API Section 211(B) Tier-2 Exposure Database

The data have been organized into four data files (API
Data_Continuous.xls, API Data_SPME.xls, API Data_Time-integrated.xls and
API Data_Reconstructed.xls) containing the continuous, SPME,
time-integrated and reconstructed exposure data. All files include data
fields describing the sample collection conditions (e.g.;
microenvironment, fuel type, test mode) as well as data flags indicating
problems with the analytical or sample collection methods. Tables
explaining the meaning of each data field are also included with each
file. The files are supplied in Excel workbook format for convenience,
but have been formatted to be compatible with common database software
(the value -99 is used for missing data points, and time is in hhmm text
format)

The time-integrated data contains speciation results from canister, DNPH
cartridge, and TENAX adsorbant tubes, plus time-averaged values of
pollutants and environmental parameters that were measured continuously
during the batch sample collection periods. Within the time-integrated
data file there are 4 sub-categories that are presented separately due
to the differing number of experimental variables for each type: 1)
microenvironment exposure measurements from the three cities, 2) breath
samples collected from subjects participating in 4 of the
microenvironments, 3) residence with attached garage, and 4) trailing
vehicle exposure tests. 

The SPME data is assembled in essentially the same manner as the
time-integrated data, but contains only the BTEX hydrocarbon compounds
and uses some different sample descriptors where necessary to identify
which portion of each test the sample was collected during. The same
sample IDs are used to facilitate comparison of the two sampling
methods.

The third data file contains 1-minute averages of the pollutants and
environmental parameters that were measured continuously during the
microenvironment exposure tests in the 3 cities. Data were typically
logged every 10 seconds during testing, but to reduce measurement noise,
make the data set more manageable, and reduce the effect of minor timing
discrepancies between instruments due to imperfect clock synchronization
or differences in sample line residence time, the data was time averaged
by minute. Each data record in this file has both a time/date stamp and
an identification code that relates it to the corresponding
time-integrated sample. Data flags are given to identify any missing or
invalid data for each minute. Due to the large size of this file, the
various sample descriptors have not been included but these can be
derived from the identification code as described in the included key.

The fourth file contains 1-min reconstructed data for benzene,
1,3-butadiane and formaldehyde based on PID and NDIR CO continuous data,
as described in Chapter 1 of this report.  Both full time canister and
DNPH-carbonyl samples and 5-min canister samples collected over a peak
exposure in selected MEs are included.

Table G-1 contains the key to the name of the samples collected during
this study.Table G-1. Naming convention for the API data

Experiment	Position







Type	1st Location	2nd  Season	3rd + 4th 	5th    Mode	6th 	7th  	8th 

ME-Atlanta	A	S-Summer

W-winter	ME number (01, etc)	M-main

P- 5 min 

B-breath	Under score	Replicate number	Breath: A-pre; B-peak, C-post

ME-Chicago	C	S-Summer

W-winter	ME number	M-main

P- 5 min 

B-breath	Under score	Replicate number	Breath: A-pre; B-peak, C-post

ME-Houston	H	S-Summer

W-winter	ME number	M-main

P- 5 min 

B-breath	Under score	Replicate number	Breath: A-pre; B-peak, C-post; NOx
denuder: D

trailing Vehicle	V	S-Summer

W-winter	Fuel (a,c,h) +  vehicle (t-truck, s-sedan)	MalFunction (F)

Normal (N)	Under score	High (H), Low (L) vent, or coMbined (m)
Background –A; Main-B; Idle-C

Residence w/attached garage	R	S-Summer

W-winter	Fuel (a,c,h) +  vehicle (t-truck, s-sedan)	MalFunction (F)

Normal (N)	Under score	Kichen (K) or Garage(G) location	Background: A;
Main - B



For example: AS02M_1 means Atlanta, summer, ME#2, first replicate. 
HW11B_3B means Houston, winter, ME#11, breath sample, peak

VWasN_HC means trailing vehicle, winter, Atlanta fuel, sedan, normal
mode, high vent, idle.  RSctF_KA means garage, summer, Chicago fuel,
truck, malfunction, kitchen, background

