
[Federal Register Volume 79, Number 75 (Friday, April 18, 2014)]
[Notices]
[Pages 21916-21917]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-08918]



[[Page 21916]]

=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OAR-2007-1182; FRL-9909-76-OAR]


Proposed Information Collection Request; Comment Request; 
Emissions Certification and Compliance Requirements for Nonroad 
Compression-Ignition Engines and On-Highway Heavy Duty Engines

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency is planning to submit an 
information collection request (ICR), ``Emissions Certification and 
Compliance Requirements for Nonroad Compression-ignition Engines and 
On-highway Heavy Duty Engines'' (EPA ICR No. 1684.18, OMB Control No. 
2060-0287) to the Office of Management and Budget (OMB) for review and 
approval in accordance with the Paperwork Reduction Act (44 U.S.C. 3501 
et seq.). Before doing so, EPA is soliciting public comments on 
specific aspects of the proposed information collection as described 
below. This is a proposed extension and revision of the ICR, which is 
currently approved through August 31, 2014. An Agency may not conduct 
or sponsor and a person is not required to respond to a collection of 
information unless it displays a currently valid OMB control number.

DATES: Comments must be submitted on or before June 17, 2014.

ADDRESSES: Submit your comments, referencing Docket ID No. EPA-HQ-OAR-
2007-1182, online using www.regulations.gov (our preferred method), by 
email to a-and-r-Docket@epa.gov, or by mail to: EPA Docket Center, 
Environmental Protection Agency, Mail Code 28221T, 1200 Pennsylvania 
Ave. NW., Washington, DC 20460.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI) or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Nydia Yanira Reyes-Morales, 
Environmental Protection Agency, 1200 Pennsylvania Avenue NW., Mail 
Code 6403J, Washington, DC 20460; telephone number: 202-343-9264; fax 
number: 202-343-2804; email address: reyes-morales.nydia@epa.gov.

SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail 
the information that the EPA will be collecting are available in the 
public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, EPA West, 
Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit http://www.epa.gov/dockets.
    Pursuant to section 3506(c)(2)(A) of the PRA, EPA is soliciting 
comments and information to enable it to: (i) Evaluate whether the 
proposed collection of information is necessary for the proper 
performance of the functions of the Agency, including whether the 
information will have practical utility; (ii) evaluate the accuracy of 
the Agency's estimate of the burden of the proposed collection of 
information, including the validity of the methodology and assumptions 
used; (iii) enhance the quality, utility, and clarity of the 
information to be collected; and (iv) minimize the burden of the 
collection of information on those who are to respond, including 
through the use of appropriate automated electronic, mechanical, or 
other technological collection techniques or other forms of information 
technology, e.g., permitting electronic submission of responses. EPA 
will consider the comments received and amend the ICR as appropriate. 
The final ICR package will then be submitted to OMB for review and 
approval. At that time, EPA will issue another Federal Register notice 
to announce the submission of the ICR to OMB and the opportunity to 
submit additional comments to OMB.
    Abstract: For this ICR, EPA is seeking a revision to an existing 
package with a three year extension. Under ICR 1684.18, EPA collects 
information regarding heavy-duty on-highway engines and vehicles, 
nonroad compression-ignition engines, and categories 1 and 2 marine 
compression-ignition engines (collectively referred to here as 
``engines'' for simplicity). Please note that category 3 marine engines 
and locomotives are covered under separate ICRs.
    Title II of the Clean Air Act, (42 U.S.C. 7521 et seq.; CAA), 
charges the Environmental Protection Agency (EPA) with issuing 
certificates of conformity for those engines that comply with 
applicable emission standards. Such a certificate must be issued before 
engines may be legally introduced into commerce. The information 
collected is necessary to (1) issue certificates of compliance with 
emissions standards and requirements; and (2) verify compliance with 
various programs and regulatory provisions. To apply for a certificate 
of conformity, manufacturers are required to submit descriptions of 
their planned production engines, including detailed descriptions of 
emission control systems and test data. This information is organized 
by ``engine family'' groups. Engines within an engine family are 
expected to have similar emission characteristics.
    The emission values achieved during certification testing may also 
be used in the Averaging, Banking, and Trading (ABT) Program. The 
program allows engine manufacturers to bank credits for engine families 
that emit below the standard and use the credits to certify engine 
families that emit above the standard. They may also trade banked 
credits with other manufacturers. Participation in the ABT program is 
voluntary.
    The CAA also mandates EPA to verify that manufacturers have 
successfully translated their certified prototypes into mass produced 
engines; and that these engines comply with emission standards 
throughout their useful lives. EPA verifies this through `Compliance 
Programs' which include Production Line Testing (PLT), In-use Testing 
and Selected Enforcement Audits, (SEAs). Not all programs apply to all 
industries included in this ICR. PLT, which only applies to marine 
engines, is a self-audit program that allows engine manufacturers to 
monitor their products' emissions profile with statistical certainty 
and minimize the cost of correcting errors through early detection. In-
use testing allows manufacturers and EPA to verify compliance with 
emission standards throughout an engine family's useful life. Through 
SEAs, EPA verifies that test data submitted by engine manufacturers is 
reliable and testing is performed according to EPA regulations.
    There are varying recordkeeping and labeling requirements under all 
certification and compliance programs.
    In this notice, former ICR 1826.05 (``Transition Program for 
Equipment Manufacturers (TPEM)'', OMB Control Number 2060-0369) is 
being incorporated into ICR 1684.18. This action is undertaken to 
consolidate compliance information requirements for nonroad compression 
ignition engines and equipment under a single ICR for simplification. 
With this consolidation, we combine most of the certification and 
compliance burden associated with the nonroad compression-ignition 
engine and equipment industries. Under TPEM,

[[Page 21917]]

nonroad equipment manufacturers are allowed to delay compliance with 
Tier 4 standards for up to seven years as long as they comply with 
certain limitations. The program seeks to ease the impact of new 
emission standards on equipment manufacturers. This is achieved by 
allowing additional time for equipment manufacturers to redesign their 
products as needed in response to changes in engine designs. 
Participation in the program is voluntary. Participating equipment 
manufacturers and the engine manufacturers who provide TPEM engines are 
required to keep records and submit annual reports.
    The information requested is collected by the Diesel Engine 
Compliance Center (DECC), Compliance Division (CD), Office of 
Transportation and Air Quality, Office of Air and Radiation, EPA. DECC 
uses this information to ensure that manufacturers are in compliance 
with applicable regulations and the CAA. The information may also be 
used by EPA's Office of Enforcement and Compliance Assurance and the 
Department of Justice for enforcement purposes. Most of the information 
is collected in electronic format and stored in CD's databases.
    Manufacturers are allowed to assert a claim of confidentiality over 
information provided to EPA. Confidentiality is granted in accordance 
with the Freedom of Information Act and EPA regulations at 40 CFR Part 
2. Non-confidential information may be disclosed on OTAQ's Web site or 
upon request under the Freedom of Information Act to trade 
associations, environmental groups, and the public.
    Form Numbers: See Table 1 below.

  Table 1--List of Forms Used To Collect Information Under ICR 1684.18
------------------------------------------------------------------------
                 Form                                  No.
------------------------------------------------------------------------
HD/NR Engine Manufacturer Annual        5900-90.
 Production Report.
AB&T Report for Heavy-duty On-highway   5900-134.
 Engines.
AB&T Report for Nonroad Compression     5900-125.
 Ignition Engines.
AB&T Report for Marine Compression-     Number in process.
 ignition Engines.
PLT Report for Marine CI CumSum.......  5900-297.
PLT Report for Marine CI Non-CumSum...  5900-298.
TPEM Equipment Manufacturer             5900-242.
 Notification.
TPEM Equipment Manufacturer Report....  5900-240.
TPEM Engine Manufacturer Report.......  5900-241.
TPEM Bond Worksheet...................  5900-239.
Marine CI Application for               5900-124.
 Certification.
------------------------------------------------------------------------

    Respondents/affected entities: Entities potentially affected by 
this action are manufacturers of nonroad compression ignition (CI) 
engines, marine CI engines and on-highway heavy-duty engines; owners of 
heavy-duty truck fleets, and manufacturers of nonroad compression 
ignition equipment.
    Respondent's obligation to respond: Engine manufacturers must 
respond to this collection if they wish to sell their products in the 
U.S., as prescribed by Section 206(a) of the CAA (42 U.S.C. 7521). 
Participation in ABT is voluntary, but once a manufacturer has elected 
to participate, it must submit the required information. Likewise, 
participation in TPEM is voluntary, but once an engine or equipment 
manufacturer chooses to participate, it must submit the required 
notifications and annual reports (40 CFR 1039.625 and 1039.626). If 
applicable to a particular engine family, compliance programs reporting 
is mandatory.
    Estimated number of respondents: 2,350 (total).
    Frequency of response: Annual, quarterly, on occasion.
    Total estimated burden: 244,287 hours (per year). Burden is defined 
at 5 CFR 1320.03(b).
    Total estimated cost: $34,470,029 (per year), includes $13,752,082 
annualized capital or operation & maintenance costs.
    Changes in Estimates: There is an increase of 70,101 hours in the 
total estimated respondent burden compared with the ICR currently 
approved by OMB. This increase is due to (1) the merger of ICRs 1684.18 
and 1826.05, and (2) an increase in the number of respondents. Please 
note that these are preliminary estimates. EPA is still evaluating 
information that could lead to a change, likely an increase, in these 
estimates.

    Dated: April 11, 2014.
Byron J. Bunker,
Director, Compliance Division, Office of Transportation and Air 
Quality, Office of Air and Radiation.
[FR Doc. 2014-08918 Filed 4-17-14; 8:45 am]
BILLING CODE 6560-50-P


