
[Federal Register Volume 79, Number 242 (Wednesday, December 17, 2014)]
[Rules and Regulations]
[Pages 75044-75046]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-29450]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Bureau of Industry and Security

15 CFR Parts 744 and 774

[Docket No. 140813667-4667-01]
RIN 0694-AG27


Expansion of the Microprocessor Military End-Use and End-User 
Control

AGENCY: Bureau of Industry and Security, Commerce.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The Bureau of Industry and Security (BIS) is amending the 
microprocessor military end-use and end-user control in the Export 
Administration Regulations by expanding the scope of microprocessors 
subject to the restriction to harmonize with technological advances to 
microprocessor chips and expand the scope to include related software 
and technology for the development and production of these chips. In 
addition, this rule adds a prohibition on the use of license exceptions 
(including License Exception ENC) and otherwise expands license 
requirements for exports, reexports, or transfers (in-country) of 
microprocessors subject to the military end-use and end-user 
restriction. This expansion is consistent with the foreign policy 
objectives of the United States of preventing U.S. exports that might 
contribute to destabilizing military capabilities against the United 
States and its citizens. The foreign policy report explaining the 
expansion was sent to Congress on December 1, 2014. This rule also 
expands the scope of controls to cover in-country transfers, in order 
to control in-country transfers to prohibited military end users or end 
uses. BIS is also making editorial and format revisions to this section 
to improve clarity.

DATES: Effective date: This rule is effective December 17, 2014.

FOR FURTHER INFORMATION CONTACT: Sharron Cook, Office of Exporter 
Services, Bureau of Industry and Security, Department of Commerce, 
Phone: (202) 482-2440 or by email at Sharron.cook@bis.doc.gov.

SUPPLEMENTARY INFORMATION:

Background

    On January 14, 2003 (68 FR 1796), the Bureau of Industry and 
Security (BIS) published a rule to implement the microprocessor 
military end-user and end-use control in Sec.  744.17 of the Export 
Administration Regulations (EAR). That rule imposed an end-use and end-
user based license requirement on the export of certain microprocessors 
to military end uses and end users in countries in Country Group D:1 
(see Supplement No. 1 to part 740 of the EAR).
    End-use and end-user based controls are in addition to any controls 
based on the technical parameters of the item. Thus, the end-use and 
end-user based license requirements set forth in Sec.  744.17 may apply 
to a transaction, even if the Commerce Country Chart indicates there 
are no license requirements, i.e., no ``X'' in the box. When controls 
set forth under more than one section of the EAR apply to a 
transaction, the license requirements for such a transaction will be 
determined based on the requirements of all applicable sections of the 
EAR, and license applications will be reviewed under all applicable 
licensing policies.
    To determine license requirements, one should follow the decision 
tree flowchart in Supplement No. 1 to part 732. An ECCN may have 
multiple license requirements, e.g., CCL-based, end-use based, or end-
user based. Also note that to use a license exception, each license 
requirement on an ECCN must be overcome.

Revisions to Sec.  744.17 ``Restrictions on Certain Exports, Reexports 
and Transfers (in-country) of Microprocessors and Associated 
``Software'' and ``Technology'' for `Military End Uses' and to 
`Military End Users'''

    Since 744.17 was established, BIS's administration of export 
controls has increasingly focused on end uses and end users. Consistent 
with this change, BIS is adding in-country transfer controls to this 
section of the EAR to incorporate restrictions that would apply even if 
a transaction is licensed for a particular destination.
    BIS is also expanding the scope of microprocessors requiring a 
license under Sec.  744.17 by removing the specific ECCN (3A991.a.1) 
from the text, so that the prohibition applies to any microprocessor 
meeting the specified performance criteria, and associated ``software'' 
and ``technology.'' As encryption and other ``information security'' 
functionality has become more commonplace in hardware, BIS has 
concluded that microprocessors classified under any ECCN in Category 
5--Part 2 of the EAR (including ECCN 5A992.c for `mass market' 
encryption chips and ECCN 5A002 for a variety of non-`mass market' 
microprocessors) warrant the same license requirement as BIS currently 
requires under Sec.  744.17 for the microprocessors classified outside 
of Category 5--Part 2, even if no license would be required (NLR) or 
License Exception ENC would otherwise be available. Because of this 
scope revision, the first sentence of paragraph (a) is revised to 
clarify that this license requirement is in addition to all license 
requirements set forth in the EAR and not just anti-terrorism reasons 
for control. Furthermore, BIS is expanding the scope of the license 
requirement in Sec.  744.17 to include ``technology'' and ``software'' 
for the ``development'' and ``production'' of the microprocessors 
described in Sec.  744.17(a).
    In relation to Sec.  744.17(f) ``Exceptions,'' BIS is also moving, 
from paragraph (a) to paragraph (f), text that exempted from Sec.  
744.17 personnel and agencies of the U.S. Government or agencies of a 
cooperating government under License Exception GOV. In

[[Page 75045]]

addition to harmonizing Sec.  744.17(f) with recent changes in License 
Exception GOV, BIS is expanding paragraph (f) to include exports, 
reexports and transfers (in-country) ``on behalf of'' the U.S. 
Government or agencies of a cooperating government and updating and 
incorporating the related citation references.
    BIS is also fixing the use of double and single quotes around the 
terms in this section to increase clarity. Single quotes are used for 
terms that are defined in a section where it appears, whereas double 
quotes indicate a term defined in Sec.  772.1 of the EAR.

Revisions to the Supplement No. 1 to Part 774 ``Commerce Control List''

    This rule adds a reference to the license requirements in Sec.  
744.17 in the affected ECCNs of the Commerce Control List. 
Specifically, ECCNs 3A001, 3D002, 3D991, 3E001, 3E002, 3E991, 5A002, 
5A992, 5D002, 5D992, 5E002 and 5E992 are amended by adding a License 
Requirement Note after the Control Table in the License Requirements 
section. This reference in the ECCN may help prevent exporters from 
missing this combination item/end-use based license requirement.
    ECCN 3A991 already had a license requirement note pointing to the 
license requirements in Sec.  744.17. This rule replaces the existing 
note with the same one being added to the other twelve ECCNs in this 
rule.

Export Administration Act

    Although the Export Administration Act expired on August 20, 2001, 
the President, through Executive Order 13222 of August 17, 2001, 3 CFR, 
2001 Comp., p. 783 (2002), as amended by Executive Order 13637 of March 
8, 2013, 78 FR 16129 (March 13, 2013) and as extended by the Notice of 
August 7, 2014, 79 FR 46957 (August 11, 2014), has continued the Export 
Administration Regulations in effect under the International Emergency 
Economic Powers Act. BIS continues to carry out the provisions of the 
Export Administration Act, as appropriate and to the extent permitted 
by law, pursuant to Executive Order 13222 as amended by Executive Order 
13637.

Savings Clause

    Shipments of items removed from license exception eligibility or 
eligibility for export, reexport, or transfer (in-country) without a 
license as a result of this regulatory action that were on dock for 
loading, on lighter, laden aboard a carrier, or en route aboard a 
carrier to a port, on December 17, 2014, pursuant to actual orders to a 
destination, may proceed to that destination under the previous license 
exception eligibility or without a license so long as they have been 
exported, reexported, or transferred (in-country) before February 17, 
2015. Any such items not actually exported, reexported, or transferred 
(in-country) before midnight, on February 17, 2015, require a license 
in accordance with this regulation.

Rulemaking Requirements

    1. Executive Orders 13563 and 12866 direct agencies to assess all 
costs and benefits of available regulatory alternatives and, if 
regulation is necessary, to select regulatory approaches that maximize 
net benefits (including potential economic, environmental, public 
health and safety effects, distributive impacts, and equity). Executive 
Order 13563 emphasizes the importance of quantifying both costs and 
benefits, of reducing costs, of harmonizing rules, and of promoting 
flexibility. This rule has been determined to be not significant for 
purposes of Executive Order 12866.
    2. Notwithstanding any other provision of law, no person is 
required to respond to nor be subject to a penalty for failure to 
comply with a collection of information, subject to the requirements of 
the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.) (PRA), 
unless that collection of information displays a currently valid Office 
of Management and Budget (OMB) Control Number. This regulation involves 
collections previously approved by OMB under control number 0694-0088, 
Simplified Network Application Processing System, which includes, among 
other things, license applications and carries a burden estimate of 
43.8 minutes for a manual or electronic submission. Total burden hours 
associated with the PRA and OMB control number 0694-0088 are not 
expected to increase as a result of this rule. You may send comments 
regarding the collection of information associated with this rule, 
including suggestions for reducing the burden, to Jasmeet K. Seehra, 
Office of Management and Budget (OMB), by email to 
Jasmeet_K._Seehra@omb.eop.gov, or by fax to (202) 395-7285.
    3. This rule does not contain policies with Federalism implications 
as that term is defined in Executive Order 13132.
    4. The provisions of the Administrative Procedure Act (5 U.S.C. 
553) requiring notice of proposed rulemaking, the opportunity for 
public comment and a delay in effective date are inapplicable because 
this regulation involves a military or foreign affairs function of the 
United States. (See 5 U.S.C. 553(a)(1)). If this rule were delayed to 
allow for notice and comment and a delay in effective date, these high 
performance microprocessors, as well as associated development and 
production technology and software would continue to be exported, 
reexported and transferred (in-country) to military end uses or 
military end users to the detriment of the national security or foreign 
policy interests of the United States. In addition, publishing a 
proposed rule would give notice of the U.S. Government's intention to 
restrict the export, reexport and transfer of these items and would 
create an incentive to either accelerate exports, reexports and 
transfers of these items to conduct activities that are contrary to the 
national security or foreign policy interests of the United States, 
and/or to take steps to try to limit the impact of the this expanded 
control once a final rule was published. No other law requires that a 
notice of proposed rulemaking and an opportunity for public comment be 
given for this rule. Because a notice of proposed rulemaking and an 
opportunity for public comment are not required to be given for this 
rule by 5 U.S.C. 553, or by any other law, the analytical requirements 
of the Regulatory Flexibility Act, 5 U.S.C. 601 et seq., are not 
applicable. Accordingly, no regulatory flexibility analysis is required 
and none has been prepared.

List of Subjects

15 CFR Part 744

    Exports, Reporting and recordkeeping requirements, Terrorism.

15 CFR Part 774

    Exports, Reporting and recordkeeping requirements.

    Accordingly, parts 744 and 774 of the Export Administration 
Regulations (15 CFR parts 730-774) are amended as follows:

PART 744--[AMENDED]

0
1. The authority citation for 15 CFR part 744 continues to read as 
follows:

    Authority: 50 U.S.C. app. 2401 et seq.; 50 U.S.C. 1701 et seq.; 
22 U.S.C. 3201 et seq.; 42 U.S.C. 2139a; 22 U.S.C. 7201 et seq.; 22 
U.S.C. 7210; E.O. 12058, 43 FR 20947, 3 CFR, 1978 Comp., p. 179; 
E.O. 12851, 58 FR 33181, 3 CFR, 1993 Comp., p. 608; E.O. 12938, 59 
FR 59099, 3 CFR, 1994 Comp., p. 950; E.O. 12947, 60 FR 5079, 3 CFR, 
1995 Comp., p. 356; E.O. 13026, 61 FR 58767, 3 CFR, 1996 Comp., p. 
228; E.O. 13099, 63 FR 45167, 3 CFR, 1998 Comp., p. 208; E.O. 13222, 
66 FR

[[Page 75046]]

44025, 3 CFR, 2001 Comp., p. 783; E.O. 13224, 66 FR 49079, 3 CFR, 
2001 Comp., p. 786; Notice of January 21, 2014, 79 FR 3721 (January 
22, 2014); Notice of August 7, 2014, 79 FR 46959 (August 11, 2014); 
Notice of September 17, 2014, 79 FR 56475 (September 19, 2014); 
Notice of November 7, 2014, 78 FR 67035 (November 12, 2014).


0
2. Revise Sec.  744.17 to read as follows:


Sec.  744.17  Restrictions on certain exports, reexports and transfers 
(in-country) of microprocessors and associated ``software'' and 
``technology'' for ``military end uses'' and to ``military end users.''

    (a) General prohibition. In addition to the license requirements 
set forth elsewhere in the EAR, you may not export, reexport or 
transfer (in-country) microprocessors (``microprocessor 
microcircuits,'' ``microcomputer microcircuits,'' and microcontroller 
microcircuits having a processing speed of 5 GFLOPS or more and an 
arithmetic logic unit with an access width of 32 bit or more, including 
those incorporating ``information security'' functionality), or 
associated ``software'' and ``technology'' for the ``production'' or 
``development'' of such microprocessors without a license if, at the 
time of the export, reexport or transfer (in-country), you know, have 
reason to know, or are informed by BIS that the item will be or is 
intended to be used for a `military end use,' as defined in paragraph 
(d) of this section, in a destination listed in Country Group D:1 (see 
Supplement No. 1 to part 740 of the EAR); or by a `military end user,' 
as defined in paragraph (e) of this section, in a destination listed in 
Country Group D:1.
    (b) Additional prohibition on exporters or reexporters informed by 
BIS. BIS may inform an exporter, reexporter or transferor, either 
individually by specific notice or through amendment to the EAR, that a 
license is required for export, reexport or transfer (in-country) of 
items described in paragraph (a) of this section to specified end 
users, because BIS has determined that there is an unacceptable risk of 
diversion to the end uses or end users described in paragraph (a) of 
this section. Specific notice is to be given only by, or at the 
direction of, the Deputy Assistant Secretary for Export Administration. 
When such notice is provided orally, it will be followed by a written 
notice within two working days signed by the Deputy Assistant Secretary 
for Export Administration. The absence of any such notification does 
not excuse the exporter, reexporter or transferor from compliance with 
the license requirements of paragraph (a) of this section.
    (c) License review standards. There is a presumption of denial for 
applications to export, reexport or transfer (in-country) items subject 
to this section.
    (d) Military end-use. In this section, the phrase `military end 
use' means incorporation into: a military item described on the U.S. 
Munitions List (USML) (22 CFR part 121, International Traffic in Arms 
Regulations) or the Wassenaar Arrangement Munitions List (as set out on 
the Wassenaar Arrangement Web site at http://www.wassenaar.org); 
commodities classified under ECCNs ending in ``A018'' or under ``600 
series'' ECCNs; or any commodity that is designed for the ``use,'' 
``development,'' ``production,'' or deployment of military items 
described on the USML, the Wassenaar Arrangement Munitions List or 
classified under ECCNs ending in ``A018'' or under ``600 series'' 
ECCNs. Supplement No. 1 of this part lists examples of `military end 
use.'
    (e) Military end user. In this section, the term `military end 
user' means the national armed services (army, navy, marine, air force, 
or coast guard), as well as the national guard and national police, 
government intelligence or reconnaissance organizations, or any person 
or entity whose actions or functions are intended to support `military 
end uses' as defined in paragraph (d) of this section.
    (f) Exceptions. The prohibitions described in paragraphs (a) and 
(b) of this section supersede any license exception or No License 
Required (NLR) designation that would otherwise apply to a transaction 
subject to the EAR, except that this license requirement does not apply 
to exports, reexports or transfers (in-country) of items for or on 
behalf of the official use by personnel and agencies of the U.S. 
Government or to agencies of a cooperating government authorized by 
License Exception GOV pursuant to Sec.  740.11 of the EAR. See Sec.  
740.11(b)(1) of the EAR for the definition of `agency of the U.S. 
Government' and Sec.  740.11(c)(1) for the definition of `agency of a 
cooperating government.'

PART 774--[AMENDED]

0
3. The authority citation for part 774 continues to read as follows:

    Authority: 50 U.S.C. app. 2401 et seq.; 50 U.S.C. 1701 et seq.; 
10 U.S.C. 7420; 10 U.S.C. 7430(e); 22 U.S.C. 287c, 22 U.S.C. 3201 et 
seq.; 22 U.S.C. 6004; 30 U.S.C. 185(s), 185(u); 42 U.S.C. 2139a; 42 
U.S.C. 6212; 43 U.S.C. 1354; 15 U.S.C. 1824a; 50 U.S.C. app. 5; 22 
U.S.C. 7201 et seq.; 22 U.S.C. 7210; E.O. 13026, 61 FR 58767, 3 CFR, 
1996 Comp., p. 228; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp., p. 
783; Notice of August 7, 2014, 79 FR 46959 (August 11, 2014).

Supplement No. 1 to Part 774--[Amended]

0
4. In Supplement No. 1 to part 774 (the Commerce Control List), ECCNs 
3A001, 3D002, 3D991, 3E001, 3E002, 3E991, 5A002, 5A992, 5D002, 5D992, 
5E002 and 5E992 are amended by adding a License Requirement Note after 
the Control Table in the License Requirements section to read as 
follows:

Supplement No. 1 to Part 774--Commerce Control List

* * * * *

License Requirements

* * * * *
    License Requirements Note: See Sec.  744.17 of the EAR for 
additional license requirements for microprocessors having a processing 
speed of 5 GFLOPS or more and an arithmetic logic unit with an access 
width of 32 bit or more, including those incorporating ``information 
security'' functionality, and associated ``software'' and 
``technology'' for the ``production'' or ``development'' of such 
microprocessors.
* * * * *

0
5. In Supplement No. 1 to part 774 (the Commerce Control List), 
Category 3, ECCN 3A991 is amended by revising the License Requirements 
Notes to read as follows:

3A991 Electronic Devices, and ``Components'' Not Controlled by 3A001.

License Requirements

* * * * *
    License Requirements Note: See Sec.  744.17 of the EAR for 
additional license requirements for microprocessors having a processing 
speed of 5 GFLOPS or more and an arithmetic logic unit with an access 
width of 32 bit or more, including those incorporating ``information 
security'' functionality, and associated ``software'' and 
``technology'' for the ``production'' or ``development'' of such 
microprocessors.
* * * * *

    Dated: December 11, 2014.
Kevin J. Wolf,
Assistant Secretary for Export Administration.
[FR Doc. 2014-29450 Filed 12-16-14; 8:45 am]
BILLING CODE 3510-33-P


