
[Federal Register Volume 80, Number 91 (Tuesday, May 12, 2015)]
[Notices]
[Page 27231]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-11428]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION


Intelligent Transportation Systems Connected Vehicle Reference 
Implementation Architecture Workshop; Notice of Public Meeting

AGENCY: ITS Joint Program Office, Office of the Assistant Secretary for 
Research and Technology, U.S. Department of Transportation.

ACTION: Notice.

-----------------------------------------------------------------------

    In continuation of ITS Connected Vehicle Reference Implementation 
Architecture (CVRIA) efforts, the U.S. Department of Transportation 
(USDOT) Intelligent Transportation System Joint Program Office (ITS 
JPO) will present and seek input on the latest results of its Connected 
Vehicle architecture developments and standards analysis at a workshop 
in Cambridge, Massachusetts, June 10-12, 2015.
    The event will be held at Draper Laboratory, located in the Kendall 
Square technology innovation area, and near USDOT's Volpe National 
Transportation Systems Center. The event will be presented in two 
parts:
     June 10: A training session on:
    [cir] The CVRIA, a consistent framework to guide the planning and 
deployment of connected vehicle technologies. The architecture 
identifies options for interoperable deployment of technologies from an 
enterprise, physical, logical, and communications perspective. It also 
facilitates the ability of jurisdictions to operate collaboratively and 
to harness the benefits of a regional approach to transportation 
challenges.
    [cir] The Systems Engineering Tool for Intelligent Transportation 
(SET-IT) Version 1.1, which allows implementers and decision makers to 
develop their own architectures for deployment.
    Both are available at: http://www.its.dot.gov/arch/index.htm and 
www.iteris.com/cvria.
     June 11-12: A workshop that will provide implementers and 
decision makers with:
    [cir] An update on the changes to CVRIA and SET-IT as they move 
toward the release of version 2.0 in late June 2015.
    [cir] An update on the standards analysis that was performed using 
the CVRIA to identify interfaces that are candidates for 
standardization.
    To register for the CVRIA workshop, please visit: www.itsa.org/cvriaregistration.
    For further information, please contact Carlos Alban, 
Transportation Program Specialist, Intelligent Transportation Society 
of America, 1100 New Jersey Ave. SE., Suite 850 Washington, DC 20003, 
202-721-4223, calban@itsa.org.
    Updates will be available on the ITS Program Web site at: http://www.its.dot.gov/ under Press Room: Public Meetings and Events, and on 
the ITS Standards Web site at: http://www.standards.its.dot.gov/DevelopmentActivities/CVReference.

SUPPLEMENTARY INFORMATION: The CVRIA training will be conducted on 
Wednesday, June 10, 2015 from 9:00-16:00. The workshop will be 
conducted on Thursday, June 11, 2015 from 9:00-16:30 and on Friday, 
June 12, 2015 from 9:00-13:00. It will take place at Draper Laboratory, 
555 Technology Square, Cambridge, MA 02139. Directions to Kendall 
Square, local hotel options, and information for access to Draper 
Laboratory will be provided to registrants.
    As the results of the CVRIA, interface analysis, and 
standardization efforts are expected to affect a wide range of public 
and private organizations, it is important that the analyses 
incorporate, as appropriate, the needs and requirements of the CV 
community. This workshop is an appropriate opportunity for external 
stakeholders to engage in the standards discussion.

    Issued in Washington, DC, on the 7th day of May 2015.
Stephen Glasscock,
Program Analyst, ITS Joint Program Office.
[FR Doc. 2015-11428 Filed 5-11-15; 8:45 am]
 BILLING CODE 4910-22-P


