Supporting Statement for the

Control Technology Determinations for Constructed and 

Reconstructed Major Sources of Hazardous Air Pollutants,

40 CFR part 63, subpart B

	Prepared by

	Office of Air Quality Planning and Standards

	May 2008

	Part A of the Supporting Statement

1.	IDENTIFICATION OF THE INFORMATION COLLECTION

1(a)	Title of the Information Collection

This Information Collection Request (ICR) is entitled “Control
Technology Determinations for Constructed and Reconstructed Major
Sources of Hazardous Air Pollutants, 40 CFR part 63, subpart B” and
numbered as EPA ICR Number 1658.05 and Office of Management and Budget
(OMB) Control Number 2060-0373.  This is a revision of the OMB-approved
EPA ICR Number 1658.04.

1(b)	Short Characterization

Section 112(g)(2)(B) of the Clean Air Act as amended in 1990 (CAA)
requires that maximum achievable control technology (MACT) standards be
met by constructed or reconstructed major sources of hazardous air
pollutants (HAP).  Where no applicable emission limit has been set, the
MACT determination shall be made on a case-by-case basis.

This ICR supports the regulations at 40 CFR part 63, subpart B (sections
63.40 – 63.44) to implement section 112(g).  It addresses the
information collection burden (hours and costs) to three parties:  (1)
industry respondents subject to these provisions, (2) State, local, and
Tribal agencies that review applications made under these provisions,
and (3) EPA for oversight review of a percentage of State/local
decisions.  The information collection activities for which burden
estimates are calculated are summarized below.

Owners or operators who construct or reconstruct a major source of HAP
emissions must comply with any applicable MACT standard.  Where no MACT
standard exists, a case-by-case determination of MACT ((case-by-case
MACT() under CAA section 112(g) must be made.  The owner or operator is
responsible for obtaining such a case-by-case MACT determination.  This
ICR contains supporting information for case-by-case MACT
determinations.

State, local, and Tribal agencies with operating permit programs that
have been approved by EPA will review applications submitted by sources
under the CAA section 112(g) provisions.  These permitting agencies must
determine the level of control that will be necessary to meet
case-by-case MACT requirements for new sources.  Finally, EPA will
review a percentage of the determinations in order to provide oversight
of the various State, local, and Tribal permitting authorities.

2.	NEED FOR AND USE OF THE COLLECTION

2(a)	Need / Authority for the Collection

The information is needed and used to determine if the entity submitting
an application for a case-by-case MACT determination has met the
criteria established in the CAA section 112(g) rule.  This information
is necessary for the State or local agency to make the case-by-case
determination.  Finally, this information is needed by the Administrator
to review a portion of the case-by-case determinations to ensure that
the program is functioning as intended.

The need and authority for this information collection is contained in
CAA section 112(g) 42 U.S.C. 7401 (et seq.) as amended by Pub. L.
101-549].

2(b)	Practical Utility / Users of the Data

The information collected in the CAA section 112(g) applications
provides (for the purposes of compliance determination) documentation of
the selection of a particular control technology for case-by-case MACT. 
Applications are reviewed by a State or local agency for which authority
has been delegated by EPA to make the requisite determinations.  In
addition, EPA will review some applications as an oversight function.

3.	NONDUPLICATION, CONSULTATIONS, AND OTHER COLLECTION CRITERIA

3(a)	Nonduplication

This information collection is not unnecessarily duplicative of
information otherwise reasonably accessible to us.  For instances where
other information items (e.g., a site plan) may have been previously
collected from source owners or operators by the permitting authority in
support of other applications, it is possible to use this information to
meet all or part of the requirements of this information collection.  In
general, however, most items of information are tailored specifically
for the individual case-by-case MACT determinations, meaning that
previously submitted information is likely to be inadequate for CAA
section 112(g) purposes.

3(b)	Public Notice Required Prior to ICR Submission to OMB

We solicited public comments on this ICR prior to submitting it to OMB. 
We issued a Federal Register notice requesting comments on the ICR
renewal on ________.  We received _____ comment letters.

3(c)	Consultations

The final rule for subpart B was issued on December 27, 1996 (61 FR
68384).  Since then, we have gained extensive experience in working with
the State and local agencies in developing case-by-case MACT
determinations for sources subject to CAA section 112(g).  We have
consulted with knowledgeable State agency staff who have been involved
in making case-by-case MACT determinations over the past 3 years and
potential industry respondents.  We used this information to prepare
this ICR renewal package.

In general, the State contacts confirmed that there has been a low level
of activity related to CAA section 112(g) applications over the last few
years and that most of the applications were for major sources that were
eventually subject to CAA section 112(d) MACT standards or for sources
that ended up taking enforceable permit limits to keep their emissions
below the CAA section 112(g) applicability threshold (i.e., major source
status).  They confirmed that the relative burden hours for the State
review of these applications was on average reasonable.  They also
reported that there were no major concerns related to the burden
associated with the section CAA 112(g) requirements by the permit
applicants they worked with.  The industry contact raised no major
issues with the hourly burden estimate at this point.

The following table lists the contact information of the people we
consulted.

Name	Agency	Phone Number

James Geier	Colorado Department of Public Health and Environment
303/692/3167

Joseph Eller	South Carolina Department of Health and Environmental
Control	803/898-4079

Cindy Phillips	Florida Department of Environmental Protection
850/921-9534

Brian Toth	Southern Company	205/257-7440



3(d)	Effects of Less Frequent Collection

This section does not apply because the information required to be
submitted by each applicant would be submitted on a one-time-only basis.

3(e)	General Guidelines

None of the general information collection guidelines in 5 CFR
1230.5(d)(2) of the OMB regulations implementing the Paperwork Reduction
Act is being exceeded in the CAA section 112(g) regulations.

3(f)	Confidentiality

All information submitted to us for which a claim of confidentiality is
made will be safeguarded according to the policies set forth in Title
40, Chapter 1, part 2, subpart B, Confidentiality of Business
Information.  See 40 CFR; 41 FR 36902, September 1, 1976; amended by 43
FR 3999, September 8, 1978; 43 FR 42251, September 28, 1978; and 44 FR
17674, March 23, 1979.  Even where we have determined that data received
in response to an ICR is eligible for confidential treatment under 40
CFR part 2, subpart B, we may nonetheless disclose the information if it
is “relevant in any proceeding” under the statute [42 U.S.C.
7414(c); 40 CFR 2.301(g)].  The information collection complies with the
Privacy Act of 1974 and OMB Circular 108.

3(g)	Sensitive Questions

This section is not applicable.  This ICR does not contain any sensitive
questions relating to sexuality, religious beliefs, or other matters
usually considered private.

4.	THE RESPONDENTS AND THE INFORMATION REQUESTED

4(a)	Respondents / SIC Codes

Respondents include owners/operators of constructed or reconstructed
major sources of HAP where no applicable MACT emission limit has been
set.  The section 112(g) regulations define “construct a major
source” and “reconstruct a major source” at 40 CFR 63.41 (also see
Section 6(a)(i) of this document).  A major source is defined as one
that emits more than 10 tons per year of any HAP, 25 tons per year for a
combination of all HAP, or amounts exceeding any lesser quantity cutoff
established under 40 CFR part 63.  This definition of major source cuts
across a wide variety of industries, including both manufacturing and
non-manufacturing sources.  See Attachment 1 for a list of potentially
affected industry sectors; this list is not exhaustive but provides a
good idea of the types of source categories that could be affected. 
Potentially affected sources also include those formerly subject to the
now-vacated MACT standards for polyvinyl chloride and copolymers
production; brick and structural clay products manufacturing; clay
ceramics manufacturing; and industrial, commercial, and institutional
boilers and process heaters.  Also potentially affected are electric
utility steam generating units (EGUs).  EGUs were added to the section
112(c) source category list in December 15, 2000 and became subject to
section 112(g) at that time.  (See 40 CFR 63.40(c).)   EPA removed EGUs
from the source category list in a rule published on March 29, 2005. 
However, On Feb. 8, 2008, the United States Court of Appeals for the
District of Columbia Circuit vacated that rule. (State of New Jersey v.
EPA, No. 05-1097) and thus EGUs are a listed source category and section
112(g) applies.   Once EPA promulgates national MACT standards for a
source category, CAA section 112(g) no longer applies to sources in that
source category.

Respondents also include State, local and tribal agencies that  make the
case-by-case MACT determinations.  These government establishments are
classified as Air and Water Resource and Solid Waste Management Programs
under Standard Industrial Classification (SIC) code 9511 and North
American Industry Classification System (NAICS) code 92411.

4(b)	Information Requested

(i)	Data Items, Including Recordkeeping Requirements

All items addressed in this ICR involve information submitted with the
application.  There are no recordkeeping requirements per se, although
some of the information necessary to document control options would
require the source to have kept records of certain information.  The
data items for the CAA section 112(g) rule consist of the following:

Actual Emissions.  Sources complying with the requirements of CAA
section 112(g) under the case-by-case MACT provisions (i.e., constructed
and reconstructed major sources) generally do not have to provide
detailed analytic determinations of individual HAP if the owner/operator
agrees that the HAP emissions will exceed major source thresholds that
will subject the construction or reconstruction to the CAA section
112(g) requirements.  Rather, the source needs only to identify and
quantify classes and types of pollutants to a sufficient degree to
support the MACT evaluation.

Case-by-Case MACT Determination.  The source owner or operator must
submit the following information when it performs a case-by-case MACT
determination [40 CFR 63.43(e)]:

The name and address (physical location) of the major source and
affected source(s) undergoing construction or reconstruction

A brief description of the major source, its source category or
subcategory, and a description of the affected stationary source(s)
requiring a MACT determination

The expected commencement date of the construction or reconstruction of
the affected source

The expected completion date of the construction or reconstruction of
the affected sources

The anticipated date of start-up

The type of HAP emitted by each emission unit and the emission rate for
each HAP

Any federally-enforceable emission limitations applicable to the
MACT-affected emissions units

The maximum capacity and expected utilization, and associated
uncontrolled emission rates, for the MACT-affected emissions units
(potential to emit in an uncontrolled state)

Controlled emissions for the MACT-affected emission unit in tons per
year (potential to emit in a controlled state)

A recommended emission limitation for the MACT-affected emission unit
that complies with all relevant emission standards

If the application specifies additional control technology or a change
in control technologies, the application must include:

The candidate control technology to meet the emission limitation
including technical information on the design, operation, size,
estimated control efficiency, etc.

Supporting documentation including identification of alternative control
technologies considered to meet the emission limitation, and an analysis
of non-air quality health environmental impacts or energy requirements
for the selected MACT candidate

Any other information which may be required pursuant to 40 CFR part 63,
subpart A.

	(ii) Respondent Activities.

Activities that the owner or operator must perform are listed in this
section.

Read applicable regulations to determine compliance requirements

Assemble necessary source information, including source identification
and descriptive information, construction schedules, sufficient data on
classes and types of pollutants to support the MACT evaluations, and
potential to emit (controlled and uncontrolled)

Identify and describe MACT candidate, any required MACT limits, expected
emissions limitation, and MACT installation schedule

Prepare and submit application

Revise application per comments received from the permitting authority,
ensuring compliance with case-by-case MACT decision.

The permitting authority, typically the State, local  or Tribal air
agency, will perform the following activities:

Answer respondent questions

Log in and review applications

Request additional information for incomplete applications

When no MACT standard has been promulgated, verify that the source will
achieve the level of control necessary to meet case-by-case MACT
requirements for constructed or reconstructed sources

Inform source of permitting authority(s decision regarding the
application.

5.	THE INFORMATION COLLECTED -- AGENCY ACTIVITIES, COLLECTION
METHODOLOGY, AND INFORMATION MANAGEMENT

5(a)	Agency Activities

In carrying out its oversight role, EPA will review the decision of the
permitting authority.

5(b)	Collection Methodology and Management

It will be the responsibility of the owners or operators of the
constructed or reconstructed major sources affected by these regulations
to submit an application to the permitting authority.  Applications will
be prepared and submitted according to guidance issued in conjunction
with the CAA section 112(g) rules.  No forms are contained in the
regulations for CAA section 112(g) applications.

The permitting authority will determine how to log in and track
applications.  MACT determinations are performed on a case-by-case
basis.  It will also be the responsibility of the permitting authority
to provide EPA with the information necessary for oversight review.

For each application, the applicant will be required to supply
information on how the data were obtained (e.g., indicate whether the
emissions data were obtained through the use of emission factors or test
data) and how calculations were performed.  Qualified staff at the
permitting authority will check the quality of data submitted by the
applicant on a case-by-case basis.  This will be done by reviewing
control technology determinations for similar sources, by reviewing test
data, and by checking engineering calculations.  Confidential
information submitted by the applicant will be handled by the permitting
authority in conformance with confidential information handling
procedures.  No specific provisions have been made for electronic
methods of submittal.

The CAA section 112(g) regulations will not require the request of
information through any type of survey.

5(c)	Small Entity Flexibility

Minimizing the information collection burden for all sizes of
organizations is a continuing principle for our efforts.  The CAA
section 112(g) regulations only include the application, recordkeeping
and reporting requirements we need to determine compliance with the
rule.  We have reduced the collection burden to the extent practicable
and appropriate, including consideration of the resources available to
the respondents and clarifying, consolidating, and simplifying the
requirements.  Furthermore, we do not anticipate that any small entities
will be participating in this program.

5(d)	Collection Schedule

Each source affected by the CAA section 112(g) regulations will be
required to submit an application.  Preparation of the application in
compliance with the CAA section 112(g) rules is a one-time-only activity
(i.e., once for each construction or reconstruction subject to the CAA
section 112(g) provisions).  The CAA section 112(g) regulations will not
require periodic reporting or surveys.

6.	ESTIMATING THE BURDEN AND COST OF THE COLLECTION

6(a)	Estimating Respondent Burden

(i)	Estimating Industry Burden

Respondents include owners/operators of major sources of HAP, for which
no MACT standard is in effect, that undertake construction or
reconstruction.  To construct a major source means generally to
fabricate, erect, or install at any “greenfield” site a major source
of HAP, or to fabricate, erect, or install at any developed site a new
process or production unit which in and of itself is a major source (40
CFR 63.41).  To reconstruct a major source means to replace components
of an existing process or production unit that in and of itself is a
major source of HAP to the extent that the fixed capital costs of the
replacement components exceeds 50 percent of the fixed capital cost that
would be required to  construct a comparable process or production unit,
and it is technically and economically feasible for the reconstructed
major source to meet the applicable MACT emission limitation of new
sources established under the CAA section 112(g) regulations.  (id.)  In
calculating the burden hours for this ICR, we made assumptions about the
number of sources that would submit applications each year.    As
discussed in more detail in Section 6(d), Estimating the Respondent
Universe and Total Burden Costs, we have conservatively estimated that
there could be about 73 sources affected by CAA section 112(g) over the
next 3 years.

We retained the same activities and burden hour estimates per respondent
used in the previous ICR (ICR Number 1658.04).  Based on our
consultations, we did not identify any concerns that the burden hours
associated with preparing an application are understated.  Contacts
noted that these sources are often also complying with New Source Review
requirements and other State preconstruction permitting as well.  The
additional information needed that is unique to the CAA section 112(g)
application is an estimate of HAP emissions.

The total hours associated with preparing the application in Table 1 are
for technical hours only.  Consistent with previous ICRs, we calculated
management hours as 5 percent of technical hours and clerical hours as
10 percent of technical hours.  Table 4 contains the results of the
burden hours calculation for each activity during each year of this ICR.
 Overall, the CAA section 112(g) regulations contain an average burden
of 4,198 hours per year.

(ii)	Estimating State, Local, and Tribal Agency Burden

The estimated number of State, local, and Tribal agency respondents is
equal to the number of estimated permit applications.  We retained the
same activities and burden hour estimates per respondent used in the
previous ICR (ICR Number 1658.04).  Based on our consultations, we
determined that the previous estimate of 80 technical hours per
application is a reasonable average estimate.  Some applications might
be more complex and take more hours, but others would be similar to
other sources and/or MACT standards or represent simple scenarios and
would take fewer hours.

The total hours associated with preparing the application in Table 2 are
for technical hours only.  Consistent with previous ICRs, we calculated
management hours as 5 percent of technical hours and clerical hours as
10 percent of technical hours.  Table 4 contains the results of the
burden hours calculation for each activity during each year of this ICR.
 Overall, the CAA section 112(g) regulations contain an average burden
of 2,239 hours per year for State, local, and Tribal agencies.

6(b)	Estimating Respondent Costs

(i)	Estimating Industry Costs

Wage rates were based on May 2006 raw labor rates for the Manufacturing
Sector (NAICS 31 thru 34), loaded using an overhead factor of 110
percent, and indexed to June 2007 using the Employment Cost Index.  The
resulting rates are $115.12 for management personnel, $77.77 for
technical personnel, and $30.58 for clerical personnel.  These values
were taken from the Bureau of Labor Statistics (BLS) Occupational
Employment Statistics Survey website and reflect the latest values
available (May 2006).  The Employment Cost Index is located at:
http://www.bls.gov/news.release/eci.t02.htm.  Table 1 provides a
breakdown of labor hours and associated costs per occurrence for each
activity in each part of the application process for affected sources.

The respondent labor costs are found by multiplying the burden hours
associated with each activity by the hourly rate associated with each
labor type.  In total, the CAA section 112(g) regulations contain an
average labor cost of $316,031 per year.  Table 4 contains the results
of the calculation of labor costs for the respondents.

This ICR does not require any capital or start-up costs for equipment,
machinery, and construction.

Industry applicants submitting CAA section 112(g) applications for
case-by-case MACT determinations must transmit their findings to the
delegated State, local, and Tribal agency, which results in photocopying
and postage costs.  We determined that two types of documents would be
both copied and mailed:  2-ounce letters and 1-pound packages.  The
2-ounce letter would contain 5 pages, and the 1-pound package would
contain 200 pages.  Based on the typical price to copy a page, we used
$0.05 a page as our price per unit cost of copying.  The cost for
mailing a 2-ounce letter and 1-pound package via the United States
Postal Service in Spring 2008 is $0.58 and $4.50, respectively.  We also
assumed that a total of three copies would be made for each letter or
package.  We estimate that each applicant will submit one package (the
permit application) and one letter (response to questions).  Table 5
summarizes the total copying and mailing costs per year.  For industry
respondents, the average cost for copying and postage is $872 per year. 
Therefore, the average total cost to respondents, including labor cost
and copying/postage cost, is $316,903 per year.  Table 6 shows this
breakdown by year.

(ii)	Estimating State, Local, and Tribal Agency Costs

The activities for State, local, and Tribal agencies are divided into
the activities that would take place for the application process as
shown in Table 2.  Wage rates for State, local, and Tribal employees
were retrieved from the BLS website (  HYPERLINK
(http://stats.bls.gov/news.release/archives/ecec_09202007.pdf
http://stats.bls.gov/news.release/archives/ecec_09202007.pdf , Table 4. 
Employer costs per hour worked for employee compensation and costs as a
percent of total compensation:  State and local government workers, by
occupational group and full-time and part-time status, June 2007) and
are as follows:  $33.11 per hour for management labor, $33.22 per hour
for technical labor, and $16.39 per hour for clerical labor.  We added
in the value of total benefits in BLS Table 4.  We chose 20 percent of
the base rate as the percentage of salary that constitutes overhead. 
The addition of benefits and overhead to the hourly rate produces a pay
rate that reflects the true cost to employ a State, Local, or Tribal
agency worker.  Following is a summary of the computed hourly wages for
State, Local, and Tribal agency employees.

 Hourly Labor Rates for State, Local, and Tribal Respondents

Labor Type	Hourly Rate	Benefits

	Overhead

(20 % Salary)	Adjusted Hourly Rate

Management	$33.11	$14.18	$6.62	$53.91

Technical	$33.22	$13.79	$6.64	$53.65

Clerical	$16.39	$10.21	$3.28	$29.88



The State and local labor costs are found by multiplying the burden
hours associated with each activity by the hourly rate associated with
each labor type.  In total, the CAA section 112(g) regulations contain
an average labor cost of $115,503 per year.  Table 4 contains the
results of the calculation of labor costs for the State and local
agencies.

This ICR does not require any capital or start-up costs for equipment,
machinery, and construction.

State, local, and Tribal agencies responding to applications for
case-by-case MACT determinations must transmit their findings to the
applicant, which results in photocopying and postage costs.  Copying and
postage costs were calculated in the same manner as described above.  We
estimate that each State, local, and Tribal agency responding to an
application will send three letters (receipt of complete application
and/or notice of additional information, notice of MACT approval to
source, notice of MACT approval to EPA).  Table 5 summarizes the total
copying and mailing costs per year.  For State, local, and Tribal
agencies, the total average cost for copying and postage is $97 per
year.  Therefore, the average total cost to respondents, including labor
cost and copying/postage cost is $115,600 per year.  Table 6 shows this
breakdown by year.

6(c)	Estimating Agency Burden and Costs

Under the CAA section 112(g) regulations, we serve as in an oversight
capacity and audit approximately 10 percent of all applications
processed by State, local, Tribal agencies, for an average of about 2 to
3 applications per year.  In reviewing and evaluating these
applications, we will carry out the activities listed in section 5(a) of
this ICR.  We retained the same activities and burden hour estimates
used in the previous ICR (ICR Number 1658.04).

Managerial activities are considered 5 percent of the technical hours
while clerical activities are considered 10 percent of the technical
hours.  Table 4 contains the results of the burden hours calculation for
each activity during each year of this ICR.  Overall, the section CAA
112(g) regulations contain an average burden of 84 hours per year for
EPA.

We calculated the hourly rates for EPA employees using information on
annual salaries from the Internet site for the Office of Personnel
Management (  HYPERLINK "http://www.opm.gov/oca/08tables/pdf/RUS.pdf" 
http://www.opm.gov/oca/08tables/pdf/RUS.pdf ; January 2008).  We used
the appropriate pay grade levels for management, technical, and clerical
personnel.  We divided the annual pay rate by 2080, the amount of
working hours during a calendar year, to get the hourly wage rate.  We
then multiplied this rate by 1.6 to produce a pay rate that reflects the
true cost to the Federal government to employ a worker.  The value of
1.6 incorporates the addition of benefits at 40 percent of salary and
the addition of overhead at 20 percent of salary to the hourly rate. 
Following is a summary of the computed wages for EPA personnel.

 Hourly Labor Rates for EPA

Labor Type	Pay Grade	Annual Salary	Hourly Rate	Benefits

(40 % Salary)	Overhead

(20 % Salary)	Adjusted Hourly Rate

Management	GS-15	$107,962	$51.90	$20.76	$10.38	$83.04

Technical	GS-12	$65,315	$31.40	$12.56	$6.28	$50.24

Clerical	GS-6	$33,135	$15.93	$6.37	$3.19	$25.49



The EPA labor costs are found by multiplying the burden hours associated
with each activity by the hourly rate associated with each labor type. 
As shown in Table 4, the average labor cost for the EPA is $4,157
dollars per year.  Copying and postal costs for the EPA were calculated
in the same manner as described in the section 6(b).  We estimate that
EPA will send two letters (questions on the MACT determination, final
review results).  Table 5 presents the total EPA copying and postal
costs.  EPA would spend an annual average of $7 on copying and postage. 
The total cost for EPA, including labor and copying/postal costs, would
be an average of $4,163 per year as shown in Table 6.

6(d)	Estimating the Respondent Universe and Total Burden Costs

All of the CAA section 112(d) standards for listed categories have been
promulgated, with the exception of subpart UUUUU, Electric Utility Steam
Generating Units.  In addition, the MACT standards for the source
categories of polyvinyl chloride and copolymers production; brick and
structural clay products manufacturing; clay ceramics manufacturing; and
industrial, commercial, and institutional boilers and process heaters
have been vacated and are now subject to CAA section 112(g).  We have
estimated the potential universe of sources that could be subject to CAA
section 112(g).

Based on our consultations as described in section 3(c), we learned that
a small proportion of facilities have submitted CAA section 112(g)
applications, even in past years when the universe of potentially
affected sources was larger and included those for which a MACT standard
was planned, but not yet final.  Our State contacts estimated that an
average of 1 to 3 applications per year were actually processed in the
previously approved ICR.  Most of these were for listed source
categories for which no MACT standard had yet been issued.  Therefore,
based only on that estimate, the number of applications would have
decreased in the next ICR clearance period.  In the previous ICR, we
assumed two determinations per year per State.  Consultations for this
draft ICR have identified only 3 section 112(g) determination in 5 EPA
regions over the last 3 years.  Prorating this to all 10 EPA regions
would yield 6 determinations over the last 3 years, or 2 per year.  This
determination represents any major source not included in a source
category listed on the source category list.

However, we are also adding in a number of electric utility steam
generating units (EGUs).  EGUs were added to the section 112(c) source
category list in December 15, 2000 and became subject to section 112(g)
at that time. (See 40 CFR 63.40(c).)   EPA removed EGUs from the source
category list in a rule published on March 29, 2005.  However, On Feb.
8, 2008, the United States Court of Appeals for the District of Columbia
Circuit vacated that rule. (State of New Jersey v. EPA, No. 05-1097) and
thus EGUs are a listed source category and 112(g) applies.  Based on a
review of applications for electric utility steam generation units, we
estimate about  67 EGUs may be subject to section 112(g) determinations
over the next 3 years.  Our estimate may be overly conservative because
there may be issues with respect to applicability of section 112(g) to
certain utilities that we have included in our estimate.

Although sources in the source categories of polyvinyl chloride and
copolymers production; brick and structural clay products manufacturing;
clay ceramics manufacturing; and industrial, commercial, and
institutional boilers and process heaters are potentially subject to
section 112(g) due to the MACT standards vacaturs, we are not aware of
any new or reconstructed major sources over the next 3 years in those
categories that would trigger section 112(g).  

Thus, we have assumed that 2 unspecified major sources will file section
112(g) permit applications per year, plus 67 EGUs over the next 3 years,
for a total of 73 permit applications over the next 3 years.  This
estimate may become smaller if the electric utility MACT is promulgated
or the vacated MACT standards are re-promulgated before the end of 3
years.

We also assume 73 State, local, and agency respondents over the next
three years to review the permit applications, for a total of about 146
respondents.

As shown in Table 4, the total respondent burden is 19,310 hours.  As
shown in Table 6, the total respondent cost is $1,297,510.

6(e)	Bottom Line Burden Hours and Cost

(i)	Respondent Tally

Over the 3-year period of this ICR, the total average annual burden and
labor cost for the respondents resulting from the CAA section 112(g)
regulations are 6,437 hours and $431,534, respectively (see Table 4). 
There are no capital start-up costs associated with this collection. 
Operation and maintenance costs result from photocopying and postage
expenses, which are a total of $969 per year (see Table 5).  The total
average annual cost to respondents is $432,503 (see Table 6).

(ii)	Agency Tally

Over the 3-year period of this ICR, the total average annual burden and
labor cost for EPA is 84 and $4,157, respectively (see Table 4). 
Operation and maintenance costs result from photocopying and postage
expenses, which are a total of $7 per year (see Table 5).  The total
average annual cost to EPA is $4,163 (see Table 6).

6(f)	Reasons for Change in Burden

The currently approved reporting and recordkeeping hour burden, based on
ICR Number 1658.04, is 36,800 hours per year.  We are requesting a
decrease in burden to 6,437 hours per year.  The difference, 30,363
hours, is due to a program adjustment.  The following discussion
explains these changes.

Primarily, the change in burden is due to completion of setting MACT
standards for the source category list (with the exception of the
vacaturs and EGUs).  Therefore, our revised estimate of burden is
smaller than that estimated in the last ICR.

We are also requesting a decrease in the reporting and recordkeeping
cost burden due to the decrease of photocopying and postage costs for
the CAA section 112(g) applications as part of annual operation and
maintenance (O&M) costs.  Our assumptions for copying and postage costs
are discussed in section 6(b).  The total annual copying and postage
costs for respondents is $969, a decrease from the previous estimate of
$3,930 per year.

6(g)	Burden Statement

This estimate includes all activities associated with this ICR. 
Overall, the CAA section 112(g) program will have the following total
average annual burden:  6,437 hours and $432,503 (total costs) for the
respondents and 84 hours and $4,163 (total costs) for the EPA.  Tables
4, 5 and 6 provide a breakdown of the amount of hours and dollars spent
each year.  The respondents( average hourly burden is 172.5 per industry
respondent and 264.5 per application.  The average cost burden is
$13,023 per industry respondent and $17,774 per application.  The
average burden per application for EPA is 34.5 hours and $1,711.

Burden means the total time, effort, or financial resources expended by
persons to generate, maintain, retain, or disclose or provide
information to or for a Federal agency.  This includes the time need to
review instructions; develop, acquire, install, and utilize technology
and systems for the purposes of collecting, validating, and verifying
information, processing and ways to comply with any previously
applicable instructions and requirements; train personnel to be able to
respond to a collection of information; search data sources; complete
and review the collection of information; and transmit or otherwise
disclose the information.  An agency may not conduct or sponsor, and a
person is not required to respond to, a collection of information unless
it displays a currently valid OMB control number.  The OMB control
numbers for EPA(s regulation are listed in 40 CFR part 9 and 48 CFR
Chapter 15.

Send comments on the Agency’s need for this information, the accuracy
of the provided burden estimates, and any suggested methods for
minimizing respondent burden, including through the use of automated
collection techniques to the Director, Collection Strategies Division,
Office of Environmental Information, U.S. Environmental Protection
Agency (2822), 1200 Pennsylvania Avenue, NW, Washington, DC 20460; and
to the Office of Information and Regulatory Affairs, Office of
Management and Budget, 725 17th Street, NW, Washington, DC 20503,
Attention: Desk Officer for EPA.  Include the EPA ICR number and OMB
control number in any correspondence.

TABLE 1.  INDUSTRY RESPONDENT BURDEN ESTIMATES PER RESPONSE

Activity	

Hours

1.  Read rule, make compliance determination	15

2.  Receive training	7.5

3.  Plan activities	15

4.  Gather information	55

5.  Process, compile, and review information for accuracy and
appropriateness	20

6.  Complete application	37.5

Total Technical Hours	150

Total technical, managerial, and clerical hours	172.5



TABLE 2.  STATE AND LOCAL AGENCY BURDEN ESTIMATES PER RESPONSE

Activity	

Hours

1.  Answer respondent questions	8

2.  Log in and review/audit applications	36

3.  Determine early MACT, if required, and verify MACT is being proposed
36

Total Technical Hours	80

Total technical, managerial, and clerical hours	92



TABLE 3.  EPA BURDEN ESTIMATES PER RESPONSE

Activity	

Hours

1.  Audit, review applications	15

2.  Review decisions of permitting authority	15

Total Technical Hours	30

Total technical, managerial, and clerical hours	34.5

Table 4.  Burden Hours and Costs

	Total Over 3 Years	Annual Average	Total Over 3 Years	Annual Average

No. of Permit Applications	73	  =b2/3 \# "#,##0"    24 	73	  =d2/3 \#
"#,##0"    24 

	Person Hours (Hrs)	Labor Costs ($)

Industry Respondents	12,594	  =b5/3 \# "#,##0"  4,198 	948,094	  =d5/3
\# "#,##0"  316,031 

State and Local Agencies	6,716	  =b6/3 \# "#,##0"  2,239 	346,509	 
=d6/3 \# "#,##0"  115,503 

Total for Respondents	  =b5+b6 \# "#,##0"  19,310 	  =c5+c6 \# "#,##0" 
6,437 	  =d5+d6 \# "#,##0"  1,294,603 	  =e5+e6 \# "#,##0"  431,534 

EPA	253	  =b8/3 \# "#,##0"    84 	12,470	  =d8/3 \# "#,##0"  4,157 



Table 5.  Copying and Postal Costs ($)	Table 6.  Total Costs ($)

	Total Over 3 Years	Annual Average

Total Over 3 Years	Annual Average

Industry Respondents	2,615	  =b3/3 \# "#,##0"   872 	Industry
Respondents	950,709	  =e3/3 \# "#,##0"  316,903 

State and Local Agencies	292	  =b4/3 \# "#,##0"    97 	State and Local
Agencies	346,801	  =e4/3 \# "#,##0"  115,600 

Total for Respondents	  =b3+b4 \# "#,##0"  2,907 	  =c3+c4  969 	Total
for Respondents	  =e3+e4 \# "#,##0"  1,297,510 	  =SUM(ABOVE) \# "#,##0"
 432,503 

EPA	20	  =b6/3 \# "#,##0"     7 	EPA	12,490	  =e6/3 \# "#,##0"  4,163 



PART B OF THE SUPPORTING STATEMENT

This section is not applicable because statistical methods are not used
in the data collection associated with the CAA section 112(g)
regulations.

ATTACHMENT 1

List of Potentially Affected Industry Sectors (by SIC and NAICS codes)

SIC Code	SIC Description	NAICS Code	NAICS Title

0723	Crop Preparation Services for Market, Except Cotton Ginning (except
custom grain grinding)	115114

311119	Postharvest Crop Activities (except Cotton Ginning)

Other Animal Food Manufacturing

1011	Iron Ores	212210	Iron Ore Mining

1031	Lead and Zinc Ores	212231	Lead Ore and Zinc Ore Mining

1041	Gold Ores	212221 	Gold Ore Mining

1061	Ferroalloy Ores, Except Vanadium

	212234

212299	Copper Ore and Nickel Ore Mining

All Other Metal Ore Mining

1221	Bituminous Coal and Lignite Surface Mining	212111	Bituminous Coal
and Lignite Surface Mining

1311	Crude Petroleum and Natural Gas	211111	Crude Petroleum and Natural
Gas Extraction

1321	Natural Gas Liquids	211112	Natural Gas Liquid Extraction

1474	Potash, Soda, and Borate Minerals	212391	Potash, Soda, and Borate
Mineral Mining

1799	Special Trade Contractors, NEC (paint and wallpaper stripping and
wallpaper removal contractors)  	23251	 ADVANCE \d4 Painting and Wall
Covering Contractors

1799	Specialty Trade Contractors, NEC (tinting glass work)	23952	
ADVANCE \d4 Glass and Glazing Contractors      

1799	Asbestos Abatement and Lead Paint Removal Contractors 	56291
Remediation Services 

1799	All Other Special Trade Contractors 	23599	All Other Special Trade
Contractors 

2023	Dry, Condensed and Evaporated Dairy Products	311514	Dry, Condensed,
and Evaporated Dairy Product Manufacturing

2034	Dried and Dehydrated Fruits, Vegetables and Soup Mixes: Dried and
Dehydrated Fruits and Vegetables 	311423	Dried and Dehydrated Food
Manufacturing 

2034	Dried and Dehydrated Fruits, Vegetables and Soup Mixes: Soup Mixes
Made from Purchased Dried and Dehydrated Vegetables 	311999	All Other
Miscellaneous Food Manufacturing 

2034	Dried and Dehydrated Fruits, Vegetables and Soup Mixes: Vegetable
Flours	311211	Flour Milling

2037	Frozen Fruits, Fruit Juices, and Vegetables	311411	Frozen Fruit,
Juice, and Vegetable Manufacturing

2041	Flour and Other Grain Mill Products	311211	Flour Milling 

2043	Cereal Breakfast Foods (breakfast cereal)	31123	Breakfast Cereal
Manufacturing

2043	Cereal Breakfast Foods (coffee substitute)	31192	Coffee and Tea
Manufacturing		

2044	Rice Milling	311212	Rice Milling

2046	Wet Corn Milling (except refining purchased oil)	311221	Wet Corn
Milling

2046	Wet Corn Milling (refining purchased oil)	311225	Fats and Oils
Refining and Blending

2047	Dog and Cat Food	311111	Dog and Cat Food Manufacturing

2048	Prepared Feeds and Feed Ingredients for Animals and Fowls, Except
Dogs and Cats (except slaughtering animals for pet food)	311119	Other
Animal Food Manufacturing

2053	Frozen Bakery Products, Except Bread	311813	Frozen Cakes, Pies, and
Other Pastries Manufacturing

2061	Cane Sugar, Except Refining	311311	Sugarcane Mills

2074	Cottonseed Oil Mills (cottonseed processing)	311223	Other Oilseed
Processing

2074	Cottonseed Oil Mills (processing purchased cottonseed oil)	311225
Fats and Oils Refining and Blending

2075	Soybean Oil Mills (soybean processing)	311222	Soybean Processing

2075	Soybean Oil Mills (processing purchased soybean oil)	311225	Fats
and Oils Refining and Blending

2076	Vegetable Oil Mills, Except Corn, Cottonseed, and Soybean (oilseed
processing)	311223	Other Oilseed Processing

2076	Vegetable Oil Mills, Except Corn, Cottonseed, and Soybean
(processing purchased vegetable oils)	311225	Fats and Oils Refining and
Blending

2077	Animal and Marine Fats and Oils (animal fats and oils)	311613
Rendering and Meat Byproduct Processing

2077	Animal and Marine  Fats and Oils (canned marine fats and oils)
311711	Seafood Canning

2077	Animal and Marine Fats and Oils (fresh and frozen marine fats and
oils)	311712	Fresh and Frozen Seafood Processing

2082	Malt Beverages (malt extract)	311942	Spice and Extract
Manufacturing

2082	Malt Beverages (malt extract)	31212	Breweries

2085	Distilled and Blended Liquors (applejack)	31213	Wineries

2085	Distilled and Blended Liquors (except applejack)	31214	Distilleries

2087	Flavoring Extracts and Flavoring Syrups, NEC (coffee flavoring and
syrups)	31192	Coffee and Tea Manufacturing



2087	Flavoring Extracts and Flavoring Syrups (flavoring syrup and
concentrate, except coffee)	31193	Flavoring Syrup and Concentrate
Manufacturing

2087	Flavoring Extracts and Flavoring Syrups (flavoring extracts and
natural food colorings)	311942	Spice and Extract Manufacturing

2087	Flavoring Extracts and Flavoring Syrups (powered drink mix)	311999
All Other Miscellaneous Food Manufacturing

2098	Macaroni, Spaghetti, Vermicelli and Noodles	311823	Dry Pasta
Manufacturing 

2099	Food Preparations, NEC (dry pasta packaged with other ingredients
made in dry pasta plants)	311823	Dry Pasta Manufacturing 

2099	Food Preparations, NEC (tortillas)	31183	Tortilla Manufacturing 

2099	Food Preparations, NEC (peanut butter)	311911	Roasted Nuts and
Peanut Butter Manufacturing

2099	Food Preparations, NEC (tea)	31192	Coffee and Tea Manufacturing	

2099	Food Preparations, NEC (vinegar, prepared dips (except dairy), and
cider)	311941	Mayonnaise, Dressing, and Other Prepared Sauce
Manufacturing

2099	Food Preparations, NEC (spices, dip mix, salad dressing mix, and
seasoning mix)	311942	Spice and Extract Manufacturing

2099	Food Preparations, NEC (perishable prepared food)	311991	Perishable
Prepared Food Manufacturing

2099	Food Preparations, NEC (except bouillon, marshmallow creme, spices,
extracts, peanut butter, perishable prepared foods, tortillas, tea,
spices, dip mix, salad dressing mix, seasoning mix, and vinegar)	311999
All Other Miscellaneous Food Manufacturing

2099	Food Preparations, NEC (rice, uncooked and packaged with other
ingredients made in rice mills)	311212	Rice Milling

2099	Food Preparations, NEC (marshmallow creme)	31134	Nonchocolate
Confectionery Manufacturing

2099	Food Preparation, NEC (bouillon, and potatoes dried and packaged
with other ingredients)	311423	Dried and Dehydrated Food Manufacturing

2111	Cigarettes	312221	Cigarette Manufacturing

2141	Tobacco Stemming and Redrying (redrying and stemming)	31221	Tobacco
Stemming and Redrying

2141	Tobacco Stemming and Redrying (reconstituted tobacco)	312229	Other
Tobacco Product Manufacturing

2211	Broadwoven Fabric Mills, Cotton	31321	Broadwoven Fabric Mills

2211	Broadwoven Fabric Mills, Manmade Fiber and Silk	31321	Broadwoven
Fabric Mills

2252	Hosiery, NEC (dyeing and finishing only)	313312	Textile and Fabric
Finishing (except Broadwoven Fabric) Mills

2252	Hosiery, NEC (girls( hosiery except dyeing and finishing only)
315111	Sheer Hosiery Mills

2252	Hosiery, NEC (socks except dyeing and finishing only)	315119	Other
Hosiery and Sock Mills

2261	Finishers of Broadwoven Fabrics of Cotton	313311	Broadwoven Fabric
Finishing Mills

2262	Finishers of Broadwoven Fabrics of Manmade Fiber and Silk		313311
Broadwoven Fabric Finishing Mills

2284	Thread Mills (thread finishing)	313312	Textile and Fabric Finishing
(except Broadwoven Fabric) Mills

2284	Thread Mills (except finishing)	313113	Thread Mills

2295	Coated Fabrics, Not Rubberized	31332	Fabric Coating Mills

2297	Nonwoven Fabrics	31323	Nonwoven Fabric Mills

2381	Dress and Work Gloves, Except Knit and All-Leather  (men(s and
boys( contractors)	315211	Men(s and Boys( Cut and Sew Apparel
Contractors

2381	Dress and Work Gloves, Except Knit and All-Leather (woman(s,
girls(, and infants( contractors)	315212	Women(s, Girls(, and Infants(
Cut and Sew Apparel Contractors

2381	Dress and Work Gloves, Except Knit and All-Leather (except
contractors)	315992	Glove and Mitten Manufacturing

2396	Automotive Trimmings, Apparel Findings, and Related Products
(textile products except automotive trimmings; apparel bindings and
trimmings; and printing and embossing on fabric articles)	314999	All
Other Miscellaneous Textile Product Mills

2396	Automotive Trimmings, Apparel Findings, and Related Products
(apparel findings and trimming)	315999	Other Apparel Accessories and
Other Apparel Manufacturing

2396	Automotive Trimmings, Apparel Findings, and Related Products
(printing and embossing on fabric articles)	323113	Commercial Screen
Printing

2396	Automotive Trimmings, Apparel Findings, and Related Products
(textile motor vehicle trimming)	33636	Motor Vehicle Seating and
Interior Trim Manufacturing

2399	Fabricated Textile Products, NEC (except apparel, automotive seat
belts, and seat and tire covers)	314999	All Other Miscellaneous Textile
Product Mills

2399	Fabricated Textile Products, NEC (apparel and apparel accessories)
315999	Fabricated Textile Products, NEC (apparel and apparel
accessories)

2399	Fabricated Textile Products, NEC (seat belts, and seat and tire
covers)	33636	Motor Vehicle Seating and Interior Trim Manufacturing

2421	Sawmills and Planing Mills, General (sawmills)	321113	Sawmills

2421	Sawmills and Planing Mills, General (lumber manufacturing from
purchased lumber, softwood cut stock, wood lath, fence pickets, and
planing mill products)	321912	Cut Stock, Resawing Lumber, and Planing

2421	Sawmills and Planing Mills, General (softwood flooring)	321918
Other Millwork (including Flooring ) 

2421	Sawmills and Planing Mills, General (kiln drying)	321999	All Other
Miscellaneous Wood Product Manufacturing

2426	Hardwood Dimension and Flooring Mills (hardwood dimension from logs
and bolts)	321113	Sawmills

2426	Hardwood Dimension and Flooring Mills (except flooring)	321912	Cut
Stock, Resawing Lumber, and Planing

2426	Hardwood Dimension and Flooring Mills (hardwood flooring)	321918
Other Millwork (including Flooring ) 

2426	Hardwood Dimension and Flooring Mills (wood furniture frames and
finished furniture parts)	337215	Showcase, Partition, Shelving, and
Locker Manufacturing

2431	Millwork (wood windows and doors)	321911	Wood Window and Door
Manufacturing

2431	Millwork (except wood doors and windows)	321918	Other Millwork
(including Flooring ) 

2434	Wood Kitchen Cabinets	33711	Wood Kitchen Cabinet and Countertop
Manufacturing

2435	Hardwood Veneer and Plywood	321211	Hardwood Veneer and Plywood
Manufacturing

2436	Softwood Veneer and Plywood	321212	Softwood Veneer and Plywood
Manufacturing

2439	Structural Wood Members, NEC (except trusses)	321213	Engineered
Wood Member (except Truss) Manufacturing

2439	Structural Wood Members, NEC (trusses)	321214	Truss Manufacturing

2451	Mobile Homes	321991	Manufactured Home (Mobile Home) Manufacturing

2452	Prefabricated Wood Buildings and Components	321992	Prefabricated
Wood Building Manufacturing

2491	Wood Preserving	321114	Wood Preservation

2493	Reconstituted Wood Products	321219	Reconstituted Wood Product
Manufacturing

2499	Wood Products, NEC (wood tubs and vats, jewelry, cigar boxes, and
baskets, except fruit, vegetable, fish and bait)	32192	Wood Container
and Pallet Manufacturing

2499	Wood Products, NEC (other wood products)	321999	All Other
Miscellaneous Wood Product Manufacturing

2499	Wood Products, NEC (wood cooling towers)	333414	Heating Equipment
(except Warm Air Furnaces) Manufacturing

2499	Wood Products, NEC (mirror and picture frames)	339999	All Other
Miscellaneous Manufacturing

2511	Wood Household Furniture, Except Upholstered (except wood box
spring frames)	337122	Nonupholstered Wood Household Furniture
Manufacturing

2511	Wood Household Furniture, Except Upholstered (wood box spring
frames)	337215	Showcase, Partition, Shelving, and Locker Manufacturing

2512	Wood Household Furniture, Upholstered	337121	Upholstered Household
Furniture Manufacturing

2517	Wood Television, Radio, Phonograph, and Sewing Machine Cabinets
337129	Wood Television, Radio, and Sewing Machine Cabinet Manufacturing

2519	Household Furniture, NEC	337125	Household Furniture (except Wood
and Metal) Manufacturing

2521	Wood Office Furniture	337211	Wood Office Furniture Manufacturing 

2531	Public Buildings and Related Furniture (blackboards)	339942	Lead
Pencil and Art Good Manufacturing

2531	Public Building and Related Furniture (seats for motor vehicles)
33636	Motor Vehicle Seating and Interior Trim Manufacturing

2531	Public Building and Related Furniture (furniture made for public
buildings)	337127	Institutional Furniture Manufacturing

2541	Wood Office and Store Fixtures, Partitions, Shelving, and Lockers
(wood lunchroom tables and chairs)	337127	Institutional Furniture
Manufacturing

2541	Wood Office and Store Fixtures, Partitions, Shelving, and Lockers
(architectural woodwork, millwork, and fixtures)	337212	Custom
Architectural Woodwork and Millwork Manufacturing

2541	Wood Office and Store Fixtures, Partitions, Shelving, and Lockers
(except counter tops, custom architectural woodwork, millwork, lunchroom
and other fixtures)	337215	Showcase, Partition, Shelving, and Locker
Manufacturing

2542	Office and Store Fixtures, Partitions, Shelving, and Lockers,
Except Wood (lunchroom tables and chairs (except wood))	337127
Institutional Furniture Manufacturing

2542	Office and Store Fixtures, Partitions, Shelving and Lockers, Except
Wood (except lunchroom tables and chairs)	337215	Showcase, Partition,
Shelving, and Locker Manufacturing

2591	Drapery Hardware and Window Blinds and Shades	33792	Blind and Shade
Manufacturing

2599	Furniture and Fixtures, NEC (except hospital beds)	337127
Institutional Furniture Manufacturing

2599	Furniture and Fixtures, NEC (hospital beds)	339111	Laboratory
Apparatus and Furniture Manufacturing

2611	Pulp Mills (pulp producing mills only)	32211	Pulp Mills

2611	Pulp Mills (pulp mills producing paper)	322121	Paper (except
Newsprint) Mills

2611	Pulp Mills (pulp mills producing newsprint)	322122	Newsprint Mills

2611	Pulp Mills (pulp mills producing paperboard)	32213	Paperboard Mills

2621	Paper Mills (except newsprint mills)	322121	Paper (except
Newsprint) Mills

2621	Paper Mills (newsprint mills)	322122	Newsprint Mills

2631	Paperboard Mills	32213	Paperboard Mills

2652	Setup Paperboard Boxes	322213	Setup Paperboard Box Manufacturing

2657	Folding Paperboard Boxes, Including Sanitary	322212	Folding
Paperboard Box Manufacturing

2671	Packaging Paper and Plastics Film, Coated and Laminated (single-web
paper, paper multiweb laminated rolls and sheets for packaging uses)
322221	Coated and Laminated Packaging Paper and Plastics Film
Manufacturing

2671	Packaging Paper and Plastics Film, Coated, and Laminated (plastics
packaging film and sheet)	326112	Unsupported Plastics Packaging Film and
Sheet Manufacturing

2672	Coated and Laminated Paper, NEC	322222	Coated and Laminated Paper
Manufacturing

2673	Plastics, Foil, and Coated Paper Bags (except all plastics)	322223
Plastics, Foil, and Coated Paper Bag Manufacturing

2673	Plastics, Foil, and Coated Paper Bags (plastics bags)	326111
Unsupported Plastics Bag Manufacturing

2679	Converted Paper and Paperboard Products, NEC (corrugated paper)
322211	Corrugated and Solid Fiber Box Manufacturing

2679	Converted Paper and Paperboard Products, NEC (wallpaper and gift
wrap paper)	322222	Coated and Laminated Paper Manufacturing

2679	Converted Paper and Paperboard Products, NEC (paper supplies for
business machines and other paper office supplies)	322231	Die-Cut Paper
and Paperboard Office Supplies Manufacturing

2679	Converted Paper and Paperboard Products, NEC ( other converted
paper and paperboard products, such as paper filters, crepe paper, and
laminated and tiled wallboard)	322299	All Other Converted Paper Product
Manufacturing

2721	Periodicals: Publishing, or Publishing and Printing	51112
Periodical Publishers

2731	Books: Publishing, or Publishing and Printing (except music books)
51113	Book Publishers

2731	Books: Publishing, or Publishing and Printing (music books)	51223
Music Publishers

2752	Commercial Printing, Lithographic (except quick printing)	323110
Commercial Lithographic Printing

2752	Commercial Printing, Lithographic (quick printing)	323114	Quick
Printing

2754	Commercial Printing, Gravure	323111	Commercial Gravure Printing

2759	Commercial Printing, NEC (flexographic printing)	323112	Commercial
Flexographic Printing

2759	Commercial Printing, NEC (screen printing)	323113	Commercial Screen
Printing

2759	Commercial Printing, NEC (quick printing)	323114	Quick Printing

2759	Commercial Printing, NEC (digital printing, except quick printing)
323115	Digital Printing

2759	Commercial Printing, NEC (other commercial printing except quick
printing)	323119	Other Commercial Printing 

2771	Greeting Cards (other printing of greeting cards)	323119	Other
Commercial Printing 

2771	Greeting Cards (publishing greeting cards)	511191	Greeting Card
Publishers

2771	Greeting Cards (lithographic printing of greeting cards)	323110
Commercial Lithographic Printing

2771	Greeting Cards (gravure printing of greeting cards)	323111
Commercial Gravure Printing

2771	Greeting Cards (flexographic printing of greeting cards)	323112
Commercial Flexographic Printing

2771	Greeting Cards (screen printing of greeting cards)	323113
Commercial Screen Printing

2771	Greeting Cards (other printing of greeting cards)	323119	Other
Commercial Printing 

2789	Bookbinding and Related Work	323121	Tradebinding and Related Work

2796	Platemaking and Related Services	323122	Prepress Services

2812	Alkalies and Chlorine	325181	Alkalies and Chlorine Manufacturing

2813	Industrial Gases	32512	Industrial Gas Manufacturing

2816	Inorganic Pigments (except bone and lamp black)	325131	Inorganic
Dye and Pigment Manufacturing

2816	Inorganic pigments (bone and lamp black)	325182	Carbon Black
Manufacturing

2819	Industrial Inorganic Chemicals, NEC (except activated carbon and
charcoal, alumina, and inorganic industrial dyes)	325188	All Other Basic
Inorganic Chemical Manufacturing

2819	Industrial Inorganic Chemicals, NEC (activated carbon and charcoal)
325998	All Other Miscellaneous Chemical Product and Preparation
Manufacturing

2819	Industrial Inorganic Chemicals, NEC (alumina)	331311	Alumina
Refining

2819	Industrial Inorganic Chemicals, NEC (recovering sulfur from natural
gas)	211112	Natural Gas Liquid Extraction

2821	Plastics Materials, Synthetic and Resins, and Nonvulcanizable
Elastomers	325211	Plastics Material and Resin Manufacturing

2822	Synthetic Rubber	325212	Synthetic Rubber Manufacturing

2823	Cellulosic Manmade Fibers	325221	Cellulosic Organic Fiber
Manufacturing

2824	Manmade Organic Fibers, Except Cellulosic	325222	Noncellulosic
Organic Fiber Manufacturing

2833	Medicinal Chemicals and Botanical Products	325411	Medicinal and
Botanical Manufacturing

2834	Pharmaceutical Preparations	325412	Pharmaceutical Preparation 
Manufacturing

2842	Specialty Cleaning, Polishing, and Sanitary Preparations	325612
Polish and Other Sanitation Good Manufacturing

2843	Surface Active Agents, Finishing Agents, Sulfonated Oils, and
Assistants	325613	Surface Active Agent  Manufacturing

2851	Paints, Varnishes, Lacquers, Enamels and Allied Products	32551
Paint and Coating Manufacturing

2861	Gum and Wood Chemicals	325191	Gum and Wood Chemical Manufacturing

2865	Cyclic Organic Crudes and Intermediates and Organic Dyes and
Pigments (except aromatics and organic dyes and pigments)	325192	Cyclic
Crude and Intermediate Manufacturing

2865	Cyclic Organic Crudes and Intermediates, and Organic Dyes and
Pigments (aromatics)	32511	Petrochemical Manufacturing

2865	Cyclic Organic Crudes and Intermediates, and Organic Dyes and
Pigments (organic dyes and pigments)	325132	Synthetic Organic Dye and
Pigment  Manufacturing

2869	Industrial Organic Chemicals, NEC (aliphatics)	32511	Petrochemical
Manufacturing

2869	Industrial Organic Chemicals, NEC (fluorocarbon gases)	32512
Industrial Gas Manufacturing

2869	Industrial Organic Chemicals, NEC (carbon bisulfide)	325188	All
Other Basic Inorganic Chemical Manufacturing

2869	Industrial Organic Chemicals (ethyl alcohol)	325193	Ethyl Alcohol
Manufacturing

2869	Industrial Organic Chemicals, NEC (except aliphatics, carbon
bisulfide, ethyl alcohol, and fluorocarbon gases)	325199	All Other Basic
Organic Chemical Manufacturing

2873	Nitrogenous Fertilizers	325311	Nitrogenous Fertilizer Manufacturing

2874	Phosphatic Fertilizers	325312	Phosphatic Fertilizer Manufacturing

2879	Pesticides and Agricultural Chemicals, NEC	32532	Pesticide and
Other Agricultural Chemical Manufacturing

2891	Adhesives and Sealants	32552	Adhesive Manufacturing

2893	Printing Ink	32591	Printing Ink Manufacturing

2895	Carbon Black	325182	Carbon Black Manufacturing

2899	Chemical and Chemical Preparations, NEC (fatty acids)	325199	All
Other Basic Organic Chemical Manufacturing

2899	Chemicals and Chemical Preparations, NEC (frit)	32551	Paint and
Coating Manufacturing

2899	Chemicals and Chemical Preparations, NEC (except frit and table
salt)	325998	All Other Miscellaneous Chemical Product and Preparation
Manufacturing

2899	Chemical Preparations, NEC (table salt)	311942	Spice and Extract
Manufacturing

2911	Petroleum Refining	32411	Petroleum Refineries

2951	Asphalt Paving Mixtures and Blocks	324121	Asphalt Paving Mixture
and Block Manufacturing

2992	Lubricating Oils and Greases	324191	Petroleum Lubricating Oil and
Grease Manufacturing

2999	Products of Petroleum and Coal, NEC	324199	All Other Petroleum and
Coal Products Manufacturing

3011	Tires and Inner Tubes	326211	Tire Manufacturing (except Retreading)

3021	Rubber and Plastics Footwear	316211	Rubber and Plastics Footwear
Manufacturing

3052	Rubber and Plastics Hose and Belting	32622	Rubber and Plastics
Hoses and Belting Manufacturing

3053	Gaskets, Packing, and Sealing Devices	339991	Gasket, Packing, and
Sealing Device Manufacturing

3061	Molded, Extruded, and Lathe-Cut Mechanical Rubber Goods	326291
Rubber Product Manufacturing for Mechanical Use

3069	Fabricated Rubber Products, NEC (except rubberized fabric and
rubber resilient floor covering)	326299	All Other Rubber Product
Manufacturing

3069	Fabricated Rubber Products, NEC (rubber gloves and life jackets)
339113	Surgical Appliance and Supplies Manufacturing

3069	Fabricated Rubber Products, NEC (wet suits)	33992	Sporting and
Athletic Goods Manufacturing

3069	Fabricated Rubber Products, NEC (rubber toys, except dolls)	339932
Game, Toy, and Children's Vehicle Manufacturing

3069	Fabricated Rubber Products, NEC (rubberizing fabric or purchased
textile products)	31332	Fabric Coating Mills

3069	Fabricated Rubber Products, NEC (rubber pants and raincoats)	315299
All Other Cut and Sew Apparel Manufacturing

3069	Fabricated Rubber Products, NEC (rubber bibs, aprons and bathing
caps)	315999	Other Apparel Accessories and Other Apparel Manufacturing

3069	Fabricated Rubber Products, NEC (rubber resilient floor coverings)
326192	Resilient Floor Covering Manufacturing

3079



	3081	Unsupported Plastics Film and Sheets	326113	Unsupported Plastics
Film and Sheet (except Packaging) Manufacturing

3082	Unsupported Plastics Profile Shapes	326121	Unsupported Plastics
Profile Shape Manufacturing

3083	Laminated Plastics Plate, Sheet, and Profile Shapes	32613	Laminated
Plastics Plate, Sheet, and Shape Manufacturing

3084	Plastics Pipe	326122	Plastics Pipe and Pipe Fitting Manufacturing

3085	Plastics Bottles	32616	Plastics Bottle Manufacturing

3086	Plastics Foam Products (polystyrene foam products)	32614
Polystyrene Foam Product Manufacturing

3086	Plastics Foam Products (urethane and other foam products)	32615
Urethane and Other Foam Product (except Polystyrene) Manufacturing

3087	Custom Compounding of Purchased Plastics Resin	325991	Custom
Compounding of Purchased Resins

3088	Plastics Plumbing Fixtures	326191	Plastics Plumbing Fixture
Manufacturing

3089	Plastics Products, NEC (except plastics pipe fittings and plastics
sausage casings)	326199	All Other Plastics Product Manufacturing

3089	Plastics Products, NEC (finished plastics furniture parts)	337215
Showcase, Partition, Shelving, and Locker Manufacturing

3089	Plastics Product, NEC (plastics sausage casings)	326121	Unsupported
Plastics Profile Shape Manufacturing

3089	Plastics Products, NEC (pipe fittings)	326122	Plastics Pipe and
Pipe Fitting Manufacturing

3131	Boat and Shoe Cut Stock and Findings (metal buckles)	339993
Fastener, Button, Needle, and Pin Manufacturing

3143	MenÆs Footwear, Except Athletic	316213	MenÆs Footwear (except
Athletic) Manufacturing

3144	WomenÆs Footwear, Except Athletic	316214	WomenÆs Footwear (except
Athletic) Manufacturing 

3149	Footwear Except Rubber, NEC	316219	Other Footwear Manufacturing

3221	Glass Containers	327213	Glass Container Manufacturing

3229	Pressed and Blown Glass and Glassware, NEC	327212	Other Pressed and
Blown Glass and Glassware Manufacturing

3231	Glass Products Made of Purchased Glass	327215	Glass Product
Manufacturing Made of Purchased Glass

3241	Cement, Hydraulic	32731	Cement Manufacturing

3251	Brick and Structural Clay Tile (slumped brick)	327331	Concrete
Block and Brick Manufacturing

3251	Brick and Structural Clay Tile (except slumped brick)	327121	Brick
and Structural Clay Tile Manufacturing

3253	Ceramic Wall and Floor Tile	327122	Ceramic Wall and Floor Tile
Manufacturing

3255	Clay Refractories	327124	Clay Refractory Manufacturing

3261	Vitreous China Plumbing Fixtures and China and Earthenware Fittings
and Bathroom Accessories	327111	Vitreous China Plumbing Fixture and
China and Earthenware Bathroom Accessories Manufacturing

3273	Ready-Mixed Concrete	32732	Ready-Mix Concrete Manufacturing

3281	Cut Stone and Stone Products	327991	Cut Stone and Stone Product
Manufacturing

3291	Abrasive Products (steel wool with or without soap)	332999	All
Other Miscellaneous Fabricated Metal Product Manufacturing

3291	Abrasive Products (except steel wool with or without soap)	32791
Abrasive Product Manufacturing

3292	Asbestos Products (asbestos brake linings and pads)	33634	Motor
Vehicle Brake System Manufacturing

3292	Asbestos Products (except brake pads and linings)	327999	All Other
Miscellaneous Nonmetallic Mineral Product Manufacturing

3295	Minerals and Earths, Ground or Otherwise Treated (grinding,
washing, separating, etc. of minerals in SIC 1455)	212324	Kaolin and
Ball Clay Mining

3295	Minerals and Earths, Ground or Otherwise Treated (grinding,
washing, separating, etc. of minerals in SIC 1459)	212325	Clay and
Ceramic and Refractory Minerals Mining

3295	Minerals and Earths, Ground or Otherwise Treated (grinding,
washing, separating, etc. of minerals in SIC 1479)	212393	Other Chemical
and Fertilizer Mineral Mining

3295	Minerals and Earths, Ground or Otherwise Treated (grinding,
washing, separating, etc. of minerals in SIC 1499)	212399	All Other
Nonmetallic Mineral Mining

3295	Minerals and Earths, Ground or Otherwise Treated (except grinding,
washing, separating, etc. of nonmetallic minerals)	327992	Ground or
Treated Mineral and Earth Manufacturing

3296	Mineral Wool	327993	Mineral Wool Manufacturing

3299	Nonmetallic Mineral Products, NEC (except moldings, ornamental
and architectural plaster work, clay and gypsum statuary)	327999	All
Other Miscellaneous Nonmetallic Mineral Product Manufacturing

3299	Nonmetallic Mineral Products, NEC (clay statuary)	327112	Vitreous
China, Fine Earthenware, and Other Pottery Product Manufacturing

3299	Nonmetallic Mineral Products, NEC (moldings, ornamental and
architectural plaster work and gypsum statuary )	32742	Gypsum Product
Manufacturing

3312	Steel Works, Blast Furnaces (Including Coke Ovens), and Rolling
Mills (except coke ovens not integrated with steel mills and hot rolling
purchased steel)	331111	Iron and Steel Mills

3312	Steel Works, Blast Furnaces (including coke ovens), and Rolling
Mills (hot rolling purchased steel)	331221	Rolled Steel Shape
Manufacturing

3312	Blast Furnaces and Steel Mills (coke ovens)	324199	All Other
Petroleum and Coal Products Manufacturing

3313	Electrometallurgical Products, Except Steel	331112
Electrometallurgical Ferroalloy Product Manufacturing

3315	Steel Wiredrawing and Steel Nails and Spikes (steel, wire drawing)
331222	Steel Wire Drawing

3316	Cold-Rolled Steel Sheet, Strip and Bars	331221	Rolled Steel Shape
Manufacturing

3317	Steel Pipe and Tubes	33121	Iron and Steel Pipe and Tube
Manufacturing from  Purchased Steel

3321	Gray and Ductile Iron Foundries	331511	Iron Foundries

3334	Primary Production of Aluminum	331312	Primary Aluminum Production

3339	Primary Smelting and Refining of Nonferrous Metals, Except Copper
and Aluminum	331419	Primary Smelting and Refining of Nonferrous Metal
(except Copper and Aluminum)

3341	Secondary Smelting and Refining of Nonferrous Metals (copper)
331423	Secondary Smelting, Refining, and Alloying of Copper

3341	Secondary Smelting and Refining of Nonferrous Metals (except copper
and aluminum)	331492	Secondary Smelting, Refining, and Alloying of
Nonferrous Metal (except Copper and Aluminum)

3341	Secondary Smelting and Refining of  Nonferrous Metals (aluminum)
331314	Secondary Smelting and Alloying of Aluminum

3351	Rolling, Drawing, and Extruding of Copper	331421	Copper Rolling,
Drawing, and Extruding

3353	Aluminum Sheet, Plate, and Foil	331315	Aluminum Sheet, Plate, and
Foil Manufacturing

3354	Aluminum Extruded Products	331316	Aluminum Extruded Product
Manufacturing

3357	Drawing and Insulating of Nonferrous Wire (aluminum wire drawing)
331319	Other Aluminum Rolling and Drawing

3357	Drawing and Insulating of Nonferrous Wire (copper wire drawing)
331422	Copper Wire (except Mechanical) Drawing

3357	Drawing and Insulating of Nonferrous Wire (wire drawing except
copper or aluminum)	331491	Nonferrous Metal (except Copper and Aluminum)
Rolling, Drawing, and Extruding

3357	Drawing and Insulating of Nonferrous Wire (fiber optic
cable-insulating only	335921	Fiber Optic Cable Manufacturing

3357	Drawing and Insulating of Nonferrous Wire (communication and energy
wire, except fiber optic-insulating only)	335929	Other Communication and
Energy Wire Manufacturing

3364	Nonferrous Die-Castings, Except Aluminum	331522	Nonferrous (except
Aluminum) Die-Casting Foundries

3365	Aluminum Foundries	331524	Aluminum Foundries (except Die-Casting)

3366	Copper Foundries	331525	Copper Foundries (except Die-Casting)

3369	Nonferrous Foundries, Except Aluminum and Copper	331528	Other
Nonferrous Foundries (except Die-Casting)

3398	Metal Heat Treating	332811	Metal Heat Treating

3399	Primary Metal Products, NEC (laminating steel)	332813
Electroplating, Plating, Polishing, Anodizing, and Coloring

3411	Metal Cans	332431	Metal Can Manufacturing

3412	Metal Shipping Barrels, Drums, Kegs, and Pails	332439	Other Metal
Container Manufacturing

3421	Cutlery (except tool-type shears)	332211	Cutlery and Flatware
(except Precious) Manufacturing

3421	Cutlery (tool-type shears)	332212	Hand and Edge Tool Manufacturing

3423	Hand and Edge Tools, Except Machine Tools and Handsaws	332212	Hand
and Edge Tool Manufacturing

3429	Hardware, NEC (vacuum and insulated bottles, jugs, and chests)
332439	Other Metal Container Manufacturing

3429	Hardware, NEC (other hardware)	33251	Hardware Manufacturing

3429	Hardware, NEC (turnbuckles and hose clamps)	332722	Bolt, Nut,
Screw, Rivet, and Washer Manufacturing

3429	Hardware, NEC (fireplace fixtures, traps, handcuffs and leg irons,
ladder jacks, and other like metal products)	332999	All Other
Miscellaneous Fabricated Metal Product Manufacturing

3429	Hardware, NEC (luggage and utility racks)	336399	All Other Motor
Vehicle Parts Manufacturing

3429	Hardware, NEC (convertible bed sleeper mechanisms, chair glides)
337215	Showcase, Partition, Shelving, and Locker Manufacturing

3432	Plumbing Fixture Fittings and Trim (except shower rods and lawn
hose nozzles)	332913	Plumbing Fixture Fitting and Trim  Manufacturing

3432	Plumbing Fixture Fittings and Trim (lawn hose nozzles)	332919	Other
Metal Valve and Pipe Fitting Manufacturing

3432	Plumbing Fixture Fittings and Trim (metal shower rods)	332999	All
Other Miscellaneous Fabricated Metal Product Manufacturing

3433	Heating Equipment, Except Electric and Warm Air Furnaces	333414
Heating Equipment (except Warm Air Furnaces) Manufacturing

3442	Metal Doors, Sash, Frames, Molding and Trim	332321	Metal Window and
Door Manufacturing  

3443	Fabricated Plate Work (Boiler Shops) (power boilers and heat
exchangers)	33241	Power Boiler and Heat Exchanger Manufacturing

3443	Fabricated Plate Work (Boiler Shops) (heavy gauge tanks)	33242
Metal Tank (Heavy Gauge) Manufacturing 

3443	Fabricated Plate Work (Boiler Shops) (metal cooling towers)	333414
Heating Equipment (except Warm Air Furnaces) Manufacturing

3443	Fabricated Plate Work (Boiler Shops) (fabricated plate work and
metal weldments)	332313	Plate Work Manufacturing

3443	Fabricated Plate Work (Boiler Shops) (power boilers and heat
exchangers)	33241	Power Boiler and Heat Exchanger Manufacturing

3443	Fabricated Plate Work (Boiler Shops) (fabricated plate work and
metal weldments)	332313	Plate Work Manufacturing

3444	Sheet Metal Work (metal bins and vats)	332439	Other Metal Container
Manufacturing

3444	Sheet Metal Work (sheet metal cooling towers)	333414	Heating
Equipment (except Warm Air Furnaces) Manufacturing

3444	Sheet Metal Work (ducts, flumes, flooring, siding, dampers, etc.)
332321	Metal Window and Door Manufacturing  

3446	Architectural and Ornamental Metal Work	332323	Ornamental and
Architectural Metal Work  Manufacturing

3448	Prefabricated Metal Buildings and Components	332311	Prefabricated
Metal Building and Component  Manufacturing

3449	Miscellaneous Structural Metal Work (fabricated bar joists and
concrete reinforcing bars)	332312	Fabricated Structural Metal
Manufacturing

3449	Miscellaneous Structural Metal Work (curtain wall)	332321	Metal
Window and Door Manufacturing  



3449	

Miscellaneous Structural Metal Work (metal plaster bases)	

332323	

Ornamental and Architectural Metal Work  Manufacturing

3449	Miscellaneous Structural Metal Work (custom roll forming)	332114
Custom Roll Forming

3451	Screw Machine Products	332721	Precision Turned Product
Manufacturing

3452	Bolts, Nuts, Screws, Rivets, and Washers	332722	Bolt, Nut, Screw,
Rivet, and Washer Manufacturing

3463	Nonferrous Forgings	332112	Nonferrous Forging

3465	Automotive Stampings	33637	Motor Vehicle Metal Stamping

3466	Crowns and Closures	332115	Crown and Closure Manufacturing

3469	Metal Stampings, NEC (except kitchen utensils, pots and pans for
cooking, and coins)	332116	Metal Stamping

3469	Metal Stampings, NEC (kitchen utensils, pots, and pans for cooking)
332214	Kitchen Utensil, Pot, and Pan Manufacturing

3471	Electroplating, Plating, Polishing, Anodizing, and Coloring	332813
Electroplating, Plating, Polishing, Anodizing, and Coloring

3479	Coating, Engraving, and Allied Services, NEC (jewelry engraving
and etching, including precious metal)	339911	Jewelry (except Costume)
Manufacturing

3479	Coating, Engraving, and Allied Services, NEC (silver and plated
ware engraving and etching)	339912	Silverware and Hollowware
Manufacturing

3479	Coating, Engraving, and Allied Services, NEC (costume jewelry
engraving and etching)	339914	Costume Jewelry and Novelty Manufacturing

3479	Coating, Engraving, and Allied Services, NEC (except jewelry,
silverware, and flatware engraving and etching)	332812	Metal Coating,
Engraving (except Jewelry and Silverware), and Allied Services to
Manufacturers

3483	Ammunition, Except for Small Arms	332993	Ammunition (except Small
Arms) Manufacturing

3484	Small Arms	332994	Small Arms Manufacturing

3489	Ordnance and Accessories, NEC	332995	Other Ordnance and Accessories
Manufacturing

3491	Industrial Valves	332911	Industrial Valve Manufacturing

3492	Fluid Power Valves and Hose Fittings	332912	Fluid Power Valve and
Hose Fitting Manufacturing

3493	Steel Springs, Except Wire	332611	Spring (Heavy Gauge)
Manufacturing

3494	Valves and Pipe Fittings, NEC (except metal pipe hangers and
supports)	332919	Other Metal Valve and Pipe Fitting Manufacturing

3494	Valves and Pipe Fittings, NEC (metal pipe hangers and supports)
332999	All Other Miscellaneous Fabricated Metal Product Manufacturing

3495	Wire Springs (clock and watch springs)	334518	Watch, Clock, and
Part Manufacturing

3495	Wire Springs (except watch and clock springs)	332612	Spring (Light
Gauge) Manufacturing

3496	Miscellaneous Fabricated Wire Products (except grocery carts)
332618	Other Fabricated Wire Product Manufacturing

3496	Miscellaneous Fabricated Wire Products (grocery carts)	332924
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

3497	Metal Foil and Leaf (foil and foil containers)	332999	All Other
Miscellaneous Fabricated Metal Product Manufacturing

3497	Metal Foil and Leaf (laminated aluminum foil rolls and sheets for
flexible packaging uses)	322225	Laminated Aluminum Foil Manufacturing
for Flexible Packaging Uses

3498	Fabricated Pipe and Pipe Fittings	332996	Fabricated Pipe and Pipe
Fitting Manufacturing

3499	Fabricated Metal Products, NEC (other metal products)	332999	All
Other Miscellaneous Fabricated Metal Product Manufacturing

3499	Fabricated Metal Products, NEC (metal motor vehicle seat frames)
33636	Motor Vehicle Seating and Interior Trim Manufacturing

3499	Fabricated Metal Products, NEC (metal furniture frames)	337215
Showcase, Partition, Shelving, and Locker Manufacturing

3499	Fabricated Metal Products, NEC (powder metallurgy)	332117	Powder
Metallurgy Part Manufacturing

3499	Fabricated Metal Products, NEC (metal boxes)	332439	Other Metal
Container Manufacturing

3499	Fabricated Metal Products, NEC (safe and vault locks)	33251
Hardware Manufacturing

3499	Fabricated Metal Products, NEC (metal aerosol valves)	332919	Other
Metal Valve and Pipe Fitting Manufacturing

3519	Internal Combustion Engines, NEC (except stationary engine
radiators)	333618	Other Engine Equipment Manufacturing

3519	Internal Combustion Engines, NEC (stationary engine radiators)
336399	All Other Motor Vehicle Parts Manufacturing

3523	Farm Machinery and Equipment (hand hair clippers for animals)
332212	Hand and Edge Tool Manufacturing

3523	Farm Machinery and Equipment (corrals, stalls, and holding gates)
332323	Ornamental and Architectural Metal Work  Manufacturing

3523	Farm Machinery and Equipment (except corrals, stalls, holding
gates, hand clippers for animals, and farm conveyors/elevators)	333111
Farm Machinery and Equipment Manufacturing

3523	Farm Machinery and Equipment (farm conveyors and elevators)	333922
Conveyor and Conveying Equipment Manufacturing

3524	Lawn and Garden Tractors and Home Lawn and Garden Equipment
(nonpowered lawnmowers)	332212	Hand and Edge Tool Manufacturing

3524	Lawn and Garden Tractors and Home Lawn and Garden Equipment (except
nonpowered lawnmowers)	333112	Lawn and Garden Tractor and Home Lawn and
Garden Equipment Manufacturing

3531	Construction Machinery and Equipment (except railway track
maintenance equipment; winches, aerial work platforms; and automotive
wrecker hoists)	33312	Construction Machinery Manufacturing

3531	Construction Machinery and Equipment (winches, aerial work
platforms, and automobile wrecker hoists)	333923	Overhead Traveling
Crane, Hoist, and Monorail System Manufacturing

3531	Construction Machinery and Equipment (railway track maintenance
equipment)	33651	Railroad Rolling Stock Manufacturing

3533	Oil and Gas Field Machinery and Equipment	333132	Oil and Gas Field
Machinery and Equipment Manufacturing

3534	Elevators and Moving Stairways	333921	Elevator and Moving Stairway
Manufacturing

3535	Conveyors and Conveying Equipment	333922	Conveyor and Conveying
Equipment Manufacturing

3536	Overhead Traveling Cranes, Hoists, and Monorail Systems	333923
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

3537	Industrial Trucks, Tractors, Trailers, and Stackers (except metal
pallets and metal air cargo containers)	333924	Industrial Truck,
Tractor, Trailer, and Stacker Machinery Manufacturing

3537	Industrial Trucks, Tractors, Trailers, and Stackers (metal air
cargo containers)	332439	Other Metal Container Manufacturing

3537	Industrial Trucks, Tractors, Trailers, and Stackers (metal pallets)
332999	All Other Miscellaneous Fabricated Metal Product Manufacturing

3541	Machine Tools, Metal Cutting Type	333512	Machine Tool (Metal
Cutting Types) Manufacturing

3544	Special Dies and Tools, Die Sets, Jigs and Fixtures, and Industrial
Molds (except molds)	333514	Special Die and Tool, Die Set, Jig, and
Fixture Manufacturing

3544	Special Dies and Tools, Die Sets, Jigs and Fixtures, and Industrial
Molds (industrial molds)	333511	Industrial Mold Manufacturing

3545	Cutting Tools, Machine Tool Accessories, and Machinists' Precision
Measuring Devices (except precision measuring devices)	333515	Cutting
Tool and Machine Tool Accessory Manufacturing

3545	Cutting Tools, Machine Tools Accessories, and Machinist Precision
Measuring Devices (precision measuring devices)	332212	Hand and Edge
Tool Manufacturing

3549	Metalworking Machinery, NEC	333518	Other Metalworking Machinery
Manufacturing

3553	Woodworking Machinery	33321	Sawmill and Woodworking Machinery
Manufacturing

3554	Paper Industries Machinery	333291	Paper Industry Machinery
Manufacturing

3555	Printing Trades Machinery and Equipment	333293	Printing Machinery
and Equipment Manufacturing

3556	Food Products Machinery	333294	Food Product Machinery Manufacturing

3559	Special Industry Machinery, NEC (semiconductor machinery
manufacturing)	333295	Semiconductor Machinery Manufacturing

3559	Special Industry Machinery, NEC (except rubber and plastics
manufacturing machinery, semiconductor manufacturing machinery, and
automotive maintenance equipment)	333298	All Other Industrial Machinery
Manufacturing

3561	Pumps and Pumping Equipment	333911	Pump and Pumping Equipment
Manufacturing

3562	Ball and Roller Bearings	332991	Ball and Roller Bearing
Manufacturing

3563	Air and Gas Compressors	333912	Air and Gas Compressor Manufacturing


3568	Mechanical Power Transmission Equipment, NEC	333613	Mechanical
Power Transmission Equipment Manufacturing

3579	Office Machines, NEC (time clocks and other time recording devices)
334518	Watch, Clock, and Part Manufacturing

3579	Office Machines, NEC (pencil sharpeners, staplers and other
office equipment)	339942	Lead Pencil and Art Good Manufacturing

3579	Office Machines, NEC (except timeclocks, time stamps, pencil
sharpeners, stapling machines, etc.)	333313	Office Machinery
Manufacturing

3585	Air-Conditioning and Warm Air Heating Equipment and Commercial and
Industrial Refrigeration Equipment (motor vehicle air-conditioning)
336391	Motor Vehicle Air-Conditioning Manufacturing

3595	Air-Conditioning and Warm Air Heating Equipment and Commercial and
Industrial Refrigeration Equipment (except motor vehicle
air-conditioning)	333415	Air-Conditioning and Warm Air Heating Equipment
and Commercial and Industrial Refrigeration Equipment Manufacturing

3592	Carburetors, Pistons, Piston Rings, and Valves	336311	Carburetor,
Piston, Piston Ring, and Valve Manufacturing

3593	Carburetor, Piston, Piston Ring, and Valve Manufacturing	333995
Fluid Power Cylinder and Actuator Manufacturing

3596	Scales and Balances, Except Laboratory	333997	Scale and Balance
(except Laboratory) Manufacturing

3599	Industrial and Commercial Machinery and Equipment, NEC (other
industrial and commercial machinery and equipment)	333999	All Other
Miscellaneous General Purpose Machinery  Manufacturing

3599	Industrial and Commercial Machinery and Equipment, NEC (gasoline,
oil, and intake filters for internal combustion engines, except for
motor vehicles)	336399	All Other Motor Vehicle Parts Manufacturing

3599	Industrial and Commercial Machinery and Equipment, NEC (machine
shops)	33271	Machine Shops

3599	Industrial and Commercial Machinery and Equipment, NEC (flexible
metal hose)	332999	All Other Miscellaneous Fabricated Metal Product
Manufacturing

3599	Industrial and Commercial Machinery and Equipment, NEC (carnival
amusement park equipment)	333319	Other Commercial and Service Industry
Machinery Manufacturing

3612	Power, Distribution, and Speciality Transformers	335311	Power,
Distribution, and Specialty Transformer Manufacturing

3613	Switchgear and Switchboard Apparatus	335313	Switchgear and
Switchboard Apparatus Manufacturing

3624	Carbon and Graphite Products 	335991	Carbon and Graphite Product
Manufacturing

3629	Electrical Industrial Apparatus, NEC	335999	All Other Miscellaneous
Electrical Equipment and Component Manufacturing

3632	Household Refrigerators and Home and Farm Freezers	335222	Household
Refrigerator and Home Freezer Manufacturing

3633	Household Laundry Equipment	335224	Household Laundry Equipment
Manufacturing

3634	Electric Housewares and Fans (electronic cigarette lighters)	339999
All Other Miscellaneous Manufacturing

3634	Electric Housewares and Fans (wall and baseboard heating units for
permanent installation)	333414	Heating Equipment (except Warm Air
Furnaces) Manufacturing

3634	Electric Housewares and Fans (except wall and baseboard heating
units for permanent installation and electronic cigarette lighters)
335211	Electric Housewares and Household Fan Manufacturing

3641	Electric Lamp Bulbs and Tubes	33511	Electric Lamp Bulb and Part
Manufacturing

3643	Current-Carrying Wiring Devices	335931	Current-Carrying Wiring
Device Manufacturing

3644	Noncurrent-Carrying Wiring Devices (except fishwire, electrical
wiring tool)	335932	Noncurrent-Carrying Wiring Device Manufacturing

3644	Noncurrent-Carrying Wiring Devices (fish wire, electrical wiring
tool)	332212	Hand and Edge Tool Manufacturing

3645	Residential Electric Lighting Fixtures	335121	Residential Electric
Lighting Fixture Manufacturing 

3647	Vehicular Lighting Equipment	336321	Vehicular Lighting Equipment
Manufacturing

3651	Household Audio and Video Equipment	33431	Audio and Video Equipment
Manufacturing

3661	Telephone and Telegraph Apparatus (consumer external modems)	334418
Telephone and Telegraph Apparatus (consumer external modems)

3661	Telephone and Telegraph Apparatus (except consumer external modems)
33421	Telephone Apparatus Manufacturing

3671	Electron Tubes	334411	Electron Tube Manufacturing

3672	Printed Circuit Boards	334412	Bare Printed Circuit Board
Manufacturing

3674	Semiconductors and Related Devices	334413	Semiconductor and Related
Device Manufacturing

3675	Electronic Capacitors	334414	Electronic Capacitor Manufacturing

3677	Electronic Coils, Transformers, and Other Inductors	334416
Electronic Coil, Transformer, and Other Inductor Manufacturing

3679	Electronic Components, NEC (printed circuit/electronic assembly
manufacturing)	334418	Telephone and Telegraph Apparatus (consumer
external modems)

3679	Electronic Components, NEC (other electronic components)	334419
Other Electronic Component Manufacturing

3679	Electronic Components, NEC (antennas)	33422	Radio and Television
Broadcasting and Wireless Communications Equipment Manufacturing

3679	Electronic Components, NEC (radio headphones)	33431	Audio and Video
Equipment Manufacturing

3691	Storage Batteries	335911	Storage Battery Manufacturing

3695	Magnetic and Optical Recording Media	334613	Magnetic and Optical
Recording Media Manufacturing

3699	Electrical Machinery, Equipment, and Supplies, NEC (Christmas tree
lighting sets, electric insect lamps, electric fireplace logs, and
trouble lights)	335129	Other Lighting Equipment Manufacturing

3699	Electrical Machinery, Equipment, and Supplies, NEC (other
electrical industrial apparatus)	335999	All Other Miscellaneous
Electrical Equipment and Component Manufacturing

3699	Electrical Machinery, Equipment and Supplies, NEC (electronic
teaching machines and flight simulators)	333319	Other Commercial and
Service Industry Machinery Manufacturing

3711	Motor Vehicles and Passenger Car Bodies (automobiles	336111
Automobile Manufacturing

3711	Motor Vehicles and Passenger Car Bodies (light trucks and utility
vehicles)	336112	Light Truck and Utility Vehicle Manufacturing 

3711	Motor Vehicles and Passenger Car Bodies (heavy duty trucks)	33612
Heavy Duty Truck Manufacturing

3711	Motor Vehicles and Passenger Car Bodies (kit car and other
passenger car bodies)	336211	Motor Vehicle Body Manufacturing

3711	Motor Vehicles and Passenger Car Bodies (military armored vehicles)
336992	Military Armored Vehicle, Tank, and Tank Component Manufacturing

3713	Truck and Bus Bodies	336211	Motor Vehicle Body Manufacturing

3714	Motor Vehicle Parts and Accessories (dump truck lifting mechanisms
and fifth wheels)	336211	Motor Vehicle Body Manufacturing

3714	Motor Vehicle Parts and Accessories (gasoline engines and engine
parts including rebuilt)	336312	Gasoline Engine and Engine Parts
Manufacturing

3714	Motor Vehicle Parts and Accessories (wiring harness sets, other
than ignition; block heaters and battery heaters; instrument board
assemblies; permanent defrosters; windshield washer-wiper mechanisms;
cruise control mechanisms; and other electrical equipment for internal
combustion engines)	336322	Other Motor Vehicle Electrical and Electronic
Equipment Manufacturing

3714	Motor Vehicle Parts and Accessories (steering and suspension parts)
33633	Motor Vehicle Steering and Suspension Components (except Spring)
Manufacturing

3714	Motor Vehicle Parts and Accessories (brake and brake systems,
including assemblies)	33634	Motor Vehicle Brake System Manufacturing

3714	Motor Vehicle Parts and Accessories (transmissions and power train
parts, including rebuilding)	33635	Motor Vehicle Transmission and Power
Train Parts Manufacturing

3714	Motor Vehicle Parts and Accessories (except truck and bus bodies,
trailers, engine and engine parts, motor vehicle electrical and
electronic equipment, motor vehicle steering and suspension components,
motor vehicle brake systems, and motor vehicle transmission and power
train parts) 	336399	All Other Motor Vehicle Parts Manufacturing

3714	Motor Vehicle Parts and Accessories (dump truck lifting mechanisms
and fifth wheels)	336211	Motor Vehicle Body Manufacturing

3715	Truck Trailers	336212	Truck Trailer Manufacturing

3716	Motor Homes	336213	Motor Home Manufacturing

3721	Aircraft (except research and development)	336411	Aircraft
Manufacturing

3721	Aircraft (research and development)	54171	Research and Development
in the Physical, Engineering, and Life Sciences

3724	Aircraft Engines and Engine Parts (except research and development
336412	Aircraft Engine and Engine Parts Manufacturing

3724	Aircraft Engines and Engine Parts (research and development)	54171
Research and Development in the Physical, Engineering, and Life Sciences

3728	Aircraft Parts and Auxiliary Equipment, NEC (except fluid power
aircraft subassemblies, target drones, and research and development)
336413	Other Aircraft Parts and Auxiliary Equipment Manufacturing

3728	Aircraft Parts and Auxiliary Equipment, NEC (research and
development)	54171	Research and Development in the Physical,
Engineering, and Life Sciences

3728	Aircraft Parts and Auxiliary Equipment, NEC (fluid power aircraft
subassemblies)	332912	Fluid Power Valve and Hose Fitting Manufacturing

3728	Aircraft Parts and Auxiliary Equipment, NEC (target drones)	336411
Aircraft Manufacturing

3732	Boat Building and Repairing (boat building)	336612	Boat Building 

3732	Boat Building and Repairing (pleasure boat repair)	81149	Other
Personal and Household Goods Repair and Maintenance

3751	Motorcycles, Bicycles and Parts	336991	Motorcycle, Bicycle, and
Parts Manufacturing

3761	Guided missiles and Space Vehicles (research and development)	54171
Research and Development in the Physical, Engineering, and Life Sciences

3761	Guided Missiles and Space Vehicles (except research and development
336414	Guided Missile and Space Vehicle Manufacturing

3764	Guided missile and Space Vehicle Propulsion Units and Propulsion
Unit Parts (research and development)	54171	Research and Development in
the Physical, Engineering, and Life Sciences

3764	Guided Missile and Space Vehicle Propulsion Units and Propulsion
Unit Parts (except research and development)	336415	Guided Missile and
Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

3792	Travel Trailers and Campers	336214	Travel Trailer and Camper
Manufacturing

3799	Transportation Equipment, NEC (automobile, boat, utility and light
truck trailers)	336214	Travel Trailer and Camper Manufacturing

3799	Transportation Equipment, NEC (trailer hitches)	336399	All Other
Motor Vehicle Parts Manufacturing

3799	Transportation Equipment, NEC (except automobile, boat, utility
light truck trailers, trailer hitches, and wheelbarrows)	336999	All
Other Transportation Equipment Manufacturing

3799	Transportation Equipment, NEC (wheelbarrows)	333924	Industrial
Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

3812	Search, Detection, Navigation, Guidance, Aeronautical, and Nautical
Systems and Instruments	334511	Search, Detection, Navigation, Guidance,
Aeronautical, and  Nautical System and Instrument Manufacturing

3821	Laboratory Apparatus and Furniture	339111	Laboratory Apparatus and
Furniture Manufacturing

3822	Automatic Controls for Regulating Residential and Commercial
Environments and Appliances	334512	Automatic Environmental Control
Manufacturing for Residential, Commercial, and Appliance Use

3827	Optical Instruments and Lenses	333314	Optical Instrument and Lens
Manufacturing

3829	Measuring and Controlling Devices, NEC (motor vehicle gauges)
334514	Totalizing Fluid Meter and Counting Device Manufacturing

3829	Measuring and Controlling Devices, NEC (electronic chronometers)
334518	Watch, Clock, and Part Manufacturing

3829	Measuring and Controlling Devices, NEC (except medical
thermometers, electronic chronometers and motor vehicle gauges)	334519
Other Measuring and Controlling Device Manufacturing

3829	Measuring and Controlling Devices, NEC (medical thermometers)
339112	Surgical and Medical Instrument Manufacturing

3841	Surgical and Medical Instruments and Apparatus (operating tables)
339111	Laboratory Apparatus and Furniture Manufacturing

3841	Surgical and Medical Instruments and Apparatus (except tranquilizer
guns and operating tables)	339112	Surgical and Medical Instrument
Manufacturing

3841	Surgical and Medical Instruments and Apparatus (tranquilizer guns)
332954	Small Arms Manufacturing

3842	Orthopedic, Prosthetic, and Surgical Appliances and Supplies
(except electronic hearing aids)	339113	Surgical Appliance and Supplies
Manufacturing

3842	Orthopedic, Prosthetic, and Surgical Appliances and Supplies
(incontinent and bed pads)	322291	Sanitary Paper Product Manufacturing

3842	Orthopedic, Prosthetic and Surgical Appliances and Supplies
(electronic hearing aids)	334510	Electromedical and Electrotherapeutic
Apparatus Manufacturing

3851	Ophthalmic Goods (intra ocular lenses)	339113	Surgical Appliance
and Supplies Manufacturing

3851	Ophthalmic Goods (except intra ocular lenses)	339115	Ophthalmic
Goods Manufacturing

3861	Ophthalmic Goods Manufacturing	325992	Photographic Film, Paper,
Plate, and Chemical Manufacturing

3861	Photographic Equipment and Supplies (except photographic film,
paper, plates, and chemicals)	333315	Photographic and Photocopying
Equipment Manufacturing

3873	Watches, Clocks, Clockwork Operated Devices, and Parts	334518
Watch, Clock, and Part Manufacturing

3914	Silverware, Plated Ware, and Stainless Steel Ware (except 
nonprecious and precious plated metal cutlery and flatware)	339912
Silverware and Hollowware Manufacturing

3914	Silverware, Plated Ware, and Stainless Steel Ware (cutlery and
flatware, nonprecious and precious plated)	332211	Cutlery and Flatware
(except Precious) Manufacturing

3914	Silverware, Plated Ware, and Stainless Steel Ware (precious plated
hollowware)	332999	All Other Miscellaneous Fabricated Metal Product
Manufacturing

3931	Musical Instruments	339992	Musical Instrument Manufacturing

3949	Sporting and Athletic Goods, NEC	33992	Sporting and Athletic Goods
Manufacturing

3951	Pens, Mechanical Pencils, and Parts 	339941	Pen and Mechanical
Pencil Manufacturing

3993	Signs and Advertising Specialties (signs)	33995	Sign Manufacturing

3995	Burial Caskets	339995	Burial Casket Manufacturing

3996	Linoleum, Asphalted-Felt-Base, and Other Hard Surface Floor
Coverings, NEC	326192	Resilient Floor Covering Manufacturing

3999	Manufacturing Industries, NEC (plastics products such as combs,
hair curlers, etc.)	326199	All Other Plastics Product Manufacturing

3999	Manufacturing Industries, NEC (human hair clippers, hand operated)
332211	Cutlery and Flatware (except Precious) Manufacturing

3999	Manufacturing Industries, NEC (tape measures)	332212	Hand and Edge
Tool Manufacturing

3999	Manufacturing Industries, NEC (other miscellaneous metal products,
such as combs, hair curlers, etc.)	332999	All Other Miscellaneous
Fabricated Metal Product Manufacturing

3999	Manufacturing Industries, NEC (beauty and barber shop equipment,
except chairs)	333319	Other Commercial and Service Industry Machinery
Manufacturing

3999	Manufacturing Industries, NEC (lamp shades of paper or textile)
335121	Residential Electric Lighting Fixture Manufacturing 

3999	Manufacturing Industries, NEC (electric hair clippers for humans)
335211	Electric Housewares and Household Fan Manufacturing

3999	Manufacturing Industries, NEC (beauty and barber chairs)	337127
Institutional Furniture Manufacturing

3999	Manufacturing Industries, NEC (embroidery kits)	339932	Game, Toy,
and Children's Vehicle Manufacturing

3999	Manufacturing Industries, NEC (other miscellaneous products not
specially provided for previously) 	339999	All Other Miscellaneous
Manufacturing

3999	Manufacturing Industries, NEC (fur dressing and finishing)	31611
Leather and Hide Tanning and Finishing

3999	Manufacturing Industries, NEC (matches)	325998	All Other
Miscellaneous Chemical Product and Preparation Manufacturing

4226	Special Warehousing and Storage, NEC (warehousing in foreign trade
zones)	49311	General  Warehousing and Storage

4226	Special Warehousing and Storage, NEC (fur storage)	49312
Refrigerated Warehousing and Storage

4226	Special Warehousing and Storage, NEC (all but fur storage and
warehousing in foreign trade zones)	49319	Other Warehousing and Storage

4512	Air Transportation, Scheduled (passenger)	481111	Scheduled
Passenger Air Transportation

4512	Air Transportation, Scheduled (freight)	481112	Scheduled Freight
Air Transportation

4581	Airports, Flying Fields, and Airport Terminal Services (private air
traffic control)	488111	Air Traffic Control

4581	Airports, Flying Fields, and Airport Terminal Services (airfreight
handling at airports, hangar operations, airport terminal services,
aircraft storage, airports, and flying fields)	488119	Other Airport
Operations

4581	Airports, Flying Fields, and Airport Terminal Services (aircraft
servicing and repairing	48819	Other Support Activities for Air
Transportation

4581	Airports, Flying Fields, and Airport Terminal Services (airplane
cleaning and janitorial services)	56172	Janitorial Services

4612	Crude Petroleum Pipelines	48611	Pipeline Transportation of Crude
Oil

4613	Refined Petroleum Pipelines	48691	Pipeline Transportation of
Refined

4789	Transportation Services, NEC (horse-drawn cabs and carriages)	48711
Scenic and Sightseeing Transportation, Land

4789	Transportation Services, NEC (car loading and unloading;
cleaning of railroad ballasts; dining, parlor, sleeping, and other car
operations; and railroad maintenance	48821	Support Activities for Rail
Transportation

4789	Transportation Services, NEC (pipeline terminals and stockyards for
transportation)	488999	All Other Support Activities for Transportation

4789	Transportation Services, NEC (dining car operations on a fee or
contract basis)	72231	Food Service Contractors

4911	Electric Services (hydroelectric power generation)	221111
Hydroelectric Power Generation

4911	Electric Services (fossil fuel power generation)	221112	Fossil Fuel
Electric Power Generation

4911	Electric Services (nuclear electric power generation)	221113
Nuclear Electric Power Generation

4911	Electric Services (other electric power generation)	221119	Other
Electric Power Generation

4911	Electric Services (electric power distribution)	221122	Electric
Power Distribution

4911	Electric Services (electric power transmission and control)	221121
Electric Bulk Power Transmission and Control

4922	Natural Gas Transmission	48621	Pipeline Transportation of Natural
Gas

4925	Mixed, Manufactured, or Liquefied Petroleum Gas Production and/or
Distribution	22121	Natural Gas Distribution

4931	Electric and Other Services Combined (natural gas distribution)
22121	Natural Gas Distribution

4931	Electric and Other Services Combined (hydroelectric power
generation) 	221111	Hydroelectric Power Generation

4931	Electric and Other Services Combined (fossil fuel power generation)
221112	Fossil Fuel Electric Power Generation

4931	Electric and Other Services Combined (nuclear power generation)
221113	Nuclear Electric Power Generation

4931	Electric and Other Services Combined (other electric power
generation)	221119	Other Electric Power Generation

4931	Electric and Other Services Combined (electric power transmission
and control)	221121	Electric Bulk Power Transmission and Control

4931	Electric and Other Services Combined (electric power distribution)
221122	Electric Power Distribution

4952	Sewerage Systems	22132	Sewage Treatment Facilities

4953	Refuse Systems (hazardous waste treatment and disposal)	562211
Hazardous Waste Treatment and Disposal

4953	Refuse Systems (solid waste landfills)	562212	Solid Waste Landfill

4953	Refuse Systems (solid waste combustors and incinerators)	562213
Solid Waste Combustors and Incinerators

4953	Refuse Systems (other nonhazardous waste treatment and disposal)
562219	Other Nonhazardous Waste Treatment and Disposal

4953	Refuse Systems (materials recovery facilities)	56292	Materials
Recovery Facilities

4961	Steam and Air-Conditioning Supply	22133	Steam and Air-Conditioning
Supply

5032	Brick, Stone, and Related Construction Materials  (except
construction materials sold via retail method)	42132	Brick, Stone, and
Related Construction Material Wholesalers

5032	Brick, Stone, and Related Construction Materials (Wholesale) (sold
via retail method)	44419	Other Building Material Dealers

5032	Brick, Stone, and Related Construction Materials  (except
construction materials sold via retail method)	42132	Brick, Stone, and
Related Construction Material Wholesalers

5032	Brick, Stone, and Related Construction Materials (Wholesale) (sold
via retail method)	44419	Other Building Material Dealers

5051	Metals Service Centers and Offices 	42151	Metals Service Centers
and Offices

5087	Service Establishment Equipment and Supplies (beauty and barber
shop equipment and supplies sold via retail method)	44612	Cosmetics,
Beauty Supplies, and Perfume Stores

5087	Service Establishment Equipment and Supplies (except sales of the
service establishment equipment and supplies sold via retail method)
42185	Service Establishment Equipment and Supplies Wholesalers

5088	Transportation Equipment and Supplies, Except Motor Vehicles	42186
Transportation Equipment and Supplies (except Motor Vehicle) Wholesalers

5093	Scrap and Waste Materials 	42193	Recyclable Material Wholesalers

5145	Confectionery	42245	Confectionery Wholesalers

5171	Petroleum Bulk Stations and Terminals (except  petroleum sold via
retail method)	42271	Petroleum Bulk Stations and Terminals

5171	Petroleum Bulk Stations and Terminals (heating oil sold to final
consumer)	454311	Heating Oil Dealers

5171	Petroleum Bulk Stations and Terminals (LP gas sold to final
consumer)	454312	Liquefied Petroleum Gas (Bottled Gas) Dealers

5171	Petroleum Bulk Stations and Terminals (except  petroleum sold via
retail method)	42271	Petroleum Bulk Stations and Terminals

5172	Petroleum and Petroleum Products Wholesalers, Except Bulk Stations
and Terminals	42272	Petroleum and Petroleum Products Wholesalers (except
Bulk Stations and Terminals)

5192	Books, Periodicals, and Newspapers	42292	Book, Periodical, and
Newspaper Wholesalers

5211	Lumber and Other Building Materials Dealers (home center stores)
44411	Home Centers

5211	Lumber and Other Building Materials Dealers (except home centers)
44419	Other Building Material Dealers

5712	Furniture Stores (custom wood cabinets)	33711	Wood Kitchen Cabinet
and Countertop Manufacturing

5712	Furniture (custom made upholstered household furniture except
cabinets)	337121	Upholstered Household Furniture Manufacturing

5712	Furniture Stores (custom made wood nonupholstered household
furniture except cabinets)	337122	Nonupholstered Wood Household
Furniture Manufacturing

5712	Furniture Stores (except custom furniture and cabinets)	44211
Furniture Stores

6035	Savings Institutions, Federally Chartered	52212	Savings
Institutions

6553	Cemetery Subdividers and Developers	81222	Cemeteries and
Crematories

7211	Power Laundries, Family and Commercial	81232	Drycleaning and
Laundry Services (except Coin-Operated)

7216	Drycleaning Plants, Except Rug Cleaning	81232	Drycleaning and
Laundry Services (except Coin-Operated)

7261	Funeral Services and Crematories (funeral homes and services)	81221
Funeral Homes and Funeral Services

7261	Funeral Services and Crematories (crematories)	81222	Cemeteries and
Crematories

7379	Computer Related Services, NEC (disk and diskette conversion and
recertification)	51421	Data Processing Services 

7379	Computer Related Services, NEC (computer systems consultants)
541512	Computer Systems Design Services

7379	Computer Related Services, NEC (except computer systems consultants
and disk and diskette conversion and recertification)	541519	Other
Computer Related Services

7384	Photofinishing Laboratories (except one-hour)	812921	Photofinishing
Laboratories (except One-Hour)

7384	Photofinishing Laboratories (one-hour)	812922	One-Hour
Photofinishing

7521	Automobile Parking	81293	Parking Lots and Garages

7539	Automotive Repair Shops, NEC	811118	Other Automotive Mechanical and
Electrical Repair and Maintenance

7699	Repair Shops and Related Services, NEC (camera repair)	811211
Consumer Electronics Repair and Maintenance

7699	Repair Shops and Related Services, NEC (typewriter repair)	811212
Computer and Office Machine Repair and Maintenance

7699	Repair Shops and Related Services, NEC (dental instrument repair,
laboratory instrument repair, medical equipment and other electronic and
precision equipment repair, except typewriters)	811219	Other Electronic
and Precision Equipment Repair and Maintenance

7699	Repair Shops and Related Services, NEC (other non-automotive
transportation equipment and industrial machines and equipment	81131
Commercial and Industrial Machinery and Equipment (except Automotive and
Electronic) Repair and Maintenance

7699	Repair Shops and Related Services, NEC (lawnmower repair shops,
sharpening and repairing knives, saws and tools)	811411	Home and Garden
Equipment Repair and Maintenance

7699	Repair Shops and Related Services, NEC (gas appliance repair
service, sewing machine repair, stove repair shops, and other
non-electrical appliance)	811412	Appliance Repair and Maintenance

7699	Repair Shops and Related Services (leather goods repair shops,
luggage repair shops, pocketbook repair shops)	81143	Footwear and
Leather Goods Repair

7699	Repair Shops and Related Services, NEC (except industrial,
electronic, home and garden, appliance, and leather goods)	81149	Other
Personal and Household Goods Repair and Maintenance

7699	Repair Services, NEC (farriers)	11521	Support Activities for Animal
Production

7699	Repair Shops and Related Services (boiler cleaning)	23511	Plumbing,
Heating, and Air-Conditioning Contractors

7699	Repair Shops and Related Services, NEC (custom picture framing)
442299	All Other Home Furnishings Stores

7699	Repair Shops and Related Services, NEC (retailing new bicycles from
a storefront and repairing bicycles)	45111	Sporting Goods Stores

7699	Repair Shops and Related Services, NEC (ship scaling) 	48839	Other
Support Activities for Water Transportation

7699	Repair Shops and Related Services, NEC (locksmith shops)	561622
Locksmiths

7699	Repair Shops and Related Services, NEC (furnace, duct, chimney,
gutter, and drain cleaning services)	56179	Other Services to Buildings
and Dwellings

7699	Repair Shops and Related Services, NEC (cesspool and septic tank
cleaning)	562991	Septic Tank and Related Services

7699	Repair Shops and Related Services, NEC (sewer cleaning and rodding)
562998	All Other Miscellaneous Waste Management Services

7699	Repair Shops and Related Services, NEC (taxidermists and antique
repair and restoration, except antique car restoration)	71151
Independent Artists, Writers, and Performers

7819	Services Allied to Motion Picture Production (reproduction of
video)	334612	Prerecorded Compact Disc (except Software), Tape, and
Record Reproducing

7819	Services Allied to Motion Picture Production (teleproduction and
postproduction services)	512191	Teleproduction and Other Postproduction 
Services

7819	Services Allied to Motion Picture Production (except casting
bureaus, wardrobe and equipment rental, talent payment services,
teleproduction and other postproduction services, reproduction of
videos, and film distributors and other related motion picture
production services)	512199	Other  Motion Picture and Video Industries

7819	Services Allied to Motion Picture Production (wardrobe rental for
motion picture film production)	53222	Formal Wear and Costume Rental

7819	Services Allied to Motion Picture Production (motion picture
equipment rental)	53249	Other Commercial and Industrial Machinery and
Equipment Rental and Leasing

7819	Services Allied to Motion Picture Production (talent payment
services)	541214	Payroll Services

7819	Services Allied to Motion Picture Production (casting bureaus)
56131	Employment Placement Agencies

7819	Services Allied to Motion Picture Production (film directors and
related motion picture production services, independent)	71151
Independent Artists, Writers, and Performers

8059	Nursing and Personal Care Facilities, NEC (except continuing care
retirement communities)	62311	Nursing Care Facilities

8059	Nursing and Personal Care Facilities, NEC (continuing care
retirement communities)	623311	Continuing Care Retirement Communities 

8062	General Medical and Surgical Hospitals	62211	General Medical and
Surgical Hospitals

8221	Colleges, Universities, and Professional Schools	61131	Colleges,
Universities, and Professional Schools

8734	Testing Laboratories (except veterinary testing laboratories)	54138
Testing Laboratories

88734	Testing Laboratories (veterinary testing laboratories)	54194
Veterinary Services

9199	General Government, NEC	92119	Other General Government Support

9661	Space Research and Technology	92711	Space Research and Technology

9711	National Security	92811	National Security

9999	could not find





 PAGE  4 

