscf

New and existing thermal chip dryer	THC

D/Fa	0.80

2.50	lb/ton of feed

µg TEQ/Mg of feed

New and existing scrap dryer/delacquering kiln/decoating kiln

                            Or	PM

HCl

THC

D/Fa	0.08

0.80

0.06

0.25	lb/ton of feed

lb/ton of feed

lb/ton of feed

µg TEQ/Mg of feed

Alternative limits if afterburner has a design residence time of at
least 1 second and operates at a temperature of at least 1400 °F	PM

HCl

THC

D/Fa	0.30

1.50

0.20

5.0	lb/ton of feed

lb/ton of feed

lb/ton of feed

µg TEQ/Mg of feed

New and existing sweat furnace	D/Fa	0.80	ng TEQ/dscm @ 11% O2b

New and existing dross-only furnace	PM	0.30	lb/ton of feed

New and existing in-line fluxerc 	HCl

PM	0.04

0.01	lb/ton of feed

lb/ton of feed

New and existing in-line fluxer with no reactive fluxing

No limit	Work practice: no reactive fluxing

New and existing rotary dross cooler	PM	0.04	gr/dscf

New and existing clean furnace (Group 2)

No limit	Work practices: clean charge only and no reactive fluxing

New and existing group 1 melting/holding furnace (processing only clean
charge)c 	PM

HCl	0.80

0.40

or

10	lb/ton of feed

lb/ton of feed

percent of the HCl upstream of an add-on control device

New and existing group 1 furnacec 	PM

HCl

	0.40

0.40

or

10	lb/ton of feed

lb/ton of feed

percent of the HCl upstream of an add-on control device

	D/Fa	15.0	µg TEQ/Mg of feed

New and existing group 1 furnacec with clean charge only	PM

HCl	0.40

0.40

or	lb/ton of feed

lb/ton of feed



10	percent of the HCl upstream of an add-on control device

	D/Fa	No Limit	Clean charge only

New and existing secondary aluminum processing unita,d (consists of all
existing group 1 furnaces and existing in-line flux boxes at the
facility, or all simultaneously constructed new group 1 furnaces and new
in-line fluxers)	PMe

 

	HClf

 

a D/F limit applies to a unit at a major or area source.

b Sweat furnaces equipped with afterburners meeting the specifications
of §63.1505(f)(1) are not required to conduct a performance test.

c These limits are also used to calculate the limits applicable to
secondary aluminum processing units.

d Equation definitions: LiPM = the PM emission limit for individual
emission unit i in the secondary aluminum processing unit [kg/Mg
(lb/ton) of feed]; Ti = the feed rate for individual emission unit i in
the secondary aluminum processing unit; LtPM = the overall PM emission
limit for the secondary aluminum processing unit [kg/Mg (lb-ton) of
feed]; LiHCl = the HCl emission limit for individual emission unit i in
the secondary aluminum processing unit [kg/Mg (lb/ton) of feed]; LtHCl =
the overall HCl emission limit for the secondary aluminum processing
unit [kg/Mg (lb/ton) of feed]; LiD/F = the D/F emission limit for
individual emission unit i [µg TEQ/Mg (gr TEQ/ton) of feed]; LtD/F =
the overall D/F emission limit for the secondary aluminum processing
unit [µg TEQ/Mg (gr TEQ/ton) of feed]; n = the number of units in the
secondary aluminum processing unit.

e In-line fluxers using no reactive flux materials cannot be included in
this calculation since they are not subject to the PM limit.

f In-line fluxers using no reactive flux materials cannot be included in
this calculation since they are not subject to the HCl limit.

g Clean charge furnaces cannot be included in this calculation since
they are not subject to the D/F limit.

Table 4.  Summary of Metallic HAP Test Results

Metallic HAP	Concentration in Particulate (mg/kg)

	Aluminum Scrap Shredder	Thermal Chip Dryer	Scrap Dryer/ Delacquering/
Decoating Kiln	Group 1 Furnace --Handling other than clean charge	Group
1 Furnace -- Clean charge only	Dross-only Furnace	In-line Fluxer 

Antimony	9.2	34.1	55.6	18.6	18.6	0.5	0.5

Arsenic	6.3	449.1	4.3	1.9	1.9	0.5	0.5

Beryllium	1.4	0.9	2.0	0.5	0.5	2.8	0.5

Cadmium	39.1	17.1	34.8	13.4	13.4	0.5	1.9

Chromium III	289	458	168	11	11	460	4

Chromium VI	0.2	3.6	0.2	0.2	0.2	0.3	0.3

Cobalt	14.0	28.8	9.4	1.3	1.3	2.0	1.1

Lead	935.7	2767.8	416.7	32.7	32.7	4.9	0.5

Manganese	1275	2053	627	101	101	3400	100

Mercury, elemental	0.534	0.076	0.487	0.191	0.191	0.008	0.008

Mercury, gaseous	0.067	0.010	0.061	0.024	0.024	0.001	0.001

Mercury, particulate	0.067	0.010	0.061	0.024	0.024	0.001	0.001

Nickel	118	1090	79	13	13	27	14

Selenium	1.6	15.8	23.1	4.1	4.1	0.5	1.9



Table 5.  Summary of Organic HAP Test Results, Allowable Emissions
(kg/Mg charge)

Organic HAP	Thermal Chip Dryer	Scrap Dryer/ Delacquering/ Decoating Kiln

Volatile Organic Compounds (VOC)



Acrylonitrile   107-13-1 	9.89E-04	1.51E-03

Benzene   71-43-2 	2.57E-03	5.29E-03

Bromodichloromethane   75-27-4 	3.24E-06	0.00E+00

Carbon disulfide   75-15-0 	1.06E-04	3.80E-03

Carbon tetrachloride   56-23-5 	2.38E-04	2.04E-05

Chlorodibromomethane   124-48-1 	4.62E-06	0.00E+00

Chloroform  67-66-3 	2.43E-04	3.05E-04

Chloroprene  126-99-8 	7.34E-06	0.00E+00

Dibromomethane   74-95-3 	1.21E-04	0.00E+00

1,1-Dichloroethane   75-34-3 	3.24E-06	0.00E+00

1,2-Dichloroethane  107-06-2 	5.13E-05	2.07E-05

1,1-Dichloroethene   75-35-4 	8.26E-06	0.00E+00

trans-1,2-Dichloroethene   156-60-5 	9.56E-05	0.00E+00

1,2-Dichloropropane  78-87-5 	4.04E-06	0.00E+00

1,3-Dichloropropene  542-75-6 	9.93E-05	0.00E+00

Methylene chloride   75-09-2 	1.75E-03	1.44E-03

Tetrachloroethene   127-18-4 	1.77E-04	5.26E-05

Toluene   108-88-3 	1.31E-03	4.81E-03

1,1,1-Trichloroethane   71-55-6 	4.28E-06	0.00E+00

1,1,2-Trichloroethane   79-00-5 	3.98E-06	0.00E+00

Trichloroethene   79-01-6 	9.62E-05	2.48E-05

Trichlorofluoromethane   75-69-4	5.06E-04	5.06E-04

Semi-volatile Organic Compounds (SVOC)



Acenaphthene   83-32-9	9.23E-06	4.05E-04

Acenaphthylene   208-96-8	3.88E-05	1.71E-03

Anthracene   120-12-7	8.12E-06	3.17E-04

Benz(a)anthracene   56-55-3	4.69E-07	1.08E-04

Benzo(a)pyrene   50-32-8	6.68E-07	0.00E+00

Benzo(b)fluoranthene   205-99-2	4.99E-06	7.90E-07

Benzo(g,h,i)perylene   191-24-2	2.62E-06	1.66E-04

Benzo(k)fluoranthene   207-08-9	3.07E-06	0.00E+00

Chrysene   218-01-9 	3.59E-06	1.46E-04

Dibenz(a,h)anthracene   53-70-3	4.12E-07	0.00E+00

Fluoranthene   206-44-0 	8.66E-05	8.48E-04

Fluorene   86-73-7 	8.05E-05	4.69E-04

Indeno(1,2,3-cd)pyrene   193-39-5 	5.04E-07	0.00E+00

Naphthalene  91-20-3	3.04E-04	8.15E-02

Phenanthrene   85-01-8 	2.11E-04	4.36E-03

Pyrene   129-00-0 	4.89E-05	9.62E-04



Table 6. Calculations for Conversion Factors

 

 

  

Table 7. Conversion Factor Summary 

Equipment	Pollutant	Conversion Factor

Thermal Chip Dryer	THC	1.00E-03

Thermal Chip Dryer	D/F	2.50E-12

Scrap Dryer/delacquering/decoating kiln	PM	1.50E-04

Scrap Dryer/delacquering/decoating kiln	HCl	7.50E-04

Scrap Dryer/delacquering/decoating kiln	THC	1.00E-03

Scrap Dryer/delacquering/decoating kiln	D/F	2.50E-13

Sweat furnace	D/F	3.70E-12

Aluminum Scrap Shredder	PM	3.75E-04

Dross-only furnace	PM	1.50E-04

In-line fluxer 	HCl	2.00E-05

In-line fluxer 	PM	5.00E-06

Group 1 melting/holding furnace (processing only clean charge) 	PM
4.00E-04

Group 1 melting/holding furnace (processing only clean charge) 	HCl
2.00E-04

Group 1 Furnace—Handling other than clean charge	PM	2.00E-04

Group 1 Furnace—Handling other than clean charge	HCl	2.00E-04

Group 1 Furnace—Handling other than clean charge	D/F	1.50E-11

Group 1 Furnace—Clean charge only	PM	2.00E-04

Group 1 Furnace—Clean charge only	HCl	2.00E-04





Table 8. Default Emission Factors 

Pollutant	Equipment	Emissions during testing	Standard	Units	Fraction,
test/standard

Dioxin/Furans	Group I furnace handling other than clean charge	2.16	15
ug/Mg	0.144

	Delacquering/decoating kiln	1.34	5	ug/Mg	0.269

	Chip dryer	0.277	2.5	ug/Mg	0.111

	Sweat Furnace	0.35	0.8	ng/dscm	0.438

PM	Group I furnace handling other than clean charge	0.184	0.4	lb/ton
0.460

	Group I furnace clean charge only	0.165	0.8	lb/ton	0.206

	Delacquering/decoating kiln	0.0390	0.3	lb/ton	0.130

	Scrap shredder	0.00757	0.01	gr/dscf	0.757

	Average	N/A	N/A	N/A	0.388

HCl	Group I furnace handling other than clean charge	0.0864	0.4	lb/ton
0.216

	Group I furnace handling only clean charge	0.144	0.4	lb/ton	0.360

	Delacquering/decoating kiln	0.259	1.5	lb/ton	0.173

	Average	N/A	N/A	N/A	0.266

THC	Delacquering/decoating kiln	0.0485	0.2	lb/ton	0.243

	Chip dryer	0.201	0.8	lb/ton	0.251



Table 9. Default Capacity Factors

Equipment	Capacity Factor 

(Actual production versus production capacity)

Group I furnace handling only clean charge	0.493

Group I furnace handling other than clean charge	0.467

Sweat Furnace	0.412

Delacquering/decoating kiln	0.370

Chip dryer	0.342

Scrap Shredder	0.317



	Average	0.400

Table 10. Allowable Emissions Example Calculations 

RTI Number	Pollutant	Equipment	Maximum Capacity (TPY)1

Conversion Factor2

HAP Concentration3

Allowable Emissions (TPY)

409	Antimony	Group 1 Furnace Handling Other than Clean Charge	32760	x
2.00E-04	x	18.6/1E+06	=	1.22E-04

409	HCl	Group 1 Furnace Handling Other than Clean Charge	32760	x
2.00E-04

	=	6.55

409	D/F as 2,3,7,8-TCDD TEQ	Group 1 Furnace Handling Other than Clean
Charge	32760	x	1.50E-11

	=	4.91E-07

276	Acrylonitrile	Thermal Chip Dryer	21600	x	1.00E-03	x	9.89E-04	=
2.14E-02

276	Acenaphthene	Thermal Chip Dryer	21600	x	1.00E-03	x	9.23E-06	=
1.99E-04

1 Maximum capacity values are from all-company ICR responses.

2 Conversion factors are from Table 7.

3 HAP concentrations are from nine-company testing ICR (see Table 4 for
metallic HAPs, and Table 5 for organic HAPs). 

Table 11. Actual Emissions Example Calculations 

RTI Number	Pollutant	Equipment	Allowable Emissions (TPY)1

Reported Emissions/ Limit2

Production/ Maximum Capacity3

Actual Emissions (TPY)

409	Antimony	Group 1 Furnace Handling Other than Clean Charge	1.22E-04	x
0.052/0.4	x	1235/32760	=	5.98E-07

409	HCl	Group 1 Furnace Handling Other than Clean Charge	6.55	x
0.037/0.4	x	1235/32760	=	2.28E-02

409	D/F as 2,3,7,8-TCDD TEQ	Group 1 Furnace Handling Other than Clean
Charge	4.91E-07	x	0.48/15	x	1235/32760	=	5.92E-10

276	Acrylonitrile	Thermal Chip Dryer	2.14E-02	x	0.022/0.8	x	6953/21600	=
1.89E-04

276	Acenaphthene	Thermal Chip Dryer	1.99E-04	x	0.022/0.8	x	6953/21600	=
1.76E-06

1 See Table 10 for allowable emissions.

2 Reported emissions are from ICR responses. Emissions limits are from
the standards (see Table 3). 

3 Production values for latest year are from the ICR responses. Maximum
production capacities are also from ICR responses. 

Table 12. Allowable and Actual D/F Emissions, Major Sources

RTI Number	Facility Name	TEQ Dioxin/Furan Emissions (TPY)



Allowable Emissions	Actual

 Emissions

120	Crestwood Metal Company	8.18E-09	4.86E-09

195A	Alcoa, Inc. (North plant)	2.17E-06	1.55E-08

195B	Alcoa, Inc. (South plant)	7.27E-06	6.47E-08

198	Novelis Corporation	5.99E-08	6.09E-12

199	Southwire Co	2.25E-06	2.25E-06

200	Aleris Rolled Products, Inc.	6.89E-06	6.94E-07

207	Alcoa Inc.	8.96E-06	7.24E-07

211	Hydro Aluminum Wells - Monett	1.49E-06	5.55E-08

224	JW Aluminum Company	4.92E-07	8.11E-08

228	Nichols Aluminum Casting	1.57E-05	1.29E-06

232	Aleris Recycling, Inc/Aleris Specification Alloys, Inc.	1.03E-06
2.66E-08

260	Aleris Specification Alloys, Inc.	5.51E-06	2.45E-07

261	Alcoa Inc. - Warrick Operations	3.45E-05	1.58E-07

269	Novelis Corporation	1.11E-05	1.14E-06

270	Alcoa Massena Operations (West Plant)	1.49E-06	9.47E-07

272	Alumax of SC, Incorporated	1.12E-06	5.63E-11

273	JW Aluminum Co	1.64E-06	3.14E-07

274	Aluminum Co. of America - Wenatchee Works	1.69E-06	9.66E-09

276	Mercury Marine - Fond Du Lac Complex	2.70E-08	3.55E-09

284	Alumax Mill Products, Inc.	1.39E-06	1.56E-07

288	Alumax Mill Products Inc.	6.75E-06	4.48E-07

289	Alcoa Mill Products - San Antonio	1.99E-06	1.04E-08

291	Sapa Extrusion	1.48E-06	7.30E-08

292	William L. Bonnell Co., Inc.	5.81E-07	3.06E-08

294	Novelis Corporation	5.18E-06	1.35E-06

298a	Wise Alloys LLC-Alloys Reclamation Plant	2.93E-06	7.02E-08

299	William L. Bonnell Company, Inc.(The)	8.75E-07	5.73E-09

303	Aleris Specifiation Alloys, Inc.	1.15E-06	8.02E-07

305	Reynolds Foil Inc, dba reynolds Consumer Products Company	2.22E-06
4.88E-12

324	Aleris Recycling	5.25E-07	1.09E-08

335	Jupiter Aluminum Corporation	2.01E-06	1.41E-08

336	Superior Aluminum Alloys	3.74E-06	9.08E-07

338	Recycling Services of Indiana	6.43E-07	1.95E-09

341	Aluminum Recovery Technologies, Inc.	8.66E-07	2.72E-13

344	J.L. French Corp	8.54E-07	1.06E-09

349	Aleris Recycling, Inc.	2.42E-06	3.54E-07

351	Logan Aluminum	8.99E-07	2.01E-12

352	Owl's Head Alloys, Inc	3.98E-07	2.22E-07

363	Aleris Recycling	8.40E-07	9.54E-09

375	Aluminum Shapes, L.L.C.	1.97E-06	7.61E-10

389	Aleris Recycling	2.64E-06	5.87E-07

395	Sapa Extrusions	2.66E-06	2.08E-06

409	Intalco Aluminum Corp Ferndale	2.46E-07	5.93E-10

415	J. L. French Corp.	1.98E-06	1.84E-07

416	J. L. French Corp.	3.01E-08	1.51E-08

421	Alcan Rolled Products, L.L.C. 	9.99E-06	1.58E-07

	Grand Total	1.54E-04	1.44E-05



Table 13. Allowable and Actual D/F Emissions, Area Sources

RTI Number	Facility Name	TEQ Dioxin/Furan Emissions (TPY)



Allowable

 Emissions	Actual

h

h

h

h

h	

hG

j;

h	

h	

h	

Ff

h	

h	

h	

Ffš

h	

h	

h	

h	

h	

Ffî

愀Ĥ摧烀

愀Ĥ摧烀

愀Ĥ摧烀

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧ᗶ*

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p̀

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

愀Ĥ摧㼡p

 

 



 

!

5.03E-08

329	KB Cores - Kankakee	1.11E-08	4.00E-09

339	Aleris Recycling - Wabash Operations	4.58E-07	6.16E-08

345	Kentucky Smelting Technology, Inc.	1.20E-06	3.41E-09

347	Hydro Aluminum - Louisville	9.74E-07	9.74E-07

348	Audubon Metals, L.L.C.	8.70E-09	7.21E-11

354	Electro Cycle, Inc.	7.58E-07	3.59E-09

364	Continental Aluminum	7.39E-07	2.67E-07

369	Most, Inc. - Troy	6.18E-07	1.04E-07

372	Taber Metals Gulfport L.P.	6.15E-07	2.48E-08

376	State Metal Industries, Inc.	5.60E-07	2.09E-07

381	Scepter Inc. - Seneca Falls Operations	4.60E-07	6.22E-08

384	GNW Aluminum, Inc.	3.89E-08	1.40E-08

385	Quantum Metals	3.93E-09	4.35E-10

392	Aleris Recycling, Inc.	7.88E-07	4.49E-07

394	Ritchey Metals Co., Inc. - Hendersonville Plant	4.50E-09	9.71E-10

398	Berman Brothers Iron & Metal 	4.28E-07	9.46E-08

401	Scepter, Inc.	7.88E-07	8.65E-08

404	Norandal USA, Inc.	3.38E-06	1.31E-07

405	Sapa Extrusions, Inc.	7.25E-07	1.05E-08

407	Aleris Rolled Products, Inc.	1.44E-06	1.35E-07

408	Kaiser Aluminum Washington	4.58E-06	6.45E-07

412	B & B Metals Processing Co.	1.33E-07	1.68E-09

420	Beck Aluminum Racine	3.94E-07	3.54E-10

422	Aleris Recycling, Inc.	4.86E-07	7.96E-08

423	Aleris Recycling Bens Run LLC	3.94E-07	4.47E-08

	Grand Total	4.28E-05	6.67E-06



  PAGE   \* MERGEFORMAT  27 

