	

Re: Fwd: quick questions about Ohio modeling coordinates

Sarah VanderWielen 

to:

Andy Chang

05/06/2010 11:42 AM

Cc:

"Hunter, Jennifer"

 

 







From:	"Sarah VanderWielen" <Sarah.VanderWielen@epa.state.oh.us>





	To:	Andy Chang/R5/USEPA/US@EPA





	Cc:	"Hunter, Jennifer" <Jennifer.Hunter@epa.state.oh.us>

	

Hi Andy, 

 

Ohio had double checked the facility coordinates and it appears that you
are correct.  Below is a corrected table with the correct coordinates
for each facility. 

 

Longitude	Latitude	Facility

-83.9726	40.29898	Quincy Castings, Inc

-83.7598	40.34411	Daido Metal Bellefountaine LLC

-83.9975	41.57508	Bunting Bearings, LLC

-84.2942	41.51237	Sauder Woodworking Cogeneration Facility

 

Sorry for the mix up. Please let us know if there is anything else. 

 

Thanks, 

 

Sarah 

>>> <Chang.Andy@epamail.epa.gov> 5/5/2010 12:28 PM >>>

Hi Jennifer, 

Had two quick questions for you about the modeling that was done for
Bellefontaine and Delta. 

This is a table that you all submitted for Bellefontaine.  Just wanted
to confirm that the coordinates of Quincy and Daido were reversed only
as typos.  (aka...the right sources and emissions were modeled, the
coordinates are just wrong in the table).   

Same type of questions for Delta: Bunting Bearings coordinates are off,
and it appears as if the coordinates listed in the table for Sauder are
actually for Bunting Bearings.  Can you let me know if the coordinates
are just typos?   

Thanks.  andy 

*************************************************************

Weian 'Andy' Chang

Environmental Engineer

US EPA Region 5

Air and Radiation Division

77 W. Jackson Blvd AR-18J

Chicago, IL 60604

312.886.0258 (direct)

312.697.2639 (fax)

